DC/DC Converters TEP 100 Series, 100 Watt Features Rugged, compact metal case Easy chassis mount Screw terminal adaptor available UL 60950-1 for easy connection Wide 2:1 input voltage range u Full load operation up to 60C with convection cooling Soft start Under voltage lock-out circuit Reverse input voltage protection (Models pictured with chassis mount adaptor and optional heatsink) Input protection filter 3-year product warranty The TEP-100 Series is a family of isolated high performance dc-dc converter modules with ultra-wide 2:1 input voltage ranges which come in a rugged, sealed metal case. These converters are suitable for a wide range of applications, but the product is designed particularly also for industrial applications where often no PCB mounting is possible but the module has to be mounted on a chassis. Four threaded M3 inserts in the module makes chassis mount or attachment of a heatsink for optimal thermal management very simple. For easy connection there is also an unique adaptor available with screw terminals. A very high efficiency allows an operating temperature up to +60C with natural convection cooling without power derating. Further features include output voltage trimming, Remote On/Off and under voltage lockout. The very wide input voltage range and reverse input voltage protection make these converters also an interesting solution for battery operated systems. Models Order code* Input voltage Output voltage Output current max. Efficiency typ. TEP 100-1210 3.3 VDC 25.0 A 90 % TEP 100-1211 5.0 VDC 20.0 A 91 % 91 % TEP 100-1212 12 VDC 8.4 A 15 VDC 6.7 A 91 % 24 VDC 4.2 A 90 % TEP 100-1216 28 VDC 3.6 A 90 % TEP 100-1218 48 VDC 2.1 A 90 % TEP 100-2410 3.3 VDC 25.0 A 91 % TEP 100-2411 5.0 VDC 20.0 A 93 % 93 % TEP 100-1213 TEP 100-1215 TEP 100-2412 TEP 100-2413 TEP 100-2415 9 - 18 VDC (12 VDC nominal) 18 - 36 VDC (24 VDC nominal) TEP 100-2416 12 VDC 8.4 A 15 VDC 6.7 A 93 % 24 VDC 4.2 A 92 % 28 VDC 3.6 A 92 % 92 % TEP 100-2418 48 VDC 2.1 A TEP 100-4810 3.3 VDC 25.0 A 91 % TEP 100-4811 5.0 VDC 20.0 A 93 % TEP 100-4812 TEP 100-4813 TEP 100-4815 36 - 75 VDC (48 VDC nominal) 12 VDC 8.4 A 93 % 15 VDC 6.7 A 93 % 24 VDC 4.2 A 92 % TEP 100-4816 28 VDC 3.6 A 92 % TEP 100-4818 48 VDC 2.1 A 92 % * - add suffix -CM, -CMF for models with chassis mount adaptor, see last page. - add suffix -N for negative remote control, see page 3 -> Remote On/Off http://www.tracopower.com Page 1 of 6 DC/DC Converters TEP 100 Series 100 Watt Input Specifications Input current at no load 12 Vin; 3.3 - 15 12 Vin; 24 - 48 24 Vin; 3.3 - 15 24 Vin; 24 - 48 48 Vin; 3.3 - 15 48 Vin; 24 - 48 VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 160 mA typ. 100 mA typ. 185 mA typ. 85 mA typ. 90 mA typ. 40 mA typ. Input current at full load 12 Vin models: 9.4 A typ. 24 Vin models: 4.6 A typ. 48 Vin models: 2.3 A typ. Start-up voltage 12 Vin models: 8.5 VDC (or lower) 24 Vin models: 17.5 VDC (or lower) 48 Vin models: 35.5 VDC (or lower) Under voltage shut down (lock-out circuit) 12 Vin models: 7.5 VDC typ. 24 Vin models: 16 VDC typ. 48 Vin models: 34 VDC typ Surge voltage (100 msec. max.) 12 Vin models: 36 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 level A, FCC part 15, level A (chassis mount option -CFM required) EMC immunity - ESD (electrostatic discharge) - Radiated immunity - Fast transient / surge (with external input capacitor) - Conducted immunity Reverse voltage protection EN 50121-3-2 EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 2 kV perf. criteria A Nippon chemi-con KY 200 F, 100 V, ESR 48 Ohm or with chassis mount option -CFM EN 61000-4-6, 10 Vrms, perf. criteria A parallel diode Output Specifications Voltage set accuracy 1 % Output voltage adjustment +10 % / -20 % by external resistor see application note: Regulation - Input variation Vin min. to Vin max. 0.2 % max. - Load variation (0 - 100 %) 3.3 - 15 VDC models: 0.3 % max. 24 - 48 VDC models: 0.3 % max. Temperature coefficient 0.02 %/K Minimum load not required Remote sense 10 % max. of Vout nom. (including trim up value) Ripple and noise (20 MHz Bandwidth) 3.3 & 5 12 & 15 24 & 28 48 http://www.tracopower.com VDC VDC VDC VDC models: models: models: models: 75 mVpk-pk max. 100 mVpk-pk max. 200 mVpk-pk max. 300 mVpk-pk max. Page 2 of 6 DC/DC Converters TEP 100 Series 100 Watt Output Specifications Start up time (nominal Vin and constant resistive load) 25 ms typ. (at power On or remote On) Transient response (25% load step change) 200 s typ. Output current limitation at 110 -140 % of Iout max. Over voltage protection at 115 -130 % of Vout nom. Short circuit protection indefinite, automatic recovery Capacitive load 3.3 & 5 12 15 24 28 48 VDC VDC VDC VDC VDC VDC models: models: models: models: models: models: 40`000 F max. 7`000 F max. 4`460 F max. 1`750 F max. 1`280 F max. 430 F max. General Specifications Temperature ranges - Operating -40C to +75C - Case temperature +105C max. - Storage -55C to +125C Thermal impedance - without Heatsink6.7C/W - with Heatsink4.7C/W Derating See derating graphs page 4 Over temperature protection at 115C Thermal shock acc. MIL-STD-810F Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +70C, ground benign) 331`000 h Isolation voltage (60sec.) - Input/Output 2'250 VDC (basic insulation) - Input/Case 1'600 VDC Isolation capacitance - Input/Output 2500 pF max. Isolation resistance - Input/Output (500 VDC) >1 GOhm min. Switching frequency 300 kHz typ. (puls width modulation) Safety approvals UL 60950-1 , IEC/EN 60950-1 - Certification documents www.tracopower.com/overview/tep100 Remote On/Off - positive logic (standard) Environmental compliance - Reach www.tracopower.com/products/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU - On: - Off: - negative logic (option -N) - On: - Off: - Off idle current: 3 to 12 VDC or open circuit 0 to 1.2 VDC or short circuit pin 1 and 3 0 to 1.2 VDC or short circuit pin 1 and 3 3 to 12 VDC or open circuit 3 mA Application note: www.tracopower.com/overview/tep100 All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 6 DC/DC Converters TEP 100 Series 100 Watt Output Power Derating Models with heatsink Models without heatsink 24 Vin models: Output 3.3-15 VDC 24 Vin models: Output 3.3-15 VDC 24 Vin models: Output 24-48 VDC 24 Vin models: Output 24-48 VDC 48 Vin models: Output 3.3-15 VDC 48 Vin models: Output 3.3-15 VDC 48 Vin models: Output 24-48 VDC 48 Vin models: Output 24-48 VDC http://www.tracopower.com Page 4 of 6 DC/DC Converters TEP 100 Series 100 Watt Specifications Casing material metal Potting material silicone (UL94V-0 rated) Base material FR4 Vibration acc. MIL-STD-810F Dimensions TEP 100 module Pin-Out Pin 1 5 1 - Vin 2 6 2 Case 7 3 Remote On/Off 4 + Vin 5 - Vout 6 - Sense* 7 Trim 8 + Sense* 9 + Vout 0.19 (4.8) 4 9 1.90 (48.26) 1.00 (25.40) 8 0.70 (17.78) 3 0.30 Bottom view (7.62) 2.40 (61.0) 2.00 (50.80) 4 x M3 THD (trough hole) Weight: 97 g (3.42 oz) (0.6) 0.023 0.5 Pin diameter pin 5 & 9: 0.08 (2.0) Pin diameter other pins: 0.04 (1.0) *Sense line to be connected to the output either at the module or at the load under regard of polarity. (5.1) 0.20 (12.7) 2.28 (57.9) 0.95 (11.4) (24.2) 0.45 TEP-HS1 Heatsink (pictured with heatsink mounted) 2.28 (57.9) 2.40 (61.0) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws For to order modules with mounted heatsink ask factory. Top view Weight: 135 g (4.76oz) (Heatsink + Converter) Dimensions in Inch, () = mm Tolerances: 0.02 (0.5) Pin pich tolerances: 0.01 (0.25) Mounting hole pich tolerances: 0.01 (0.25) http://www.tracopower.com Page 5 of 6 DC/DC Converters TEP 100 Series 100 Watt Chassis Mount Adaptor TEP 100 module with chassis mount adabtor (suffix -CM or -CMF) For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection board (soldered to converter pins)and a chassis mount adaptor. In addition this Chassis mount option is available with an EMI-filter(see EMI specification) (17.3) 0.68 1.1 (28.0) Suffix -CM: Chassis mount adaptor Suffix -CMF: Chassis mount adaptor with EMI filter (17.3) 0.68 1.53 (38.8) 2.00 (50.8) 2.40 (61.0) 0.14 screw 2 screw 3 screw 1 Please note that adaptors cannot be ordered as seperate items but are factory assembled. 0.89 (22.2) (3.5) 2.126 (54.0) Connection 1.60 (40.6) 3.071 (78.0) (3.5) 0.14 3.35 (85.0) Pin 4 x O0.17 (4.3) Weight: -CM 200 g (7.05oz) Weight: -CMF 287 g (10.12oz) *Sense line to be connected to the output either at the module or at the load under regard of polarity. 1 - Vin 2 Case 3 Remote On/Off 4 + Vin 5 - Vout 6 - Sense* 7 Trim 8 + Sense* 9 + Vout Dimensions in Inch, () = mm Tolerances 0.02 (0.5) Mounting hole pich tolerances 0.01 (0.25) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 11, 2018 Page 6 of 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEP 100-2411 TEP 100-2415 TEP 100-2412 TEP 100-1215 TEP 100-4815 TEP 100-2415-CMF TEP 100-1210 TEP 100-1212 TEP 100-4812-CMF TEP 100-4811 TEP 100-2416 TEP 100-4816 TEP 100-2411-CMF TEP 1001213 TEP 100-1211-CMF TEP 100-4812 TEP 100-1215-CMF TEP 100-4813 TEP 100-1216-CMF TEP 100-2413 TEP 100-1218-CMF TEP 100-2410-CMF TEP 100-2413-CMF TEP 100-2418 TEP 100-1213-CMF TEP 100-2416CMF TEP 100-4811-CMF TEP 100-1211 TEP 100-1216 TEP 100-4818-CMF TEP 100-1218 TEP 100-2410 TEP 100-4818 TEP 100-2418-CMF TEP 100-2412-CMF TEP 100-1210-CMF TEP 100-4815-CMF TEP 100-4810 TEP 100-4813-CMF TEP 100-1212-CMF TEP 100-4816-CMF