© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 1 / 4
DESCRIPTION
The APS5130PD7C-P22 Color Sensor Device, consisting of
3-Channel/1Chip (R, G, B) Si photodiode is a good effective
solution to color balance of display backlighting appliances
FEATURES
Lead-free package
Component in accordance with RoHS
SMD style package on PCB technology
Integral Color Filter in Blue, Green, or Red
Package: 1500 pcs / reel
Moisture sensitivity level: 3
RoHS Compliant
APPLICATIONS
The devices are suitable for :
Colorimetry
Printing process control
Display color correction
PACKAGE DIMENSIONS
ABSOLUTE MAXIMUM RATINGS at TA=25°C (UNLESS OTHERWISE SPECIFIED)
Note:
1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
APS5130PD7C-P22
RGB Color Sensor
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Parameter Symbol Value Unit
Reverse Voltage VR 10 V
Operating Temperature Topr -40 to +85 °C
Storage Temperature Tstg -40 to +85 °C
Soldering Temperature Tsd 260 °C
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 2 / 4
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C (UNLESS OTHERWISE SPECIFIED)
APS5130PD7C-P22
Notes:
1.White fluorescent light (Color Temperature = 6500K) is used as light source.
2. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Symbol Parameter Condition Value Unit
Min. Typ. Max.
IL1 Light Current (1) 100Lux [1]
VR = 5V
Red - 0.039 -
uA Green - 0.042 -
Blue - 0.022 -
IL2 Light Current (2) 1000Lux [1]
VR = 5V
Red - 0.427 -
uA Green - 0.498 -
Blue - 0.262 -
D Diameter of the irradiation sensitive area - 2.0 - mm
A Irradiation sensitive area per element - 0.85 - mm2
SMax
Photo sensibility of
the single color areas
λ R = 620 nm
λ G = 550 nm
λ B = 470 nm
-
0.33
0.25
0.18
- A/W
ID Reverse Dark Current VR = 5V - - 10 nA
λ 0.1 Range of spectral bandwidth
Red 570 - 670
nm Green 450 - 650
Blue 370 - 530
λp Wavelength of peak sensitivity
Red - 620 -
nm Green - 550 -
Blue - 470 -
2θ1/2 Angle of half sensitivity - 120 - deg
0.5 0.5
90°
15°
0°
30°
45°
60°
75°
-15°
-30°
-45°
-60°
-75°
-90°
0.01.0 1.0
T
a
= 25 °C
Relative Radiant Sensitivity vs. Angular Displacement
Relative sensitivity
0.0
1.0
2.0
3.0
4.0
5.0
6.0
0 1020304050607080
Da rk Cu rre n t vs.
Ambie nt Te m pe rature
Ambient temperature (°C)
Dark current(nA)
0%
20%
40%
60%
80%
100%
350 400 450 500 550 600 650
R
G
B
T
a
= 25 °C
Rela tive S pe ctral Responsivity vs. W a vele ngth
Wavelength (nm)
Relative spectral sensitivity (a. u.)
Fig.1 Fig.2
Fig.3
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 3 / 4
Input Pow er=1mW/cm
2
0
1
2
3
4
5
6
7
RLED=626nmn
FWHM=20nm
GLED=520nmn
FWHM=35nm
BLED=461nmn
FWHM=20nm
Oput Current(uA)
Fig.4 R,G,B LED Test vs. Output Photocurrent
Fig.5 R,G,B LED Test vs. Output Photocurrent
TYPICAL ELECTRO - OPTICAL CHARACTERISTICS CURVES
APS5130PD7C-P22
Input Pow er=10mW/cm
2
0
10
20
30
40
50
60
70
80
RLED=626nmn
FWHM=20nm
GLED=520nmn
FWHM=35nm
BLED=461nmn
FWHM=20nm
Oput Current(uA)
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.4 Date: 09/04/2017 Page 4 / 4
TAPE SPECIFICATIONS (units : mm)
REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS
APS5130PD7C-P22
Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the pr oduct.
PACKING & LABEL SPECIFICATIONS
PRECAUTIONARY NOTES
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to
the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If
customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening
liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes
