
MICRO-D
TEL:(416) 291-4401 FAX: (416) 292-0647 NA TOLL FREE 1-866-816-6540 E-MAIL:SALES@AMPHENOLCANADA.COM
7
SPECIFICATIONS
The Amphenol microminiature connector series
offers proven military spec performance and reliability in
rectangular and strip line micro connectors. Microminiature
connectors are available in rectangular D, strip and custom
card edge configurations, with contacts on .050 (1.27)
centres. Inserts in micro-d miniature connectors with signal
and coax/power contacts are also available.
The Amphenol microminiature contact system employs a
precision stamped and formed pin contact recessed within
the plug insulator. The socket contact is a precision
fabricated tube. Pin and socket contacts are epoxy retained
in high grade thermoplastic insulators.
The contact system has proven reliability, exceeding the
performance specifications of MIL-DTL-83513.
Terminations are available in a broad range including solder
cup, terminated to wire harness, vertical and right angle
PCB. Plastic and metal shell versions are available, in a
broad range of shell finishes. A broad range of mounting
hardware is available (jackscrews, posts, guide pins)
as well as straight and angled back-shells.
MICROMINATURE CONNECTOR
The following data applies to a standard Amphenol Canada micro-d connector with wires
or pcb termination. Variations from standard products may cause performance to vary from
that mentioned below. Consult factory for special applications and requirements.
Shell Material Std. Metal (100, 106, 110 & M13 Series): Aluminum alloy 6061-T6 per QQ-A-200/8
104 Series: Stainless steel
Std. Plastic (101, 102 & 105 Series): Polyphenylene sulfide (Ryton)
High Temp Plastic: High performance thermoplastic (PEEK or equivalent)
Shell Finish Anodize **
(Metal Shell Only) Cadmium
Gold
Irridite/Alodine **
Electroless Nickel
Tin
Insulator / PCB Backshell Polyphenylene sulfide (Ryton) per MIL-M-24519, type GST-40F; colour: black
Contacts Copper alloy, 50 micro-inches gold plate over nickel
Hardware Stainless steel, passivated
Potting Material Std. Epoxy: EP1730-1 or equivalent; colour: black
High Temp Epoxy: EP173859 or equivalent
Wire Insulated Wire: MIL-W-16878/4 or /6 (available 7 or 19 strands)
MIL-W-22759/11 or /33
Solid Uninsulated Wire: Copper per A-A-59551 (QQ-W-343)
Coupling Friction or Jackscrews into jackposts/threaded Inserts
Contact Spacing .050 (1.27) centers
Shell Styles (Gender) Plug (pin contacts) and receptacle (socket contacts)
Number of Contacts Standard Micro-d: 9, 15, 21, 25, 31, 37, 51, 69, 100
Combo (Hybrid) Micro-d: 7W2 or 7C2 (5 signal, 2 power/coax)
24W4 or 24C4 (20 signal, 4 power/coax)
High Density Connector (106 Series): 50, 54, 58, 62, 66, 70, 74, 104, 112, 120, 128, 136, 144, 152
Strip Connector (105 Series): 1 thru 30 (no guide pins)
1 thru 29 (guide pin on one end)
1 thru 28 (guide pin on both ends)
Coaxial Cable RG-178/U
Wire Size #24 thru #32 AWG (largest to smallest diameter)
Contact Termination Multiple indent crimp
Specifications
Amphenol®
Canada