Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
with extended switching distance
Ni14-M18-AP6X
●threaded barrel, M18 x 1
●chrome-plated brass
●extended switching distance
●3-wire DC, 10...30 VDC
●normally open pnp output
●cable connection
Wiring diagram
Function principles
Inductive proximity switches are designed
for wear-free non-contact detection of me-
tal objects. For this they use a high-fre-
quency electro-magnetic AC field that
interacts with the target. With conventional
inductive sensors, this field is generated by
an LC resonant circuit with a ferrite core
coil.
BN
BU
BK
+
pnp
Type Ni14-M18-AP6X
Ident-No. 4611401
Rated operating distance Sn 14 mm
Mounting mode non-flush
Hysteresis (switching distance) 3... 15 %
Min. repeat accuracy ≤ 2 %
Temperature drift ≤ ± 10 %
Operating temperature -25 ...+ 70 °C
Rated operational voltage (DC) UB10... 30 VDC
Max. ripple ≤ 10 % Upp
Rated operational current (DC) Ie≤ 200 mA
No-load current I0≤ 15 mA
Max. OFF-state current ≤ 0,1 mA
Max. switching frequency ≤ 0,5 kHz
Rated insulation voltage ≤ 0,5 kV
Output function 3-wire, normally open, PNP
Short-circuit protection yes, cyclic
Max. voltage drop at Ie≤ 1,8 V
Wire breakage / reverse polarity protection yes / complete
Housing style threaded barrel; M18 x 1
Dimensions 54 mm
Housing material metal, CuZn, chrome-plated
Active face plastic, PA12-GF30
Max. fixing torque of coupling nut 25 Nm
Wiring cable
Cable Ø 5,2, LifYY, PVC, 2 m
Cable cross section 3 x 0,34 mm2
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 x g (11 ms)
Degree of protection IP67
Switching status indication LED yellow
24/4
45
50
4
LED
10
M18 x 1
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
with extended switching distance
Ni14-M18-AP6X
Mounting instructions minimum gap
Gap D 3 x B
Gap W 3 x Sn
Gap T 3 x B
Gap S 1,5 x B
Gap G 6 x Sn
Gap N 2 x Sn
Diameter of active face B Ø 18 mm
G
D
S
T
N
W
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition: • 15.04.2004
Accessories
Subject to change without notice • © Hans Turck GmbH & Co.KG 2002 • Edition:
Hans Turck GmbH & Co.KG • Postfach • D-45466 Mülheim an der Ruhr • Telefon 02 08/49 52-0 • Telefax 02 08/49 52-264
Inductive sensor
with extended switching distance
Ni14-M18-AP6X
Typ Ident-
No.
Description Dimension drawing
QM-18 6945102 quick-mount fixing clamp with dead-stop; material:
chrome-plated brass external thread M24 x 1,5.
BST-18B 6947214 fixing clamp with dead-stop; material: PA6
30/5
ø 18
36
20,5
ø 18
24
30
28 40
M5
20
