© 2000 California Micro Devices Corp. All rights reserved.
7/14/2000 1
PRC200/210
CALIFORNIA MICRO DEVICES
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com
EMI/RFI T-Filter
Features
Suitable for I/O interface cards
Stable resistor-capacitor network
No signal delays
8 EMI/RFI protection lines/package
Saves board space and component cost
Product Description
CAMD’s PRC200/210 Tapped Filter is specifically
designed to suppress EMI/RFI noise at I/O ports of
personal computers and engineering workstations, Local
Area Network (LAN), Asynchronous Transfer Mode
(ATM), Wide Area Network (WAN), and peripheral
accessories. This integrated thin film resistor capacitor
network is available in miniature surface mount pack-
ages which minimizes space and routing problems and
improves reliability and yields.
Why thin film EMI/RFI filters? EMI/RFI filters are needed
to suppress noise at low and high frequencies of the
signal. Ferrite beads used for EMI/RFI filtering are bulky
and ineffective at low frequencies and have saturation
problems at high frequencies. Resistor-capacitor
Applications
EMI/RFI Filter
Low Pass Filter
LCD Panel Display Filters
C1200600
SCHEMATIC CONFIGUARA6TION
networks offer the best technical approach for effective
EMI/RFI filtering. Conventional thick film-based EMI/RFI
filters do not effectively suppress noise at high frequen-
cies due to the fact that EMI/RFI filters using thick film
technology have high parasitic inductance which
becomes the dominant component of the capacitor’s
impedance past resonance, and therefore significantly
affects high frequency performance of the filter.
CAMD’s PRC200/210 Tapped Filter is fabricated on a
silicon substrate using advanced thin film technology.
These EMI/RFI filters have very low parasitic inductance
and suppress EMI/RFI noise at low and high frequencies
to well above 1000 MHz.
20 19 18 17 16 15 14 13 12 11
12345 678910
NOITAMROFNIGNIREDROTRAPDRADNATS
egakcaPrebmuNtraPgniredrO
edoCCRsniPelytSsebuTleeR&epaTgnikraMtraP
T074/05102CIOST/M074/K051002CRPR/M074/K051002CRPM074/K051002CRP
T101/05202CIOST/M101/K052002CRPR/M101/K052002CRPM101/K052002CRP
T181/05202CIOST/M181/K052002CRPR/M181/K052002CRPM181/K052002CRP
T102/05202CIOST/M102/K052002CRPR/M102/K052002CRPM102/K052002CRP
T122/07202CIOST/M122/K072002CRPR/M122/K072002CRPM122/K072002CRP
©2000 California Micro Devices Corp. All rights reserved.
7/14/2000
215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com
2
PRC200/210
CALIFORNIA MICRO DEVICES
SNOITACIFICEPSDRADNATS
)R(ecnareloTetulosbA%01±
)C(ecnarelotetulosbA%02±
egnaRerutarepmeTgnitarepOC°07otC°0
rotsiseR/gnitaRrewoP Wm001
erutarepmeTegarotSC°051otC°56-
gnitaRrewoPegakcaP.xam,W00.1
NOITAMROFNIGNIREDROTRAPDRADNATS
egakcaPrebmuNtraPgniredrO
edoCCRsniPelytSsebuTleeR&epaTgnikraMtraP
T005/00402CIOST/M005/K004002CRPR/M005/K004002CRPM005/K004002CRP
T033/07402CIOST/M033/K074002CRPR/M033/K074002CRPM033/K074002CRP
T101/10102CIOST/M101/K101002CRPR/M101/K101002CRPM101/K101002CRP
T074/05102POSQT/M074/K051012CRPR/M074/K051012CRPM074/K051012CRP
T101/05202POSQT/M101/K052012CRPR/M101/K052012CRPM101/K052012CRP
T181/05202POSQT/M181/K052012CRPR/M181/K052012CRPM181/K052012CRP
T102/05202POSQT/M102/K052012CRPR/M102/K052012CRPM102/K052012CRP
T122/07202POSQT/M122/K072012CRPR/M122/K072012CRPM122/K072012CRP
T005/00402POSQT/M005/K004012CRPR/M005/K004012CRPM005/K004012CRP
T033/07402POSQT/M033/K074012CRPR/M033/K074012CRPM033/K074012CRP
T101/10102POSQT/M101/K101012CRPR/M101/K101012CRPM101/K101012CRP
NOITAMROFNIGNIREDROTRAPDRADNATS-NON
)elpmaxE(102CRP XXX 1TXXX2T
seireStraPedoCRecnareloTRedoCCecnareloTC
CIOS-002CRP%01±-K%01±-K
POSQ-012CRP%02±-M%02±-M
California Micro Devices can develop a fully customized solution which embodies the configuration shown in this data
sheet or modified to suit specific application requirements. A Non-Recurring Engineering (NRE) charge will apply for
all fully customized requirements and a minimum order/lot will be required.
Please direct your detailed circuit configuration and specification requirements to your local CAMD representative or
to the factory for a quotation.
SEULAVDRADNATS
(R
)
%01±
)fp(C
%01±
nwodkaerB
egatloV
)xam(
CR
edoC *db3@cf
5174V651T074/051zHM622
52001V551T101/052zHM46
52081V47T181/052zHM53
52002V46T102/052zHM23
72022V65T122/072zHM72
0405V941T005/004zHM08
7433V922T033/074zHM301
001001V551T101/101zHM61
SNOITACIFICEPSDRADNATS-NON
)R(ecnareloTetulosbA%01±
)C(ecnareloTetulosbA%01±
SEULAVDRADNATS-NON
egnaRecnatsiseR01001ot
egnaRecnaticapaCFp081otFp51
* With 0 source imedance.