VS-80PF(R)...(W) High Voltage Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 1Document Number: 93527
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Standard Recovery Diodes,
Generation 2 DO-5 (Stud Version), 80 A
FEATURES
• High surge current capability
• Designed for a wide range of applications
• Stud cathode and stud anode version
• Wire version available
• Low thermal resistance
• Designed and qualified for multiple level
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
• Battery charges
• Converters
• Power supplies
• Machine tool controls
•Welding
ELECTRICAL SPECIFICATIONS
PRIMARY CHARACTERISTICS
IF(AV) 80 A
Package DO-5 (DO-203AB)
Circuit configuration Single
80PF(R)... 80PF(R)...W
DO-5 (DO-203AB) DO-5 (DO-203AB)
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IF(AV)
80 A
TC123 °C
IF(RMS) 126 A
IFSM
50 Hz 1200 A
60 Hz 1250
I2t50 Hz 7100 A2s
60 Hz 6450
VRRM Range 1400 to 1600 V
TJ-55 to +150 °C
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
IRRM MAXIMUM
AT TJ = 150 °C
mA
VS-80PF(R)...(W) 140 1400 1650 4.5
160 1600 1900
VS-80PF(R)...(W) High Voltage Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 2Document Number: 93527
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Recommended for pass-through holes
(2) Torque must be applicable only to Hexagon and not to plastic structure, recommended for holed heatsink
Note
• The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at case temperature IF(AV) 180° conduction, half sine wave 80 A
123 °C
Maximum RMS forward current IF(RMS) 126 A
Maximum peak, one-cycle forward,
non-repetitive surge current IFSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = 150 °C
1200
A
t = 8.3 ms 1250
t = 10 ms 100 % VRRM
reapplied
1000
t = 8.3 ms 1050
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
7100
A2s
t = 8.3 ms 6450
t = 10 ms 100 % VRRM
reapplied
5000
t = 8.3 ms 4550
Maximum I2t for fusing I2t t = 0.1 ms to 10 ms, no voltage reapplied 71 000 A2s
Low level value of threshold voltage VF(TO) (16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 0.73 V
Low level value of forward
slope resistance rf(16.7 % x x IF(AV) < I < x IF(AV)), TJ = TJ maximum 3.0 m
Maximum forward voltage drop VFM Ipk = 220 A, TJ = 25 °C, tp = 400 μs rectangular wave 1.46 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction operating and
storage temperature range TJ, TStg -55 to 180 °C
Maximum thermal resistance,
junction to case RthJC DC operation 0.30
K/W
Maximum thermal resistance,
case to heatsink RthCS Mounting surface, smooth, flat and greased 0.25
Allowable mounting torque
Not lubricated threads, tighting on nut (1) 3.4
(30)
N · m
(lbf · in)
Lubricated threads, tighting on nut (1) 2.3
(20)
Not lubricated threads, tighting on Hexagon (2) 4.2
(37)
Lubricated threads, tighting on Hexagon (2) 3.2
(28)
Approximate weight 15.8 g
0.56 oz.
Case style See dimensions - link at the end of datasheet DO-5 (DO-203AB)
RthJC CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
180° 0.14 0.10
TJ = TJ maximum K/W
120° 0.16 0.17
90° 0.21 0.22
60° 0.30 0.31
30° 0.50 0.50
VS-80PF(R)...(W) High Voltage Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 3Document Number: 93527
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
Fig. 3 - Forward Power Loss Characteristics
Fig. 4 - Forward Power Loss Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
0 102030405060708090
110
120
130
140
150
160
Maximum Allowable Case Temperature (°C)
Average Forward Current (A)
80PF(R) Series
140 to 160
RthJC = 0.3 K/W
180° Sine
300
400
500
600
700
800
900
1000
1100
110100
Peak Hal f Sine Wave Forward Current (A)
Number Of Equal Amplitude Half Cycle Current Pulses (N)
70HF(R) Series
Initial T = T Max.
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
At Any Rated Load Condition And With
Rated V Applied Following Surge.
RRM
JJ
80PF(R) Series
140 to 160
200
300
400
500
600
700
800
900
1000
1100
1200
0.01 0.1 1
Peak Half Sine Wave Forward Current (A)
Pulse Train Duration (s)
Maximum Non Repetitive Surge Current
70HF(R) Series
Initial T = T Max.
No Voltage Reapplied
Rated V Reapplied
RRM
Versus Pul se Train Duration.
JJ
80PF(R) Series
140 to 160
0 0.5 1 1.5 2 2.5 3 3.5 4
1
10
100
1000
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
Tj = 25°C
Tj = Tj Max
70HF(R) Series
(140 to 160)
80PF(R) Series
140 to 160
Square Wave Pulse Duration (s)
Transient Thermal Impedance Z thJC (K/W)
0.01
0.1
1
0.0001 0.001 0.01 0.1 1 10
Steady State Value
RthJC = 0.3 K/W
(DC Operation)
80PF(R) Series
80PF(R) Series
140 to 160
VS-80PF(R)...(W) High Voltage Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 4Document Number: 93527
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95345
- 80 = standard device
Device code
62 43 5
80 PF R 160 W
2
- PF = plastic package
3
- None = stud normal polarity (cathode to stud)
R = stud reverse polarity (anode to stud)
4
- Voltage code x 10 = VRRM (see Voltage Ratings table)
6
5
- None = standard terminal
(see dimensions for 80PF(R)... - link at the end of datasheet)
W = wire terminal
(see dimensions for 80PF(R)...W - link at the end of datasheet)
1
VS-
1- Vishay Semiconductors product
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 20-Apr-16 1Document Number: 95345
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DO-203AB (DO-5) for 50PF(R)...(W), 80PF(R)...(W),
and 95PF(R)...(W) Series
DIMENSIONS FOR 80PF(R), 50PF(R), AND 95PF(R) SERIES in millimeters
Ø 15.95 MAX.
Ø 17.15 MAX.
18.9 + 0.1
0.0
3.5 MIN.
2.4 REF.
4 MIN.
4.2 MAX.
6.45 MIN.
Ø 3
Plastic cap.
1.2 MAX.
11 ± 0.4
11.45 MAX.
1/4"28-UNF-2A
17.25 MAX.
25.4 MAX.
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 20-Apr-16 2Document Number: 95345
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS FOR 80PF(R)...(W), 50PF(R)...(W), AND 95PF(R)...(W) SERIES in millimeters
Ø 15.95 MAX.
Ø 17.15 MAX.
18.9
+ 0.1
0.0
2.4 REF.
2.05 MAX.
Plastic cap.
17.25 MAX.
1/4"-28-UNF-2A
11 ± 0.4
11.45 MAX.
25.4 MAX.
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 20-Apr-16 3Document Number: 95345
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS FOR 52PF(R), 82PF(R), AND 97PF(R) SERIES in millimeters
2.4 REF.
6.6 mm2 external lead with
blue or red sleeve insulation
Ø 6.80 - 7.00
11.20 - 12.20
Plastic cap.
1/4"-28-UNF-2A
10.60 - 11.40
11.05 - 11.45
115.00 - 123.00
127.40 - 134.40
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
