Keypads S.series Contents S.series Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Keypads ........................................................................................................... 5 Technical Data................................................................................................. 6 Drawings.......................................................................................................... 7 Index............................................................................................................... 11 2 10.2008 Description S.series Product Information General notes The 12 or 16 key S.series keypads are specially designed for public environment applications, such as vending machines, ticket machines, payment terminals, telephones, access control systems and industrial machinery. Keys and housing are built from chrome plated zinc alloy (Zamak). The S.series therefore has high resistance to impact and vandalism and is also sealed to IP 67. Mounting The keypad may be mounted from either the front or rear of a panel. Front mounted keypads require a small cutout for the pin header connector on the back side of the S.series. Rear mounted keypads are mounted through a rectangular cutout. To ensure IP 67 sealing a gasket is supplied with the keypad and this is suitable for both forms of mounting. Contacts To ensure integrity of contacts and lower switch ratings, the contacts are gilded and external connection to the keypad is by means of a pin header on the back. The electrical keypad circuit can be supplied in a choice of either matrix or common point configuration. Keys The metal anti pull-off keys are highly resistant to shock and fire. Marking Non-illuminated keys are engraved with the characters filled in black. Custom markings or symbols in different colours are available on request. Illuminated keys are moulded with characters that are cutout then filled with a clear resistant resin for clear illumination. Illumination On illuminated versions the keys are individually lit with yellow or blue LED's which them especially suitable in poorly lit locations. Other LED colours are available on request. NOTE A load resistor may need to be connected by the customer in order to power the LEDs correctly. Luminostity and wave length scattering caused by technologie used in the LED manufactering processes may lead to visual differences in our products. We reserve the right to modify technical data All dimensions in mm 3 10.2008 S.series Product Assembly Keypad 12 keys, back mounting 1 Front panel 2 Gasket 3 Keypad 0 Keypad 16 keys, front mounting 1 Keypad 2 Gasket 3 Front panel 0 4 10.2008 S.series Keypads Keypad 12 Hexadecimal black without Telephone LED blue LED yellow Telephone black without a 63 x 82 mm Typ-Nr. Technical drawing LED yellow P M P M P M P M P M P M b 82 x 82 mm Typ-Nr. S.16300.211 S.16350.211 S.16300.241 S.16350.241 S.16300.001 S.16350.001 Mounting dimensions 16 Illumination LED blue Component layout PH Marking Hexadecimal Circuit IP 67 Key cap Zamak chromed No. of keys Terminals Keypad non-removable metal keys, vandal resistant Front protection Continuation see next page e S.12100.211 S.12150.211 S.12100.241 S.12150.241 S.12100.001 S.12150.001 4 1 4 1 4 1 3 2 3 2 3 2 2 2 2 2 2 2 1 1 1 1 1 1 2 2 2 2 2 2 1 1 1 1 1 1 0.650 0.650 0.650 0.650 0.650 0.650 0.550 0.550 0.550 0.550 0.550 0.550 Other options on request : Custom colours, LED colours and markings Terminals: PH = Pin header Circuit: P = Common point, M = Matrix Component layout from page 7, Mounting dimensions from page 9, Technical drawing from page 10 5 10.2008 S.series Technical Data Climate resistance as per EN IEC 60512-6 Damp heat 21 days Dry heat 10 days, +85 C Saline mist 96 hours Keypad Material Keys Zamak 5 with chrome finish Housing Zamak 5 with chrome finish Back plate Steel chromated Contacts Carbon pills Carbon on Cu tracks Mechanical characteristics Actuating force 1 N ... 3 N Actuating travel 1.5 mm 0.3 mm Rebound time 40 ms Electrical characteristics Operating voltage/-current Nominal 5 V, 5 mA Maximum voltage 24 V Minimum voltage 0.5 V Minimum current 0.1 mA Illumination Current consumption for single LED: 20 mA at 2.1 V (yellow and green) 20 mA at 1.9 V (red) 10 mA at 3.4 V (blue) Isolation resistance 1000 M at 100 VDC Contact resistance 200 Electrical life 4 Million cycles of operation per key Electrostatic breakdown value 5 kV Electric strength 1500 Vrms, 50 Hz, 1 min., as per EN IEC 60512-2 Environmental conditions Storage temperature -30 C ... +85 C Operating temperature -25C ... +85C Front protection IP 67 as per IEC 60529, when mounted 6 10.2008 Impact resistance IK10 (20 J) Approvals Declaration of conformity CE RoHS S.series Drawings Component layout 1 Keypad page 5 Rear view Male pin connector HE13 Contacts layout Hexadecimal 4 10 9 1 4 7 A 2 5 8 0 3 6 9 B NC = Not connected Female mating connector HE13 not part of delivery F E D C 7 6 8 16 LED 3 5 9 4 10 3 + LED / NC 11 2S 1S - LED / NC 12 5 6 7 8 + 11 - 12 for illuminated version only S1 Security shunt S2 12 keys, Matrix, Hexadecimal 2 Keypad page 5 Contacts pin-out Telephone 4 10 9 2 5 8 0 3 6 9 # 12 LED 3 1 4 7 Rear view Male pin connector HE13 Female mating connector HE13 not part of delivery 7 NC 8 9 10 + LED / NC 11 - LED / NC 12 NC = Not connected 6 5 4 3 2S 1S 5 6 7 + 11 - 12 for illuminated version only S1 Security shunt S2 12 keys, Matrix, Telephone 7 10.2008 S.series Drawings 3 Keypad page 5 Contacts layout Telephone Rear view Male pin connector HE13 Female mating connector HE13 not part of delivery 7 8 9 10 NC 11 2 3 4 5 6 7 8 9 10 21 NC = Not connected 6 5 4 3 2 1 NC 12 LED 1 2 3 4 5 6 7 8 9 0 # 20 19 Cp 18 + 16 - 15 NC 12 S 13 S 14 - LED / NC 15 + LED / NC 16 for illuminated version only S 13 Security shunt 22 NC 21 20 19 18 Cp S 14 17 NC 12 keys, Common point, Telephone 4 Keypad page 5 Contacts layout Hexadecimal Rear view Male pin connector HE13 5 6 7 10 2 4 8 11 1 3 9 12 22 21 18 13 Female mating connector HE13 not part of delivery NC = Not connected 7 6 8 5 4 9 3 10 2 1 11 16 LED 1 2 3 F 4 5 6 E 7 8 9 D A 0 B C Cp 14 + 16 - 15 12 for illuminated version only S 19 Security shunt S 20 22 21 20 S 19 S 13 Cp 14 - LED / NC 15 + LED / NC 16 18 17 NC 12 keys, Common point, Hexadecimal 8 10.2008 S.series Drawings Mounting dimensions 1 Keypad page 5 Rear panel mounting Front panel mounting 74 +- 0.1 74 +- 0.1 35 min. 63 +0.2 0 4 x M6 stud 27.5 10 min. 93 -+ 0.1 82 93 -+ 0.1 +0.2 0 R2 4 x O 6.6 18 min. 12 keys 2 Keypad page 5 Rear panel mounting Front panel mounting 93 +- 0.1 93 +- 0.1 35 min. 82 +0.2 0 4 x M6 stud 27.5 10 min. 93 -+ 0.1 82 +0.2 0 93 -+ 0.1 R2 4 x O 6.6 18 min. 16 keys 9 10.2008 S.series Drawings Technical drawing 1 Keypad page 5 96 O 6.6 63 27.5 2.54 Male pin connector HE13 6.2 11.6 82 10 x 2.54 Location mark for blind Matrix 19 93 -+ 0.1 115 90 Common point R11 19 74 8.6 27.5 11.6 11 x 2.54 Engraving width = 1 mm 8.5 12 + - 0.1 13.5 2 Keypad page 5 115 O 6.6 82 27.5 11 x 2.54 27.5 2.54 Male pin connector HE13 6.2 11.6 82 10 x 2.54 Location mark for blind 19 93 -+ 0.1 115 90 Common point Matrix 11.6 Engraving width = 1 mm R11 19 93 -+ 0.1 8.6 8.5 12 13.5 10 10.2008 Index from Typ-Nr. Typ-Nr. S.12100.001 S.12100.211 S.12100.241 S.12150.001 S.12150.211 S.12150.241 S.16300.001 S.16300.211 S.16300.241 S.16350.001 S.16350.211 S.16350.241 Page Typ-Nr. Page Typ-Nr. Page ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 ................................. 5 11 10.2008