GaAs-Infrarot-Sendediode GaAs Infrared Emitter Lead (Pb) Free Product - RoHS Compliant IRL 80 A Wesentliche Merkmale Features * GaAs-Lumineszenzdiode im Infrarotbereich * Klares Miniaturkunststoffgehause, seitliche Abstrahlung * Preiswertes Kunststoffgehause * Lange Lebensdauer (Langzeitstabilitat) * Weiter Offnungskegel ( 30) * Passend zu Fototransistor LPT 80 A * * * * * * Anwendungen Applications * Fertigungs- und Kontrollanwendungen der Industrie, die eine Unterbrechung des Lichtstrahls erfordern * Lichtschranken * For a variety of manufacturing and monitoring applications which require beam interruption * Light barriers Typ Type Bestellnummer Ordering Code IRL 80 A Q68000A7851 2007-08-06 1 GaAs infrared emitting diode Clear plastic package with lateral emission Low cost plastic package Long term stability Wide beam ( 30) Matches phototransistor LPT 80 A IRL 80 A Grenzwerte (TA = 25 C Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebs- und Lagertemperatur Operating and storage temperature range Top; Tstg - 40 ... + 100 C Sperrspannung Reverse voltage VR 3 V Durchlassstrom Forward current IF 60 mA Verlustleistung Power dissipation Ptot 100 mW Verringerung der Verlustleistung, TA > 25 C Derate above, TA > 25 C - 1.33 mW/C Warmewiderstand Thermal resistance RthJA 750 K/W Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Wellenlange der Strahlung bei Imax Wavelength of peak emission peak 950 nm Spektrale Bandbreite bei 50% von Imax Spectral bandwidth at 50% of Imax 20 nm Abstrahlwinkel Half angle 30 Grad deg. Durchlassspannung, IF = 20 mA Forward voltage VF 1.5 V Strahlstarke1), IF = 20 mA Radiant intensity Ie 0.4 mW/sr Kennwerte (TA = 25 C) Characteristics 1) Ein Silizium-Empfanger mit 1 cm2 strahlungsempfindlicher Flache wird nach der mechanischen Achse ausgerichtet. Es wird eine Lochblende verwendet. 1) A 1 cm2 silicon detector is aligned with the mechanical axis. An aperture is used. 2007-08-06 2 IRL 80 A Relative Spectral Emission Srel = f () 2007-08-06 Directional Characteristics Irel = f () 3 IRL 80 A Mazeichnung Package Outlines Mae in mm (inch) / Dimensions in mm (inch). Approx weight 0.2g Wellenloten (TTW) TTW Soldering 4.8 (0.189) Empfohlenes Lotpaddesign Recommended Solder Pad 4 (0.157) OHLPY985 Mae in mm (inch) / Dimensions in mm (inch). 2007-08-06 4 IRL 80 A Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 s 250 t Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2007-08-06 5