Web page Sample & buy Tools & software Support & FAQ Document 208-1 SMT Power Inductors - LPO2506 * On-board style - 1.65 mm high * InBoard(R) style - only 1.19 high Designer's Kit C332 contains 3 of all InBoard(R) styles Designer's Kit C333 contains 3 of all On-board styles Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 240 - 260 mg Ambient temperature -40C to +85C with Irms current Maximum part temperature +125C (ambient + temp rise) Storage temperature Component: -40C to +125C Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/13 reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. InBoard style part number1 LPO2506I-472L_ LPO2506I-682L_ LPO2506I-822L_ LPO2506I-103L_ LPO2506I-153L_ LPO2506I-223L_ LPO2506I-333L_ LPO2506I-473L_ LPO2506I-683L_ LPO2506I-104L_ LPO2506I-154L_ LPO2506I-224L_ LPO2506I-334L_ LPO2506I-474L_ LPO2506I-684L_ LPO2506I-105L_ On-board style part number1 LPO2506O-472L_ LPO2506O-682L_ LPO2506O-822L_ LPO2506O-103L_ LPO2506O-153L_ LPO2506O-223L_ LPO2506O-333L_ LPO2506O-473L_ LPO2506O-683L_ LPO2506O-104L_ LPO2506O-154L_ LPO2506O-224L_ LPO2506O-334L_ LPO2506O-474L_ LPO2506O-684L_ LPO2506O-105L_ L 20%2 (H) 4.7 6.8 8.2 10 15 22 33 47 68 100 150 220 330 470 680 1000 1. When ordering, please specify termination and packaging codes: LPO2506O-105LD Termination: L = RoHS compliant silver-palladium-platinum-glass frit Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. DCR max (Ohms) 0.145 0.165 0.200 0.240 0.300 0.420 0.550 0.765 1.10 1.60 2.50 3.65 4.65 6.75 9.15 14.20 SRF typ (MHz) 90 75 65 60 45 35 30 22 20 15 12 10 8.0 6.5 5.5 4.5 Isat3 (A) 1.6 1.3 1.0 1.0 0.90 0.70 0.60 0.50 0.40 0.30 0.25 0.22 0.18 0.14 0.12 0.10 Irms4 (A) 1.9 1.7 1.5 1.5 1.3 1.0 0.90 0.70 0.60 0.50 0.40 0.32 0.28 0.24 0.20 0.16 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. DC current at which the inductance drops 10% (typ) from its value without current. 4. Current that causes a 40C temperature rise from 25C ambient. 5. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 208-1 Revised 06/07/17 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 208-2 SMT Power Inductors - LPO2506 Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 H 100 H 100 10 H 10 1 0.01 0.1 1 10 On-board Style 10 H 1 0.01 0.1 Current (A) 1 XXXY 0.190 4,83 0.190 4,83 0.205 5,21 0.048 1,21 0.285 7,24 0.254 max 6,45 Mounting plane: through board 0.380 max 9,65 0.065 max 1,65 0.061max 1,55 0.360 max 9,14 0.285 max 7,24 Note: Parts manufactured prior to March, 2011 were marked only with the dash number 0.230 5,84 0.254 max 6,45 0.030 0,76 Recommended Land Pattern Dash number 0.205 5,21 InBoard Style 0.310 max 7,87 10 Internal code 0.360 max 9,14 0.285 max 7,24 100 H 100 10 Frequency (MHz) 0.310 max 7,87 1000 H 1000 Inductance (H) Inductance (H) 1000 Recommended Land Pattern 0.048 1,21 0.285 7,24 0.230 5,84 0.284 7,21 hole through board 0.047 max 1,19 0.380 max 9,65 0.030 0,76 US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 208-2 Revised 06/07/17 (c) Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: LPO2506O-223LD LPO2506O-473LB LPO2506I-153LD LPO2506O-472LD LPO2506O-684LB LPO2506O-683LB LPO2506I-474LB LPO2506I-104LD LPO2506I-154LB LPO2506I-822LD LPO2506I-682LD LPO2506I-684LD LPO2506O-104LB LPO2506I-333LD LPO2506O-104LD LPO2506I-104LB LPO2506I-154LD LPO2506I-684LB LPO2506I-103LD LPO2506O-333LB LPO2506I-682LB LPO2506O-333LD LPO2506O-154LB LPO2506I-473LD LPO2506I-683LD LPO2506I-683LB LPO2506O-224LD LPO2506O-684LD LPO2506O-223LB LPO2506I-105LB LPO2506I-334LD LPO2506O-153LD LPO2506I-334LB LPO2506O-103LD LPO2506I-103LB LPO2506O-103LB LPO2506I-223LD LPO2506O-105LD LPO2506I-153LB LPO2506O-334LB LPO2506O-154LD LPO2506I-474LD LPO2506I-472LB LPO2506O-105LB LPO2506O-474LD LPO2506O-153LB LPO2506I-822LB LPO2506O-334LD LPO2506O-683LD LPO2506I-105LD LPO2506O-224LB LPO2506I-472LD LPO2506I-224LB LPO2506O-682LD LPO2506O-472LB LPO2506O-822LD LPO2506O-822LB LPO2506O-682LB LPO2506O-473LD LPO2506O-474LB LPO2506I-223LB LPO2506I-473LB LPO2506I-333LB LPO2506I-224LD