TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
RF01010 Rev A, June 2010 High Reliability Product Group Page 1 of 4
DEVICES M5KP5.0A thru M5KP110CA, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Suppresses transients up to 5000 watts @10/1000 µs and 34000 watts @ 8/20 µs (see Figure 1)
Optional upscreening available by replacing M prefix with MA, MX or MXL prefixes. These prefixes specify
various screening and conformance inspection options based on MIL-PRF-19500. Refer to MicroNote 129
for more details on the screening options.
Metal hermetically sealed DO-13 axial-leaded equivalents available in the LC6.5A - LC170A series in
separate data sheet
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
3σ lot norm screening performed on Standby Current ID
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Fast response
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance:
Class 1,2,3,4: M5KP5.0A to M5KP110CA
Class 5: M5KP5.0A to M5KP110CA (short distance)
Class 5: M5KP5.0A to M5KP36CA (long distance)
Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance:
o Class 1 & 2: M5KP5.0A to M5KP110CA
o Class 3: M5KP5.0A to M5KP78CA
o Class 4: M5KP5.0A to M5KP40CA
Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance:
Class 2: M5KP5.0A to M5KP70CA
Class 3: M5KP5.0 to M5KP36CA
Class 4: M5KP5.0 to M5KP18CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 ºC: 5000 watts at 10/1000 μs (also see Figures 1 and 2) with impulse
repetition rate (duty factor) of 0.05 % or less
tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65 ºC to +150 ºC
Thermal resistance: 20ºC/W junction to lead, or 80ºC/W junction to ambient when mounted on FR4 PC
board with 4 mm2 copper pads (1oz) and track width 1 mm, length 25 mm
Steady-State Power dissipation: 6 watts at TL = 30 ºC, or 1.56 watts at TA = 25 ºC when mounted on FR4
PC board described for thermal resistance
Forward Surge Voltage: 3.5 V maximum @ 100 Amps 8.3 ms half-sine wave (unidirectional devices only)
Solder temperatures: 260 ºC for 10 s (maximum)
5000W Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Plastic encapsulated TVS series for Thru Hole mounting
- Selections for 5.0 to 110 V standoff voltages (VWM)
CASE 5A
(DO-204AR)
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01010 Rev A, June 2010 High Reliability Product Group Page 2 of 4
MECHANICAL AND PACKAGING
Void-free transfer molded thermosetting epoxy body meeting UL94V-0
Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
Body marked with part number
Cathode indicated by band. No cathode band on bi-directional devices.
Available in Bulk or custom tape-and-reel packaging
TAPE-AND-REEL standard per EIA-296 for axial package (add “TR” suffix to part number)
Weight: 1.4 gram (approximately)
PACKAGE DIMENSIONS
CASE 5A
Dimensions in inches
SYMBOLS & DEFINITIONS
Symbol
Definition
Symbol
Definition
VWM
Working Peak (Standoff) Voltage
IPP
Peak Pulse Current
PPP
Peak Pulse Power
VC
Clamping Voltage
VBR
Breakdown Voltage
IBR
Breakdown Current for VBR
ID
Standby Current
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01010 Rev A, June 2010 High Reliability Product Group Page 3 of 4
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI
PART NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
BREAKDOWN
VOLTAGE
VBR @ IBR
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
MAXIMUM
STANDBY
CURRENT
ID @ VWM
MAXIMUM
PEAK PULSE
CURRENT
IPP (FIG. 2)
MAXIMUM
TEMPERATURE
COEFFICIENT OF VBR
αV(BR)
V
V mA
V
A
A
mV/ ºC
M5KP5.0A
M5KP6.0A
5.0
6.0
6.40 – 7.00
6.67 – 7.37
50
50
9.2
10.3
2000*
5000
543
485
4.0
4.0
M5KP6.5A
M5KP7.0A
6.5
7.0
7.22 – 7.98
7.78 – 8.60
50
50
11.2
12.0
2000
1000
447
417
4.0
5.0
M5KP7.5A
M5KP8.0A
7.5
8.0
8.33 – 9.21
8.89 – 9.83
5
5
12.9
13.6
250
150
388
367
6.0
6.0
M5KP8.5A
M5KP9.0A
8.5
9.0
9.44 – 10.4
10.0 – 11.1
5
5
14.4
15.4
50
20
347
325
7.0
8.0
M5KP10A
M5KP11A
10
11
11.1 – 12.3
12.2 – 13.5
5
5
17.0
18.2
15
10
294
274
9.0
10
M5KP12A
M5KP13A
12
13
13.3 – 14.7
14.4 – 15.9
5
5
19.9
21.5
10
10
251
232
11
12
M5KP14A
M5KP15A
14
15
15.6 – 17.2
16.7 – 18.5
5
5
23.2
24.4
10
10
215
206
13
15
M5KP16A
M5KP17A
16
17
17.8 – 19.7
18.9 – 20.9
5
5
26.0
27.6
10
10
192
181
16
18
M5KP18A
M5KP20A
18
20
20.0 – 22.1
22.2 – 24.5
5
5
29.2
32.4
10
10
172
154
19
22
M5KP22A
M5KP24A
22
24
24.4 – 26.9
26.7 – 29.5
5
5
35.5
38.9
10
10
141
128
24
27
M5KP26A
M5KP28A
26
28
28.9 – 31.9
31.1 – 34.4
5
5
42.1
45.5
10
10
119
110
29
30
M5KP30A
M5KP33A
30
33
33.3 – 36.8
36.7 – 40.6
5
5
48.4
53.3
10
10
103
94
35
38
M5KP36A
M5KP40A
36
40
40.0 – 44.2
44.4 – 49.1
5
5
58.1
64.5
10
10
86
78
40
45
M5KP43A
M5KP45A
43
45
47.8 – 52.8
50.0 – 55.3
5
5
69.4
72.7
10
10
72
69
49
51
M5KP48A
M5KP51A
48
51
53.3 – 58.9
56.7 – 62.7
5
5
77.4
82.4
10
10
65
61
55
60
M5KP54A
M5KP58A
54
58
60.0 – 66.3
64.4 – 71.2
5
5
87.1
93.6
10
10
57
53
64
69
M5KP60A
M5KP64A
60
64
66.7 – 73.7
71.1 – 78.6
5
5
96.8
103.0
10
10
52
49
70
75
M5KP70A
M5KP75A
70
75
77.8 – 86.0
83.3 – 92.1
5
5
113
121
10
10
44
41
84
90
M5KP78A
M5KP85A
78
85
86.7 – 95.8
94.4 – 104.0
5
5
126
137
10
10
40
36
94
102
M5KP90A
M5KP100A
90
100
100 – 111
111 – 123
5
5
146
162
10
10
34
31
109
122
M5KP110A
110
122 - 135
5
177
10
28
132
NOTE 1:
Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM which should be equal to or
greater than the dc or continuous peak operating voltage level
NOTE 2:
For bidirectional construction, indicate a CA suffix after the part number
* For the 5KP5.0CA double the ID Maximum Standby Current to 4000 µA
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01010 Rev A, June 2010 High Reliability Product Group Page 4 of 4
GRAPHS
tp – Pulse Time – sec
FIGURE 1 - Peak Pulse Power vs. Pulse Time to 50% of Exponentially Decaying Pulse
Test waveform parameters: tr=10 s, tp=1000 s V(BR) Breakdown Voltage - Volts
FIGURE 2 - Pulse Waveform FIGURE 3 Typical Capacitance vs Breakdown Voltage
PPP Peak Pulse Power - kW
C – Capacitance – pico farads
