KGA Series Single Row PCB Connectors, French Railways approved * 12 HC contacts O 0.76 mm * 1 row PCB connector * 2.54 mm pitch * 3 mm Width * 5000 mating-unmating cycles Technical Characteristics MATERIAL Insulator Pin & socket body Socket wires Guides MOUNTING By screw. Bracket mounting option available only for receptacle Thermoset Brass Brass PLATING Pin and socket wires GUIDING PINS 2 overmoulded keying systems in the plug Copper alloy DIELECTRIC WITHSTANDING VOLTAGE CURRENT RATING 1300 VRMS 4 A Max (25 C) Au/Ni Guides Ni PITCH 2.54 mm CONTACT RESISTANCE < 5 m O 0.76 mm, non-removable TEMPERATURE RANGE -55 C, +125 C PIN SEPTEMBER 2006 INSULATION RESISTANCE > 105 M (500 Vcc) 63 KGA Series Ordering information K G A 012 -- -- --- SERIES MODEL 1 row NUMBER OF CONTACTS 012 PART - POLARITY - PLATING 13 Male plug 22 Female receptacle 17 Male plug, tinned terninations* 26 Female receptacle, tinned terminations* 40 Solder cup TERMINATIONS 10 Bent 90 30 Straight MOUNTING 117 Transverse mounting (plug) 117 Transverse mounting (receptacle) 120 Axial mounting (receptacle) *Tin plating is only available for bent or straight terminations (10 and 30) 64 SEPTEMBER 2006 KGA Series Connector dimensions Plug Receptacle Contact layout Wiring side view Dimensions are in mm SEPTEMBER 2006 65 KGA Series Terminations Plug Receptacle 90 termination 90 termination Ref: 10 Ref: 10 Straight Ref: 30 Straight Ref: 30 Solder cup Ref: 40 Solder cup Ref: 40 Solder cup Dimensions are in mm 66 SEPTEMBER 2006 KGA Series Mounting Plug Receptacle Standard transverse Fixation perpendiculaire standard Standard transverse mounting Transverse Ref: 117 ransverse mounting Vertical Ref: 120 rtical mounting Dimensions are in mm SEPTEMBER 2006 67 KGA Series Board and panel preparation details Mother board For vertical mounting receptacle Daughter board Bent termination plug Bent termination receptacle Panel Vertical mounting receptacle Notes PCB and panel connector wiring side view Dimensions are in mm 68 SEPTEMBER 2006