Tyco / Electronics PolySwitch(R) PTC Devices Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PRODUCT: RUEF090 DOCUMENT: SCD 25169 PCN: C15140 REV LETTER: C REV DATE: APRIL 15, 2005 PAGE NO.: 1 OF 1 Overcurrent Protection Device Specification Status: Released Maximum Electrical Rating at 20C 30 VDC /100 A DC 30 VAC /70 ARMS Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 24 AWG Tin Plated Copper Clad Steel Marking: 30 UF090 Raychem Logo and Voltage Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -7.4 -12.2 -(0.29) -(0.48) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.0 (0.12) TABLE II. PERFORMANCE RATINGS: I HOLD AMPS 20C HOLD 0.90 CURRENT RATINGS AMPS AT 20C HOLD TRIP 0.90 1.80 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TIME TO TRIP RESISTANCE ONE-HOUR POST-TRIP RESISTANCE STANDARD TRIP NOMINAL TRIPPED POWER DISSIPATION SECONDS AT 20C, 4.5A MAX 5.9 OHMS AT 20C MIN MAX 0.07 0.12 OHMS AT 20C MAX 0.22 WATTS AT 20C UL, CSA, TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant 0.6 ELV Compliant (c) 2005 Tyco Electronics Corporation. All rights reserved. Pb-Free