APS5130PD7C-P22 RGB Color Sensor DESCRIPTION PACKAGE DIMENSIONS The APS5130PD7C-P22 Color Sensor Device, consisting of 3-Channel/1Chip (R, G, B) Si photodiode is a good effective solution to color balance of display backlighting appliances FEATURES Lead-free package Component in accordance with RoHS SMD style package on PCB technology Integral Color Filter in Blue, Green, or Red Package: 1500 pcs / reel Moisture sensitivity level: 3 RoHS Compliant APPLICATIONS The devices are suitable for : Colorimetry Printing process control Display color correction RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. ABSOLUTE MAXIMUM RATINGS at TA=25C (UNLESS OTHERWISE SPECIFIED) Parameter Symbol Value Unit Reverse Voltage VR 10 V Operating Temperature Topr -40 to +85 C Storage Temperature Tstg -40 to +85 C Soldering Temperature Tsd 260 C Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity - Ref JEDEC/JESD625-A and JEDEC/J-STD-033. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 1 / 4 APS5130PD7C-P22 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C (UNLESS OTHERWISE SPECIFIED) Value Symbol IL1 Parameter Condition 100Lux [1] VR = 5V Light Current (1) 1000Lux [1] VR = 5V Unit Min. Typ. Max. Red - 0.039 - Green - 0.042 - Blue - 0.022 - Red - 0.427 - Green - 0.498 - Blue uA IL2 Light Current (2) - 0.262 - D Diameter of the irradiation sensitive area - 2.0 - mm A Irradiation sensitive area per element - 0.85 - mm2 - 0.33 0.25 0.18 - A/W nA SMax Photo sensibility of the single color areas R = 620 nm G = 550 nm B = 470 nm ID Reverse Dark Current VR = 5V - - 10 Red 570 - 670 Green 450 - 650 Blue 370 - 530 Red - 620 - Green - 550 - Blue - 470 - - 120 - 0.1 p Range of spectral bandwidth Wavelength of peak sensitivity 21/2 Angle of half sensitivity uA nm nm deg Notes: 1.White fluorescent light (Color Temperature = 6500K) is used as light source. 2. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Fig.1 Dark Current vs. Ambient Temperature 6.0 Dark current(nA) 5.0 4.0 3.0 2.0 1.0 0.0 0 10 20 30 40 50 60 70 80 Ambient temperature (C) Fig.3 Relative spectral sensitivity (a. u.) Fig.2 Relative Spectral Responsivity vs. W avelength 100% Ta = 25 C 80% R G 60% B 40% 20% 0% 350 400 -15 0 -30 550 600 650 15 30 -45 45 60 -60 75 -75 -90 1.0 500 W avelength (nm) Relative Radiant Sensitivity vs. Angular Displacement Ta = 25 C Relative sensitivity 450 0.5 0.0 (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 0.5 90 1.0 Page 2 / 4 APS5130PD7C-P22 TYPICAL ELECTRO - OPTICAL CHARACTERISTICS CURVES Fig.4 R,G,B LED Test vs. Output Photocurrent 7 Oput Current(uA) 6 Input Pow er=1mW/cm2 5 4 3 2 1 0 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm BLED=461nmn FWHM=20nm Fig.5 R,G,B LED Test vs. Output Photocurrent 80 Oput Current(uA) 70 Input Pow er=10mW/cm2 60 50 40 30 20 10 0 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 BLED=461nmn FWHM=20nm Page 3 / 4 APS5130PD7C-P22 REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 4 / 4