DATA SHEET SMV1705 Hyperabrupt Tuning Varactors Supplied on Film Frame and Waffle Packs Applications * Wide bandwidth VCOs * VHF and UHF TV tuners * Analog phase shifters Features * Designed for high volume, low-cost battery applications * Low series resistance * High capacitance ratio * Available as: - Full wafer on film frame (SMV1705-099) - Dice in waffle packs (SMV1705-000) * Small footprint chip size: 12 x 12 x 5.5 mils Description Skyworks SMV1705 varactors are silicon hyperabrupt junction varactor diodes specifically designed for battery operation. These devices have a high capacitance ratio and low series resistance, which makes them appropriate for low phase noise Voltage Controlled Oscillators (VCOs) operating at wireless frequencies of 2.5 GHz and higher. The SMV1705-099 is supplied as 100 percent electrically tested, fully singulated wafers mounted on a film frame. The SMV1705000 is supplied as a 100 percent electrically tested die in waffle packs. The absolute maximum ratings of the SMV1705 varactors are provided in Table 1. Electrical specifications are specified in Table 2. Typical performance characteristics are provided in Figures 1 and 2. The SPICE model for the SMV1705 die is shown in Figure 3 and the associated model parameters are provided in Table 3. Die mechanical characteristics are listed in Table 4. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 201124A * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * August 13, 2009 1 DATA SHEET * SMV1705-000 AND SMV1705-099 HYPERABRUPT TUNING VARACTORS Table 1. SMV1705-000/-099 Absolute Maximum Ratings Parameter Symbol Minimum Typical Maximum Units Power dissipation (@ cathode temperature of 25 C PDIS 250 mW Reverse voltage VR 12 V Forward current IF 20 mA Junction temperature TJ -55 +150 C Storage temperature TSTG -55 +150 C Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 2. SMV1705-000/-099 Electrical Specifications (Note 1) (Note 2) (Cathode Temperature = 25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min VBR IR = 10 A Reverse leakage current IR VR = 8 V Junction capacitance CJ1 VR = 1 V, f = 1 MHz 17.3 CJ4 VR = 4 V, f = 1 MHz Capacitance ratio CJ1/CJ4 Series resistance RS Reverse breakdown voltage Typical Max Units 12 V 20 nA 18.3 19.3 pF 5.3 6.1 6.6 pF 2.8 3.0 - 0.32 VR = 1 V, f = 470 MHz Note 1: Performance is guaranteed only under the conditions listed in this Table and is not guaranteed over the full operating or storage temperature ranges. Operation at elevated temperatures may reduce reliability of the device. Note 2: The SMV1705-000 and SMV1705-099 are 100% tested for junction capacitance, capacitance ratio. reverse leakage current, and breakdown voltage. Electrical rejects of the SMV1705-099 devices (singulated wafer on film frame) are identified with black ink. 35 +5 30 +4 Percent of Variation (%) Capacitance (pF) Typical Performance Characteristics 25 20 15 10 5 VR = 1 V +3 VR = 2.5 V +2 +1 0 VR = 4 V -1 -2 -3 0 0 1 2 3 Varactor Voltage (V) Figure 1. Capacitance vs Voltage (TJ = 25 C) 4 5 -4 -40 -20 0 +20 +40 +60 Temperature (C) Figure 2. Relative Capacitance Change vs Temperature Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 +80 August 13, 2009 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 201124A DATA SHEET * SMV1705-000 AND SMV1705-099 HYPERABRUPT TUNING VARACTORS PORT P_anode port = 1 IND LS L = LS RES RS R = RS DIODEM Diode_Model IS = 1.00e-14 RS = 0 N=1 TT = 0 CJO = CJO M=M VJ = VJ EG = 1.11 XTI = 3 KF =0 AF =1 CAP CP C = CP DIODE Varactor_Diode AREA = 1 MODEL = Diode_Model MODE = nonlinear FC = 0.5 BV = 22 IBV = 1e-3 ISR = 0 NR = 2 IKF = 0 NBV = 1 IBVL = 0 NBVL = 1 TBV1 = 0 TNOM = 27 FFE = 1 PORT P_Cathode port = 2 Figure 3. SPICE Model Table 3. SPICE Model Parameters Part Number CJO (pF) VJ (V) M CP (pF) RS () LS (nH) SMV1705-000 31 3 2 0 0.32 0.15 SMV1705-099 31 3 2 0 0.32 0.15 Table 4. SMV1705 Die Characteristics Typical Anode Contact Diameter Typical Quantity of Good Dice Per Wafer (in) (mm) (in) (mm) (in) (mm) SMV1705-000 N/A 0.012 x 0.012 0.3048 x 0.3048 0.0055 0.0005 0.1397 0.0127 0.00675 0.17145 SMV1705-099 60,000 0.012 x 0.012 0.3048 x 0.3048 0.0055 0.0005 0.1397 0.0127 0.00675 0.17145 Part Number Chip Size Chip Thickness Package Outline Drawings Table 4 identifies the die part numbers with their corresponding quantity per wafer and chip measurements. The package outline die drawing for the SMV1705-000 (dice in waffle packs) is shown in Figure 4. The package outline die drawing for the SMV1705099 (full wafer on film frame) is shown in Figure 5. The SMV1705-000 is supplied in quantities of 100 pieces per waffle pack. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 201124A * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * August 13, 2009 3 DATA SHEET * SMV1705-000 AND SMV1705-099 HYPERABRUPT TUNING VARACTORS 0.012 0.002 in (0.3048 0.0508 mm) 0.0067 in (0.1702 mm) 0.012 0.002 in (0.3048 0.0508 mm) 1 1 2 0.0055 0.0005 in (0.1397 0.0127 mm) S1612 2 Figure 4. SMV1705-000 Die Outline Drawing (Dice in Waffle Packs) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 August 13, 2009 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 201124A DATA SHEET * SMV1705-000 AND SMV1705-099 HYPERABRUPT TUNING VARACTORS 0.003 (0.076 mm) Nom. Separation Between Die 0.003 (0.076 mm) Separation Between Die 5.981 (151.92 mm) Outer Ring O.D. 5.520 (140.2 mm) Inner Ring I.D. 3.940 (100 mm) Wafer Dia. Grip Ring Wafer Film Frame Description Wafer on nitto tape Color: light blue Thickness: 2.2-3 mils Tensile strength: 6.6 (lbs. in width) Ring material: plastic 0.236 (5.99 mm) Ring Thickness S1611 Figure 5. SMV1705-099 Die Outline Drawing (Full Wafer on Film Frame) Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 201124A * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * August 13, 2009 5 DATA SHEET * SMV1705-000 AND SMV1705-099 HYPERABRUPT TUNING VARACTORS Ordering Information Model Name Manufacturing Part Number SMV1705-000 (dice, 100 per waffle pack) SMV1705-000 SMV1705-099 (singulated wafer on film frame) SMV1705-099 Copyright (c) 2009 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 August 13, 2009 * Skyworks Proprietary and Confidential information * Products and Product Information are Subject to Change Without Notice * 201124A