0 Spartan-IIE 1.8V FPGA Family: Introduction and Ordering Information R DS077-1 (v1.0) November 15, 2001 0 0 Introduction Preliminary Product Specification * The SpartanTM-IIE 1.8V Field-Programmable Gate Array family gives users high performance, abundant logic resources, and a rich feature set, all at an exceptionally low price. The five-member family offers densities ranging from 50,000 to 300,000 system gates, as shown in Table 1. System performance is supported beyond 200 MHz. Spartan-IIE devices deliver more gates, I/Os, and features per dollar than other FPGAs by combining advanced process technology with a streamlined architecture based on the proven VirtexTM-E platform. Features include block RAM (to 64K bits), distributed RAM (to 98,304 bits), 19 selectable I/O standards, and four DLLs (Delay-Locked Loops). Fast, predictable interconnect means that successive design iterations continue to meet timing requirements. The Spartan-IIE family is a superior alternative to mask-programmed ASICs. The FPGA avoids the initial cost, lengthy development cycles, and inherent risk of conventional ASICs. Also, FPGA programmability permits design upgrades in the field with no hardware replacement necessary (impossible with ASICs). * Features * Second generation ASIC replacement technology - Densities as high as 6,912 logic cells with up to 300,000 system gates - Streamlined features based on Virtex-E architecture - Unlimited in-system reprogrammability - Very low cost * System level features - SelectRAM+TM hierarchical memory: * 16 bits/LUT distributed RAM * Configurable 4K-bit true dual-port block RAM * Fast interfaces to external RAM - Fully 3.3V PCI compliant to 64 bits at 66 MHz and CardBus compliant - Low-power segmented routing architecture - Full readback ability for verification/observability - Dedicated carry logic for high-speed arithmetic - Efficient multiplier support - Cascade chain for wide-input functions - Abundant registers/latches with enable, set, reset - Four dedicated DLLs for advanced clock control - Four primary low-skew global clock distribution nets - IEEE 1149.1 compatible boundary scan logic Versatile I/O and packaging - Low cost packages available in all densities - Family footprint compatibility in common packages - 19 high-performance interface standards, including LVDS and LVPECL - Up to 120 differential I/O pairs that can be input, output, or bidirectional - Zero hold time simplifies system timing Fully supported by powerful Xilinx ISE development system - Fully automatic mapping, placement, and routing - Integrated with design entry and verification tools Table 1: Spartan-IIE FPGA Family Members Device Logic Cells Typical System Gate Range (Logic and RAM) CLB Array (R x C) Total CLBs Maximum Available User I/O Maximum Differential I/O Pairs Distributed RAM Bits Block RAM Bits XC2S50E 1,728 23,000 - 50,000 16 x 24 384 182 84 24,576 32K XC2S100E 2,700 37,000 - 100,000 20 x 30 600 202 86 38,400 40K XC2S150E 3,888 52,000 - 150,000 24 x 36 864 263 114 55,296 48K XC2S200E 5,292 71,000 - 200,000 28 x 42 1,176 289 120 75,264 56K XC2S300E 6,912 93,000 - 300,000 32 x 48 1,536 329 120 98,304 64K (c) 2001 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at http://www.xilinx.com/legal.htm. All other trademarks and registered trademarks are the property of their respective owners. All specifications are subject to change without notice. DS077-1 (v1.0) November 15, 2001 Preliminary Product Specification www.xilinx.com 1-800-255-7778 1 R Spartan-IIE 1.8V FPGA Family: Introduction and Ordering Information General Overview The Spartan-IIE family of FPGAs have a regular, flexible, programmable architecture of Configurable Logic Blocks (CLBs), surrounded by a perimeter of programmable Input/Output Blocks (IOBs). There are four Delay-Locked Loops (DLLs), one at each corner of the die. Two columns of block RAM lie on opposite sides of the die, between the CLBs and the IOB columns. These functional elements are interconnected by a powerful hierarchy of versatile routing channels (see Figure 1). Spartan-IIE FPGAs are customized by loading configuration data into internal static memory cells. Unlimited reprogramming cycles are possible with this approach. Stored values in these cells determine logic functions and interconnections implemented in the FPGA. Configuration data can be read from an external serial PROM (master serial mode), or written into the FPGA in slave serial, slave parallel, or Boundary Scan modes. The Xilinx XC17S00A PROM family is recommended for serial configuration of Spartan-IIE FPGAs. The XC18V00 reprogrammable PROM family is recommended for parallel or serial configuration. Spartan-IIE FPGAs are typically used in high-volume applications where the versatility of a fast programmable solution adds benefits. Spartan-IIE FPGAs are ideal for shortening product development cycles while offering a cost-effective solution for high volume production. Spartan-IIE FPGAs achieve high-performance, low-cost operation through advanced architecture and semiconductor technology. Spartan-IIE devices provide system clock rates beyond 200 MHz. Spartan-IIE FPGAs offer the most cost-effective solution while maintaining leading edge performance. In addition to the conventional benefits of high-volume programmable logic solutions, Spartan-IIE FPGAs also offer on-chip synchronous single-port and dual-port RAM (block and distributed form), DLL clock drivers, programmable set and reset on all flip-flops, fast carry logic, and many other features. Spartan-IIE Family Compared to Spartan-II Family * * * * * * * Higher density and more I/O Higher performance Unique pinouts in cost-effective packages Differential signaling - LVDS, Bus LVDS, LVPECL VCCINT = 1.8V - Lower power - 5V tolerance with 100 external resistor - 3V tolerance directly PCI, LVTTL, and LVCMOS2 input buffers powered by VCCO instead of VCCINT Unique larger bitstream DLL BLOCK RAM BLOCK RAM BLOCK RAM BLOCK RAM DLL DLL DLL I/O LOGIC DS077_01_102201 Figure 1: Basic Spartan-IIE Family FPGA Block Diagram 2 www.xilinx.com 1-800-255-7778 DS077-1 (v1.0) November 15, 2001 Preliminary Product Specification R Spartan-IIE 1.8V FPGA Family: Introduction and Ordering Information Spartan-IIE Product Availability Table 2 shows the package and speed grades available for Spartan-IIE family devices. Table 3 shows the maximum user I/Os available on the device and the number of user I/Os available for each device/package combination. Table 2: Spartan-IIE Package and Speed Grade Availability Pins 144 208 256 456 Type Plastic TQFP Plastic PQFP Fine Pitch BGA Fine Pitch BGA Device Code TQ144 PQ208 FT256 FG456 XC2S50E -6 C, I C, I C, I - -7 (C) (C) (C) - -6 C, I C, I C, I C, I -7 (C) (C) (C) (C) -6 - (C, I) (C, I) (C, I) -7 - (C) (C) (C) -6 - C, I C, I C, I -7 - (C) (C) (C) -6 - C, I C, I C, I -7 - (C) (C) (C) XC2S100E XC2S150E XC2S200E XC2S300E Notes: 1. C = Commercial, TJ = 0 to +85C; I = Industrial, TJ = -40C to +100C 2. Parentheses indicate product not yet released. Contact sales for availability. Table 3: Spartan-IIE User I/O Chart Available User I/O According to Package Type Device Maximum User I/O TQ144 PQ208 FT256 FG456 XC2S50E 182 102 146 182 - XC2S100E 202 102 146 182 202 XC2S150E 263 - 146 182 263 XC2S200E 289 - 146 182 289 XC2S300E 329 - 146 182 329 DS077-1 (v1.0) November 15, 2001 Preliminary Product Specification www.xilinx.com 1-800-255-7778 3 R Spartan-IIE 1.8V FPGA Family: Introduction and Ordering Information Ordering Information Example: XC2S50E -6 PQ 208 C Device Type Temperature Range Number of Pins Speed Grade Package Type Device Ordering Options Device Speed Grade Package Type / Number of Pins XC2S50E -6 Standard Performance TQ144 144-pin Plastic Thin QFP XC2S100E -7 Higher Performance PQ208 208-pin Plastic QFP XC2S150E FT256 256-ball Fine Pitch BGA XC2S200E FG456 456-ball Fine Pitch BGA Temperature Range (TJ ) C = Commercial I = Industrial 0C to +85C -40C to +100C XC2S300E Revision History Version No. Date 1.0 11/15/01 Description Initial Xilinx release. The Spartan-IIE Family Data Sheet DS077-1, Spartan-IIE 1.8V FPGA Family: Introduction and Ordering Information (Module 1) DS077-2, Spartan-IIE 1.8V FPGA Family: Functional Description (Module 2) DS077-3, Spartan-IIE 1.8V FPGA Family: DC and Switching Characteristics (Module 3) DS077-4, Spartan-IIE 1.8V FPGA Family: Pinout Tables (Module 4) 4 www.xilinx.com 1-800-255-7778 DS077-1 (v1.0) November 15, 2001 Preliminary Product Specification