D../CRCW.... Vishay Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors FEATURES * High volume product suitable for commercial and special applications * Excellent stability (R/R 1 % for 1000 h at 70 C) * Lead (Pb)-bearing solder contacts on Ni barrier layer * Metal glaze on high quality ceramic * Protective overglaze STANDARD ELECTRICAL SPECIFICATIONS SIZE MODEL INCH METRIC D10/CRCW0402 0402 1005 POWER RATING P70 C W LIMITING ELEMENT VOLTAGE MAX. V 0.063 50 TEMPERATURE TOLERANCE RESISTANCE RANGE E-SERIES COEFFICIENT % ppm/K 100 200 1 5 1R0 - 10M 24 + 96 24 1 5 1R0 - 10M 24 + 96 24 1 5 1R0 - 10M 24 + 96 24 1 5 1R0 - 10M 24 + 96 24 1 5 1R0 - 10M 24 + 96 24 1 5 1R0 - 2M2 24 + 96 24 1 5 1R0 - 10M 24 + 96 24 1 5 1R0 - 10M 24 + 96 24 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 1.5 A D11/CRCW0603 0603 1608 0.10 75 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 2.0 A D12/CRCW0805 0805 2012 0.125 150 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 2.5 A D25/CRCW1206 1206 3216 0.25 200 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 3.5 A CRCW1210 1210 3225 0.33 200 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 4.0 A CRCW1218 1218 3246 1.0 200 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 7.0 A CRCW2010 2010 5025 0.50 400 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 5.0 A CRCW2512 2512 6332 1.0 500 100 200 Zero-Ohm-Resistor: Rmax. = 20 m, Imax. at 70 C = 7.0 A Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. * Marking and packaging: see appropriate catalog or web pages * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material www.vishay.com 114 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20008 Revision: 13-Oct-08 D../CRCW.... Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors Vishay TECHNICAL SPECIFICATIONS D10/ D11/ D12/ D25/ UNIT CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 PARAMETER Rated Dissipation at 70 C (3) W 0.063 0.1 0.125 0.25 0.33 1.0 0.5 1.0 Limiting Element Voltage (2) V 50 75 150 200 200 200 400 500 Insulation Voltage (1 min) Vpeak > 75 > 100 > 200 > 300 > 300 > 300 > 300 > 300 Thermal Resistance (1) K/W 870 550 440 220 140 65 88 65 Insulation Resistance > 109 Category Temperature Range C - 55 to + 155 Failure Rate h-1 0.3 x 10-9 29.5 25.5 40.5 Weight/1000 pieces g 0.65 2 5.5 10 16 Notes (1) For sizes 0402 until 1206 the measuring conditions are in acc. to EN 140401-802. For all other sizes the result depends on the solder pad dimensions. (2) Rated voltage: PxR (3) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded. PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: CRCW0805562RFKTA (4) C MODEL CRCW0402 CRCW0603 CRCW0805 CRCW1206 CRCW1210 CRCW1218 CRCW2010 CRCW2512 R C W VALUE R = Decimal K = Thousand M = Million 0000 = Jumper 0 8 0 5 5 TOLERANCE F=1% J=5% Z = Zero Ohm Jumper 6 2 R TCR K = 100 ppm/K N = 200 ppm/K S = Jumper or special F K T A PACKAGING (5) TA TB TC TD TE TF TG TH TK TI BA TL SPECIAL Up to 2 digits PRODUCT DESCRIPTION: CRCW 0805 5620 F 100 RT1 CRCW 0805 MODEL CRCW SIZE 0402 1201 0603 1218 0805 2010 1206 2512 5620 F RESISTANCE VALUE TOLERANCE 685 = 6.8 M F=1% 224 = 220 k J=5% 1 % = 3 sig.digits, Z = Zero Ohm Jumper plus multiplier 5 % = 2 sig.digits, plus multiplier 100 RT1 TCR 100 ppm/K 200 ppm/K PACKAGING (5) RT5 RT1 RT7 RT6 R02 RT4 R82 R67 RT9 RG1 B27 R20 Notes (4) Preferred (5) Please way for ordering products is by use of the PART NUMBER refer to table PACKAGING, see next page Document Number: 20008 Revision: 13-Oct-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 115 D../CRCW.... Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors Vishay PACKAGING REEL BULK PACKAGING CODE MODEL TAPE WIDTH DIAMETER PITCH PIECES/ REEL PART NUMBER PACKAGING CODE PRODUCT DESC. PIECES PART NUMBER PRODUCT DESC. 50 000 BA B27 25 000 BA B27 10 000 BA B27 PAPER BLISTER PAPER BLISTER D10/CRCW0402 8 mm D11/CRCW0603 8 mm 180 mm/7" 2 mm 10 000 TD RT7 330 mm/13" 2 mm 50 000 TE RF4 180 mm/7" 4 mm 285 mm/11.25" 4 mm D12/CRCW0805 8 mm 330 mm/13" 4 mm 180 mm/7" 4 mm 285 mm/11.25" 4 mm TA TB 20 000 TC TL TI 5000 TA 10 000 TB TI RT1 RG1 RT5 RT6 R20 RT1 RG1 RT5 330 mm/13" 4 mm 20 000 TC TL RT6 R20 180 mm/7" 4 mm 5000 TA TI RT1 RG1 10 000 TB 285 mm/11.25" 4 mm D25/CRCW1206 8 mm 5000 10 000 330 mm/13" 4 mm 15 000 330 mm/13" 4 mm 20 000 180 mm/7" 4 mm RT5 TL R20 TC RT6 5000 TA RT1 CRCW1210 12 mm 285 mm/11.25" 4 mm 10 000 TB RT5 330 mm/13" 4 mm 20 000 TC CRCW1218 12 mm 180 mm/7" 4 mm 4000 TK RT9 CRCW2010 12 mm 180 mm/7" 4 mm 4000 TF R02 CRCW2512 12 mm 180 mm/7" 8 mm 2000 TG R67 4 mm 4000 TH R82 RT6 DIMENSIONS SOLDER PAD DIMENSIONS [in millimeters] SIZE DIMENSIONS [in millimeters] REFLOW SOLDERING INCH METRIC L W H T1 T2 a b l 0402 1005 1.0 0.05 0.5 0.05 0.35 0.05 0.25 0.05 0.2 0.1 0.4 0.6 0.5 0603 1608 1.55 + 0.10 - 0.05 0.85 0.1 0.45 0.05 0.3 0.2 0.3 0.2 0.5 0.9 0805 2012 2.0 + 0.20 - 0.10 1.25 0.15 0.45 0.05 0.3 0.3 0.2 0.7 1206 3216 3.2 + 0.10 - 0.20 1.6 0.15 0.55 0.05 0.45 0.2 0.4 0.2 1210 3225 3.2 0.2 2.5 0.2 0.55 0.05 0.45 0.2 4.6 0.15 0.55 0.05 a b l 1.0 0.9 0.9 1.0 1.3 1.2 0.9 1.3 1.3 0.9 1.7 2.0 1.1 1.7 2.3 0.4 0.2 0.9 2.5 2.0 1.1 2.5 2.2 0.45 0.2 0.4 0.2 1.05 4.9 1.9 1.25 4.8 1.9 + 0.20 - 0.10 1218 3246 2010 5025 5.0 0.15 2.5 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 2.5 3.9 1.2 2.5 3.9 2512 6332 6.3 0.2 3.15 0.15 0.6 0.1 0.6 0.2 0.6 0.2 1.0 3.2 5.2 1.2 3.2 5.2 www.vishay.com 116 3.2 + 0.10 - 0.20 WAVE SOLDERING For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20008 Revision: 13-Oct-08 D../CRCW.... Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors Vishay FUNCTIONAL PERFORMANCE Pulse Load Pmax (W) Single Pulse 1000 2512 1218 2010 1206 0805 0603 0402 100 10 1 0.1 0.01-6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse load, single pulse; applicable if P 0 and n 1000 and U Umax; for permissible resistance change equivalent to 8000 h operation Continuous Pulse Load Pmax (W) Continuous Pulse 100 1218 1206 0805 10 0603 0402 1 0.10 0.01 -6 10 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse load, continuous pulses; applicable if P P (amb) and U Umax; for permissible resistance change equivalent to 8000 h operation Pulse Voltage Umax (V) Pulse Voltage 2000 2512 1800 1600 2010 1400 1200 1000 800 1206/1210/1218 600 400 0805 0603 200 0 -6 10 0402 10-5 10-4 10-3 10-2 10-1 1 10 Pulse Duration ti (s) Maximum pulse voltage, single and continuous pulses; applicable if P Pmax; for permissible resistance change equivalent to 8000 h operation Document Number: 20008 Revision: 13-Oct-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 117 D../CRCW.... Temperature Rise in C 90 80 0402 0603 0805 1206 1210 70 60 50 Rated Power in % Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors Vishay 2010 120 100 80 60 40 2512 30 40 1218 20 20 10 0 0.1 0.2 0.3 0.4 Power in W Non-Linearity A3 in dB Temperature Rise 110 100 90 80 1206 0805 0603 0402 70 60 0 - 55 0.5 - 25 0 25 50 Derating Current Noise in V/V 0 75 70 100 125 155 175 Ambient Temperature in C 100 2 040 10 3 060 5 080 6 120 50 1 40 30 20 10 0.1 100 1K 10K 100K 1M 10M Resistance Value in 100 1K 10K Current Noise 100K 1M 10M Resistance Value in Non-Linearity www.vishay.com 118 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20008 Revision: 13-Oct-08 D../CRCW.... Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors 140 Temperature rise r in C 140 120 100 12 AP 0.. D1 P .A 1. D1 P A .. D D2 5. .A P 80 60 40 120 C s = f [r] 0 Parameter: a 100 a 0.4 40 80 C 60 C C 80 60 C 0 10 40 C 0 0.3 0.2 0.1 20 20 0 0 C 0 14 20 0 40 60 80 100 120 140 160 180 Surface temperature s in C Load in W 0.1 0h 00 0h 00 0h 0 h 0 1 0 5 000 2 Resistance change [ R /R ] in % after 1000 h 0 10 0.01 0.01 R /R (t) = f [R /R (t = 1000 h)] Parameter: Time t= =2 12 r = f [P] Parameter: Size 0.5 Vishay h 00 10 10 1 Resistance change R /R % 1 0K 0.1 1 0M R /R [t = 1000 h] = f [s] Parameter: Resistance value 1 20 1 0.01 0.1 1 M 40 60 80 100 120 140 160 180 Surface temperature s in C 120 a = [C] Stability nomogram typical values (for handling see general explanations) 100 C 0 a =2 80 C 0 a =4 60 0.25 W C 0 a =6 40 0.125 W a 20 0.0625 W 5 7 100 2 3 5 7 60 80 100 =1 C 0 00 a 1 2 3 5 7 10 2 3 Number of mounted resistors [pieces] =8 C 20 a C =1 120 140 Surface temperature s [C] Power rating as a function of packaging density (guideline) Document Number: 20008 Revision: 13-Oct-08 For technical questions, contact: filmresistors.thickfilmchip@vishay.com www.vishay.com 119 D../CRCW.... Vishay Lead (Pb)-bearing Thick Film, Rectangular Chip Resistors TEST PROCEDURES AND REQUIREMENTS EN 60115-1 REQUIREMENTS STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER 1 to 10 M 1 to 10 M - 1% 5% 20/- 55/20 C and 20/125/20 C 100 ppm/K 200 ppm/K U = 2.5 x (P70 x R)1/2 2 x Umax.; Duration: according the style (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) TEST (clause) CONDITIONS OF TEST Stability for product types: D../CRCW... Resistance (4.5) Temperature coefficient (4.8.4.2) Overload (4.13) Aging 4 h at 155 C, dryheat solder bath method; 235 C; 2 s visual examination Solderability (4.17.5) Good tinning ( 95 % covered) no visible damage Resistance to soldering heat (4.18.2) Solder bath method; (260 5) C; (10 1) s (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) Rapid change of temperature (4.19) 30 min at LCT = - 55 C; 30 min at UCT = 125 C; 5 cycles (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) (40 2) C; 56 days; (93 3) % RH (1 % R + 0.05 ) (2 % R + 0.1 ) Climatic sequence (4.23) 16 h at UCT = 125 C; 1 cycle at 55 C; 2 h at LCT = - 55 C; 1 h/1 kPa at 15 C to 35 C; 5 cycles at 55 C U = (P70 x R)1/2 U = Umax.; whichever is less severe (1 % R + 0.05 ) (2 % R + 0.1 ) Endurance at 70 C (4.25.1) U = (P70 x R)1/2 U = Umax.; whichever is less severe 1.5 h ON; 0.5 h OFF; 70 C; 1000 h (1 % R + 0.05 ) (2 % R + 0.1 ) Extended endurance (4.25.1.8) Duration extended to 8000 h (2 % R + 0.1 ) (4 % R + 0.1 ) UCT = 125 C; 1000 h (1 % R + 0.05 ) (2 % R + 0.1 ) Damp heat, steady state (4.24) Endurance at upper category temperature (4.25.3) APPLICABLE SPECIFICATIONS * EN 60115-1 Generic specification * EN 140400 Sectional specification * EN 140401-802 Detail specification * IEC 60068-2-X Variety of environmental test procedures * IEC 60286-3 Packaging of SMD components www.vishay.com 120 For technical questions, contact: filmresistors.thickfilmchip@vishay.com Document Number: 20008 Revision: 13-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1