1N941UR-1 thru 1N945BUR-1 Available on commercial versions *Qualified Levels: JAN, JANTX, JANTXV and JANS 11.7 Volt Temperature Compensated Zener Reference Diodes Qualified per MIL-PRF-19500/157 (available on some part numbers) DESCRIPTION The popular 1N941UR-1 thru 1N945BUR-1 series of Zero-TC Reference Diodes provides a selection of 11.7 V nominal voltages and temperature coefficients to as low as 0.0002 %/oC for minimal voltage change with temperature when operated at 7.5 mA. Some of these glass, DO-213AA reference diodes are also available in JAN, JANTX, JANTXV and JANS military qualifications. Microsemi also offers numerous other Zener Reference Diode products for a variety of other voltages from 6.2 V to 200 V. DO-213AA Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * * * * Surface mount equivalent of the JEDEC registered 1N941 thru 1N945 series. Standard reference voltage of 11.7 V +/- 5% with tighter tolerances also available for commercial. Internal metallurgical bond. *JAN, JANTX, JANTXV and JANS qualification per MIL-PRF-19500/157 available on 1N941BUR-1, 1N943BUR-1, 1N944BUR-1, and 1N945BUR-1. RoHS compliant versions available (commercial grade only). Also available in: DO-35 (DO-204AH) (axial-leaded) 1N941-1 thru1N945B-1 APPLICATIONS / BENEFITS * * * * Provides minimal voltage changes over a broad temperature range. For instrumentation and other circuit designs requiring a stable voltage reference. Maximum temperature coefficient selections available from 0.01 %/C to 0.0005 %/C. Non-sensitive to ESD per MIL-STD-750, method 1020. MAXIMUM RATINGS Parameters/Test Conditions o Power Dissipation @ TL = 25 C and maximum current (1, 2) I ZM of 39 mA. Junction and Storage Temp Maximum Zener Current Solder Temperature @ 10 s Symbol Value Unit PD 500 mW TJ and TSTG I ZM TSP -55 to +175 39 260 Notes: 1. For optimum voltage-temperature stability, I Z = 7.5 mA (less than 95 mW in dissipated power). o o 2. Derate at 3.33 mW/ C above T A = +25 C. o C mA o C MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 Tel: (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com LDS-0222-1, Rev. 1 (111515) (c)2011 Microsemi Corporation Page 1 of 6 1N941UR-1 thru 1N945BUR-1 MECHANICAL and PACKAGING * * * * * * * * CASE: Hermetically sealed glass case with surface mount DO-213AA (MELF, SOD-80, LL34) package. TERMINALS: Tin-lead plated or RoHS compliant matte-tin plating available (on commercial grade only) and solderable per MILSTD-750, method 2026. MARKING: Cathode band. POLARITY: Reference diode to be operated with the banded end positive with respect to the opposite end. o MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE) of this device is approximately +6PPM/ C. The COE of the mounting surface system should be selected to provide a suitable match with this device. TAPE & REEL option: Standard per EIA-481-B with 12 mm tape. Consult factory for quantities. (Add "TR" suffix to part number.) WEIGHT: 0.2 grams. See Package Dimensions on the last page. PART NOMENCLATURE Applicable to: JAN, JANTX, JANTXV and JANS level 1N941, 1N943, 1N944, and 1N945 only: JAN 1N941 B UR -1 Reliability Level JAN = JAN Level JANTX = JANTX Level JANTXV = JANTXV Level JANS = JANS Level Metallurgically Bonded Surface Mount Package Temperature Coefficient o o range of -55 C to +150 C JEDEC type number (See Electrical Characteristics table) Applicable to: Commercial level 1N941 thru 1N945B: 1N941 A UR -1 -1% (e3) JEDEC type number (See Electrical Characteristics table) RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant Temperature Coefficient range: o o A = -55 C to +100 C o o B = -55 C to +150 C o o Blank = 0 C to +75 C Tighter Reference Tolerance 1% 2% 3% Blank = 5% Surface Mount Package Metallurgically Bonded LDS-0222-1, Rev. 1 (111515) (c)2011 Microsemi Corporation Page 2 of 6 1N941UR-1 thru 1N945BUR-1 SYMBOLS & DEFINITIONS Definition Symbol IR I Z, I ZT, I ZK VZ V ZT Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z), at a specified test point (I ZT), near breakdown knee (I ZK ). Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z) in its breakdown region. Zener Voltage Temperature. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. Z ZT or Z ZK ELECTRICAL CHARACTERISTICS @ 25oC unless otherwise specified. JEDEC TYPE NUMBER (Notes 4) 1N941UR-1 1N941AUR-1 1N941BUR-1 1N942UR-1 1N942AUR-1 1N942BUR-1 1N943UR-1 1N943AUR-1 1N943BUR-1 1N944UR-1 1N944AUR-1 1N944BUR-1 1N945UR-1 1N945AUR-1 1N945BUR-1 ZENER VOLTAGE V Z @ I ZT (Note 3) ZENER TEST CURRENT I ZT MAXIMUM ZENER IMPEDANCE Z ZT @ I ZT (Note 1) Volts 11.12 - 12.28 11.12 - 12.28 11.12 -12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 11.12 -12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 11.12 - 12.28 mA 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Ohms 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 MAXIMUM REVERSE CURRENT IR @ 8 V VOLTAGE TEMPERATURE STABILITY V ZT MAXIMUM (Note 2 & 3) A 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 mV 88 181 239 44 90 120 18 36 47 9 18 24 4 9 12 TEMPERATURE RANGE o C 0 to +75 -55 to +100 -55 to +150 0 to +75 -55 to +100 -55 to +150 0 to +75 -55 to +100 -55 to +150 0 to +75 -55 to +100 -55 to +150 0 to +75 -55 to +100 -55 to +150 EFFECTIVE TEMPERATURE COEFFICIENT VZ o %/ C 0.01 0.01 0.01 0.005 0.005 0.005 0.002 0.002 0.002 0.001 0.001 0.001 0.0005 0.0005 0.0005 *JEDEC Registered Data. NOTES: 1. 2. 3. 4. Measured by superimposing 0.75 mA ac rms on 7.5 mA dc @ 25 oC. The maximum allowable change observed over the entire temperature range i.e., the diode voltage will not exceed the specified mV change at any discrete temperature between the established limits. Voltage measurements to be performed 15 seconds after application of dc current. The 1N941BUR-1, 1N943BUR-1, 1N944BUR-1, and 1N945BUR-1 only are military qualified to MIL-PRF-19500/157 up to the JANS level. LDS-0222-1, Rev. 1 (111515) (c)2011 Microsemi Corporation Page 3 of 6 1N941UR-1 thru 1N945BUR-1 I Z - Operating Current (mA) Change in temperature coefficient (mV/oC) Change in temperature coefficient (%/oC) GRAPHS The curve shown in Figure 1 is typical of the diode series and greatly simplifies the estimation of the Temperature Coefficient (TC) when the diode is operated at currents other than 7.5 mA. EXAMPLE: A diode in this series is operated at a current of 7.5 mA and has specified Temperature Coefficient (TC) limits of +/-0.002 %/oC. To obtain the typical Temperature Coefficient limits for this same diode operated at a current of 6.0 mA, the o new TC limits (%/ C) can be estimated using the graph in Figure 1. At a test current of 6.0mA the change in Temperature Coefficient (TC) is approximately - o o 0.0009 %/ C. The algebraic sum of +/-0.002 %/ C and -0.0009 %/oC gives the new estimated limits of +0.0011 %/oC and -0.0029 %/oC. VZ - Change in Zener Voltage (mV) FIGURE 1 TYPICAL CHANGE OF TEMPERATURE COEFFICIENT WITH CHANGE IN OPERATING CURRENT This curve in Figure 2 illustrates the change of diode voltage arising from the effect of impedance. It is in effect, an exploded view of the Zener operating region of the I-V characteristic. In conjunction with Figure 1, this curve can be used to estimate total voltage regulation under conditions of both varying temperature and current. I Z - Operating Current (mA) FIGURE 2 TYPICAL CHANGE OF ZENER VOLTAGE WITH CHANGE IN OPERATING CURRENT LDS-0222-1, Rev. 1 (111515) (c)2011 Microsemi Corporation Page 4 of 6 1N941UR-1 thru 1N945BUR-1 PD, Rated Power Dissipation (mW) GRAPHS 600 500 400 300 200 100 0 0 25 50 75 100 125 150 T EC , Ambient temperature (C) 175 Zener Impedance ZZT (Ohms) FIGURE 3 POWER DERATING CURVE Operating Current l ZT (mA) FIGURE 4 TYPICAL ZENER IMPEDANCE VS. OPERATING CURRENT LDS-0222-1, Rev. 1 (111515) (c)2011 Microsemi Corporation Page 5 of 6 1N941UR-1 thru 1N945BUR-1 PACKAGE DIMENSIONS NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. DIM BD ECT BL S Inch Millimeter MIN MAX 0.063 0.067 0.016 0.022 0.130 0.146 0.001 MIN MIN MAX 1.60 1.70 0.41 0.56 3.30 3.70 0.03 MIN PAD LAYOUT DIM A B C LDS-0222-1, Rev. 1 (111515) INCH .200 .055 .080 (c)2011 Microsemi Corporation MILLIMETER 5.08 1.40 2.03 Page 6 of 6