https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE for high switch-on currents, consisting of PLC-BSP.../1 IC/ACT basic terminal block with spring-cage connection and plug-in miniature relay, for mounting on DIN rail NS 35/7,5, max. switch-on current up to 130A, 1 N/O contact, input voltage 24VDC Your advantages Direct connection of load return line thanks to actuator version Efficient connection to system cabling using V8 adapter Safe isolation according to DIN EN 50178 between coil and contact Max. inrush current of 130 A Functional plug-in bridges Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356050821 Weight per Piece (excluding packing) 61.160 g Custom tariff number 85364190 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm 02/11/2020Page1/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Technical data Dimensions Depth 94 mm Ambient conditions Ambient temperature (operation) -40 C ... 60 C Ambient temperature (storage/transport) -40 C ... 85 C Coil side Nominal input voltage UN 24 VDC Typical input current at UN 18 mA Typical response time 8 ms Typical release time 10 ms Protective circuit Reverse polarity protection Polarity protection diode Free-wheeling diode Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.43 W Contact side Contact type 1 N/O contact Type of switch contact Single contact Contact material AgSnO Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) Minimum switching voltage 12 V AC/DC (at 100 mA) Min. switching current 100 mA (at 12 V DC) Maximum inrush current 80 A (for 20 ms) 130 A (peak, at capacitive load, 230 V AC, 24 F) Limiting continuous current 6A 10 A (the value is permissible if both connections 13, both connections 14 and both connections BB are bridged) Interrupting rating (ohmic load) max. 144 W (at 24 V DC) 58 W (at 48 V DC) 48 W (at 60 V DC) 50 W (at 110 V DC) 80 W 85 W (for 250 V DC) 1500 VA (for 250 V AC) Interrupting rating (ohmic load) max. bridged 240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) 02/11/2020Page2/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Technical data Contact side 2500 VA (for 250 V AC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) Switching capacity 2 A (at 24 V, DC13) 0.2 A (at 110 V, DC13) 0.2 A (at 250 V, DC13) 6 A (at 24 V, AC15) 6 A (at 120 V, AC15) 6 A (at 250 V, AC15) Connection data input side Connection name Coil side Connection method Spring-cage connection Stripping length 8 mm Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Spring-cage connection Stripping length 8 mm Conductor cross section solid 0.14 mm ... 2.5 mm Conductor cross section flexible 0.14 mm ... 2.5 mm Conductor cross section AWG 26 ... 14 General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life 3x 10 cycles Mounting position any Assembly instructions In rows with zero spacing 7 Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC60664 EN50178 Rated surge voltage 6 kV Insulation Safe isolation, reinforced insulation Pollution degree 2 02/11/2020Page3/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Technical data Standards and Regulations Overvoltage category III Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Diagram Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) 02/11/2020Page4/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Diagram Interrupting rating 02/11/2020Page5/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Circuit diagram Articles in set Relay base-PLC-BSP- 24DC/ 1IC/ACT-2912400 14 mm PLC basic terminal block for high switch-on currents with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V DC Single relay-REL-MR- 24DC/1IC-2961341 Pluggable miniature power relay, with power contact for high switch-on currents up to 130A peaks, 1 N/O contact, input voltage: 24VDC 02/11/2020Page6/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 ETIM 7.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 UNSPSC 19.0 39122334 Approvals Approvals Approvals PRS / UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / DNV GL / cULus Recognized / cULus Listed Ex Approvals Approval details PRS http://www.prs.pl/ TE/2109/880590/16 02/11/2020Page7/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Approvals UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 EAC RU CDE.A*30.B.01082 DNV GL https://approvalfinder.dnvgl.com/ TAE0000196-02 cULus Recognized cULus Listed Accessories Accessories Bridge 02/11/2020Page8/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Accessories Continuous plug-in bridge-FBST 500-PLC RD-2966786 Continuous plug-in bridge, length: 500 mm, color: red Continuous plug-in bridge-FBST 500-PLC BU-2966692 Continuous plug-in bridge, length: 500 mm, color: blue Continuous plug-in bridge-FBST 500-PLC GY-2966838 Continuous plug-in bridge, length: 500 mm, color: gray Single plug-in bridge-FBST 6-PLC RD-2966236 Single plug-in bridge, length: 6 mm, number of positions: 2, color: red Single plug-in bridge-FBST 6-PLC BU-2966812 Single plug-in bridge, length: 6 mm, number of positions: 2, color: blue 02/11/2020Page9/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Accessories Single plug-in bridge-FBST 6-PLC GY-2966825 Single plug-in bridge, length: 6 mm, number of positions: 2, color: gray Single plug-in bridge-FBST 8-PLC GY-2967688 Single plug-in bridge, length: 8 mm, number of positions: 2, color: gray Single plug-in bridge-FBST 14-PLC BK-2967691 Single plug-in bridge, length: 14 mm, number of positions: 2, color: black Controller board System connection-PLC-V8L/FLK14/OUT-2299660 V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: positive switching System connection-PLC-V8L/FLK14/OUT/M-2304306 V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: Screw connection 1x, connection 2: IDC/FLK pin strip 1x 14-position, connection 3: Plug connection (Can be snapped onto 8x PLC-INTERFACE terminals), number of channels: 8, control logic: negative switching 02/11/2020Page10/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Accessories DIN rail DIN rail, unperforated-NS 35/ 7,5 V2A UNPERF 2000MM-0801377 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Stainless steel V2A, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/ 7,5 PERF 2000MM-0801733 DIN rail perforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 CU UNPERF 2000MM-0801762 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored DIN rail, unperforated-NS 35/15 UNPERF 2000MM-1201714 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 CU UNPERF 2000MM-1201895 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Copper, uncoated, length:2000 mm, color:copper-colored 02/11/2020Page11/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Accessories DIN rail, unperforated-NS 35/15-2,3 UNPERF 2000MM-1201798 DIN rail, unperforated, Standard profile 2.3mm, width:35 mm, height:15 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/15 AL UNPERF 2000MM-1201756 DIN rail, unperforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Aluminum, uncoated, length:2000 mm, color:silver DIN rail perforated-NS 35/15 PERF 2000MM-1201730 DIN rail perforated, Standard profile, width:35 mm, height:15 mm, similar to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver DIN rail, unperforated-NS 35/ 7,5 UNPERF 2000MM-0801681 DIN rail, unperforated, Standard profile, width:35 mm, height:7.5 mm, acc. to EN 60715, material:Steel, galvanized, passivated with a thick layer, length:2000 mm, color:silver Labeled terminal marker Zack marker strip-ZB10,LGS:FORTL.ZAHLEN-1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 02/11/2020Page12/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Accessories Partition plate Separating plate-PLC-ATP BK-2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Power module Power terminal block-PLC-ESK GY-2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 Screwdriver tools Screwdriver-SZF 1-0,6X3,5-1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip Terminal marking Zack marker strip-ZB10/WH-100:UNBEDRUCKT-5060883 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 1000 02/11/2020Page13/15 https://www.phoenixcontact.com/us/products/2912413 Relay Module-PLC-RSP- 24DC/ 1IC/ACT-2912413 Accessories Zack marker strip-ZB 10:UNBEDRUCKT-1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 Marker for terminal blocks-UC-TM 12-0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks-UCT-TM 12-0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARKNEO, TOPMARK LASER, BLUEMARKIDCOLOR, BLUEMARKID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Spare parts Relay base-PLC-BSP- 24DC/ 1IC/ACT-2912400 14 mm PLC basic terminal block for high switch-on currents with spring-cage connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, with load return line connection (BB), 1 N/O contact, input voltage 24 V DC Single relay-REL-MR- 24DC/1IC-2961341 Pluggable miniature power relay, with power contact for high switch-on currents up to 130A peaks, 1 N/O contact, input voltage: 24VDC 02/11/2020Page14/15 https://www.phoenixcontact.com/us/products/2912413 Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 02/11/2020Page15/15