SPECIFICATION CONTROL DRAWING
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A. Raychem
TITLE:
SOLDERSLEEVE ONE STEP SHIELD
TERMINATOR, LEAD-FREE
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets] DOCUMENT NO.: B-155-38XX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
PROD. REV.:
SEE TABLE DOC. ISSUE:
1 DATE:
30-Jun-05
PREPARED BY:
mforonda DCR NUMBER:
D050171 REPLACES:
--- CAGE CODE :
06090 SCALE:
--- SIZE:
A SHEET:
1 of 1
© 2005 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Revisions Product Dimensions Cable Dimensions
Product
Name L
max øA
min B
max øC
min øD
min
Qty:
Item 2
B-155-3801 A 1.7 [0.065] 1.7 [[0.065] 0.9 [0.035] 0.4 [0.015] 1
B-155-3802 A
26.0 [1.025) 1.95 [0.075] 1.95 [0.075] 1.1 [0.045] 0.6 [0.025] 2
B-155-3803 A 2.7 [0.105] 2.7 [0.105] 1.8 [0.070] 1.3 [0.050] 1
B-155-3805 A 4.5 [0.180] 4.5 [0.180] 2.3 [0.090] 1.8 [0.070] 1
B-155-3806 A 6.0 [0.235] 6.0 [0.235] 3.3 [0.130] 2.8 [0.110] 1
B-155-3807 A 7.0 [0.275] 7.0 [0.275] 3.7 [0.145] 3.2 [0.125] 1
B-155-3809 A 8.7 [0.340] 8.7 [0.340] 4.2 [0.165] 3.7 [0.145] 2
B-155-3810 A 9.7 [0.382] 9.7 [0.382] 6.8 [0.268] 6.0 [0.236] 2
B-155-3811 A 10.7 [0.420] 10.7 [0.420] 7.1 [0.280] 6.6 [0.260] 2
B-155-3813 A
42.0 [1.655]
13.0 [0.510] 13.0 [0.510] 8.9 [0.350] 8.4 [0.330] 1
MATERIAL
1. INSULATION SLEEVE: Heat-shrinkable, transparent clear, radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX: Qty: see table (one solder washer shown).
SOLDER: TYPE Sn42Bi58 per ANSI / J-STD-006.
FLUX: TYPE ROM1 per ANSI / J-STD-004.
3. MELTABLE RING: Thermally stabilized thermoplastic. Color: clear.
4. MELTABLE RING: Thermally stabilized thermoplastic. Color: blue.
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable, having an
insulation rated for at least +85°C minimum.
2. Temperature range: -55°C to +125°C.
3. When installed properly, it will meet the performance requirements of Tyco Electronics / Raychem Specification RT-1404.
4. For installation procedure and application equipment consult RPIP-824-00 or H54286.
For best results, prepare
the cable as shown:
