VS-300U(R) Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 1Document Number: 93508
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Standard Recovery Diodes,
(Stud Version), 300 A
FEATURES
Alloy diode
Popular series for rough service
Stud cathode and stud anode version
Designed and qualified for industrial level
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
Welders
Power supplies
Motor controls
Battery chargers
General industrial current rectification
ELECTRICAL SPECIFICATIONS
PRIMARY CHARACTERISTICS
IF(AV) 300 A
Package DO-9 (DO-205AB)
Circuit configuration Single
DO-9 (DO-205AB)
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IF(AV)
300 A
TC150 °C
IFSM
50 Hz 6550 A
60 Hz 6850
I2t50 Hz 214 kA2s
60 Hz 195
VRRM Range 400 V
TJ-65 to +200 °C
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VRRM,
MAXIMUM REPETITIVE PEAK
REVERSE VOLTAGE
V
VRSM,
MAXIMUM NON-REPETITIVE PEAK
REVERSE VOLTAGE
V
IRRM MAXIMUM
AT TJ = 175 °C
mA
VS-300U(R)..
10 100 200
40
20 200 300
30 300 400
40 400 500
60 600 700
VS-300U(R) Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 2Document Number: 93508
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) 302U-A uses case style B-26
Note
The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at case temperature IF(AV) 180° conduction, half sine wave 300 A
130 °C
Maximum peak, one cycle forward,
non-repetitive surge current IFSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
6550
A
t = 8.3 ms 6850
t = 10 ms 100 % VRRM
reapplied
5500
t = 8.3 ms 5750
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
214
kA2s
t = 8.3 ms 195
t = 10 ms 100 % VRRM
reapplied
151
t = 8.3 ms 138
Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied 2140 kA2s
Maximum value of threshold voltage VF(TO)
TJ = 200 °C
0.610 V
Maximum value of forward
slope resistance rf0.751 m
Maximum forward voltage drop VFM Ipk = 942 A, TJ = 25 °C 1.40 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction operating and
storage temperature range TJ, TStg -65 to +200 °C
Maximum thermal resistance,
junction to case RthJC DC operation 0.18
K/W
Maximum thermal resistance,
case to heatsink RthCS Mounting surface, smooth, flat and greased 0.08
Maximum allowed mounting torque
+0 -20 %
Not lubricated threads 37 Nm
Lubricated threads 28
Approximate weight 250 g
Case style (JEDEC®) see dimensions - link at the end of datasheet DO-9 (DO-205AB) (1)
RthJC CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
180° 0.020 0.015
TJ = TJ maximum K/W
120° 0.024 0.025
90° 0.031 0.034
60° 0.045 0.047
30° 0.077 0.077
VS-300U(R) Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 3Document Number: 93508
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
Fig. 3 - Forward Power Loss Characteristics
Fig. 4 - Forward Power Loss Characteristics
Average Forward Current (A)
Maximum Allowable Case Temperature (°C)
120
140
160
180
200
0 50 100 150 200 250 300 350
30° 60° 90° 120° 180°
Conduction Angle
300U40AM20
RthJC (DC) = 0.18 K/W
Average Forward Current (A)
110
120
130
140
150
160
170
180
190
200
0 100 200 300 400 500
DC
30° 60°
90°
120° 180°
Conduction Period
300U40AM20
RthJC (DC) = 0.18 K/W
Maximum Allowable Case Temperature (°C)
Average Forward Current (A)
Maximum Average Forward Power Loss (W)
Maximum Allowable Ambient Temperature (°C)
0
50
100
150
200
250
300
350
400
0
RMS Limit
180°
120°
90°
60°
30°
Conduction Angle
300U40AM20
Tj = 200°C
25 50 75 100 125 150 175 200
3 K/W
1.5 K/W
1 K/W
0.7 K/W
0.5 K/W
0.4 K/W
0.3 K/W
0.2 K/W
RthSA = 0.1 K/W - Delta R
0 50 100 150 200 250 300 350
Average Forward Current (A)
Maximum Average Forward Power Loss (W)
Maximum Allowable Ambient Temperature (°C)
50 75 100 125 150 175 200
3 K/W
1.5 K/W
1 K/W
0.7 K/W
0.3 K/W
0.2 K/W
0.5 K/W
RthSA = 0.1 K/W - ΔR
0
50
100
150
200
250
300
350
400
450
500
0 100 200 300 400 500
DC
180°
120°
90°
60°
30°
RMS Limit
Conduction Period
Tj = 200°C
300U40AM20
VS-300U(R) Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 4Document Number: 93508
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current
Fig. 7 - Forward Voltage Drop Characteristics
Fig. 8 - Thermal Impedance ZthJC Characteristic
Peak Half Sine Wave Forward Current (A)
Number Of Equal Amplitude Half Cycle Current Pulses (N)
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
11010
0
Initial Tj = 200°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
At Any Rated Load Condition And With
Rated Vrrm Applied Following Surge.
300U40AM20
Pulse Train Duration (s)
Peak Half Sine Wave Forward Current (A)
1500
2000
2500
3000
3500
4000
4500
5000
5500
6000
6500
7000
0.01 0.1 1
Maximum Non Repetitive Surge Current
Initial Tj = 200°C
No Voltage Reapplied
Rated Vrrm Reapplied
Versus Pulse Train Duration.
300U40AM20
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
10
100
1000
10000
0 0.5 1 1.5 2 2.5 3
Tj = 25°C
Tj = 200°C
300U40AM20
Square Wave Pulse Duration (s)
Transient Thermal Impedance Z thJC (K/W)
0.001
0.01
0.1
1
0.0001 0.001 0.01 0.1 1 10
Steady State Value
RthJC = 0.18 K/W
(DC Operation)
300U40AM20
VS-300U(R) Series
www.vishay.com Vishay Semiconductors
Revision: 11-Jan-18 5Document Number: 93508
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ORDERING INFORMATION TABLE
LINKS TO RELATED DOCUMENTS
Dimensions www.vishay.com/doc?95340
Device code
5 761 32 4
30VS- 0 U 40 A M20
2
- 0 = standard device
2 = 300U top threaded version
- • U = stud normal polarity (cathode to stud)
• UR = stud reverse polarity (anode to stud)
4
- Voltage code x 10 = V
RRM
(see Voltage Ratings table)
5
6- A = essential part number
-30 = essential part number
1
- Vishay Semiconductors product
3
7- None = stud base DO-9 (DO-205AB) 3/4" 16UNF-2A
M20 = Metric device M20 x 1.5 (available with standard device only)
Outline Dimensions
www.vishay.com Vishay Semiconductors
Revision: 15-Mar-17 1Document Number: 95340
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DO-9 (DO-205AB) and B-26 for 300U(R) Series
DIMENSIONS FOR 300U(R)-A SERIES - DO-9 (DO-205AB) in millimeters (inches)
DIMENSIONS FOR 302U(R)-A SERIES - B-26 in millimeters (inches)
19.18 (0.755)
Max.
Ø 8.89 (0.350)
Ø 8.38 (0.330)
11.51 (0.453)
10.74 (0.423)
3.18 (0.125)
Max.
Unthreaded
portion Ø 19.02 (0.749)
Max.
31.75 (1.250)
30.94 (1.218) Across ats
9.27 (0.365)
7.87 (0.310)
Ø 27.94 (1.10)
Max.
4.32 (0.170)
Max.
13.46 (0.530)
11.94 (0.470)
149.9 (5.90)
134.6 (5.30)
53.34 (2.10)
Max.
21.03 (0.83)
20.14 (0.79)
3/4" 16UNF-2A
for metric device: M20 x 1.5
contact factory
Ø 9.50 (0.374)
Max.
16.51 (0.65)
14.99 (0.59) 18.29 (0.72)
16.76 (0.66)
Ø 27.94 (1.10)
Max.
9.27 (0.365)
7.87 (0.310)
31.75 (1.250) Max.
Across ats
3.18 (0.125)
Max.
Ø 19.02 (0.749)
Max.
3/8"-24UNF-2A
58.67 (2.31)
55.63 (2.19)
28.45 (1.12)
Max.
21.03 (0.828)
20.14 (0.793)
Across ats
3/4" 16UNF-2A
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED