PSU-Series FEATURES ' . G!I'ISI'B( - "nv ..... Q I _%L-fgi ' -r f . Voltage Rating: 6V/12.5V/20V/40V/60V 0 Output Power Rating: 1200\lI/ ~ 1520W -<7 o C.V/C.C Priority; Particularly Suitable for the Battery and LED Industry . Adjustable Slew Rate o Series and Parallel Operation (2 Units in Series/4 Units in Parallel Maximum) . High Efficiency and High Power Density `(E Iuss IGPIB lgjjlff, ILAN lias-232 IRS-485 o 19" Rack Mount Size Design v Standard Interface : LAN, RS-232 & The PSU-Series is a single output programmable switching DC Power Supply covering a power range up to I520W. This series of products include five models with the combination from 6V to 60V rated voltages. As the PSU-Series can be connected in series for maximum 2 units or in parallel for maximum 4 units, the capability of connecting multiple PSUSeries units for higher voltage or higher current output provides a broad coverage of applications. at the C.V and C.C crossover point may possibly damage the DUT. At the power output on stage, the PSU-Series is able to run under C.C priority to limit the current spike occurred at the threshold voltage RS485, USB (Device/Host), Analog Control Interface o Optional Interface : GPIB/Analog Control Interface (Isolated Voltage Control) /Analog Control Interface (Isolated Current Control) and therefore protects DUT from the inrush current damage. The OVP and OCP protections can prevent the DUT damage. Both OVP and OCP levels can be selected the range of :,'_E',P' N .7-_ = ..;__ 10% to 110% , with the default level set The C.V/C.C priority selection ofthe PSUSeries is a very useful feature for DUT protection. The conventional power supply normally operates under C.V mode when the power supply output is turned on. This could bring a high inrush current to the capacitive load or current-intensive load at the power output on stage. Though the current becomes stable after the C.C mode is activated, the current spike occurred -i 'i -ii ;;;"5 "" ,. _..- . .. .. i at 110%, ofthe rated voltage/current of -- 1"' = i i = i Front the power supply. The PSU-Series provides USB Host/ Device, LAN, RS-232 with RS485and Analog Control interfaces as standard. The LabView driver and the data lEE**l JEE_Er* * -.-wit T i-5:3, ".255.-Ea -' * E A t I ll` Rear pa,-|e| Logging PC software are available at the rear panel for external control ofthe power On/Off and the external monitoring of power output voltage and cu rrent. APPLICATIONS - Laboratories and Educational Facilities Series Operation Model Psu 5-100 Single Unit Two Units Parallel Operation Model o Product Testing and Quality Assurance Single Unit Two Units Three Units Four Units av / 200A i2v / 200A PSU 6-ZOO P$U12_5-`I20 I2.5V/ 'l2OA 25V/ IZOA psu 115.120 I2.5V/120A I2.5V/240A I2.5V/360A I2.5V/480A PSU 20-76 20V / 76A 40V / 76A psu 10.75 20v /76A 20V/152A 20V/223A 20v / 304A PSU 40.33 40V / 38 A 80V / 38A PSU 40.33 40V / 38 A 40V / 76A 4OV/ 'lI4A 40v / 152A PSU 60-Z5 60V / 25A 'l2OV / 25A PSU 60-25 60V f 25A 60V f SOA 60V / 75A sov / "IOOA 6V / 200A 6V / 400A 6V / 600A av / 800A o Service Operation and Post-Sales support o Product Development and Debugging G`! |l'|5|'EK Simply Reliable SPECIFICATIONS Model PSU 6-200 PSU 20-76 PSU 12.5-120 PSU 40-38 PSU 60-25 OUTPUT RATINGS Voltage Current Power OUTPUT RIPPLE AND NOISE 0 ~ 6V 0 - 200A 1200W cv p-p (10--20M Hz) 60mV CV rms 5Hz-1 MHz CC rms 5Hz-1 MHz LOAD IlEGULATIOllI Voltage Current 0-12.5V 0~ 120A 1500W 0 ~ 20V 0 -- 76A 1520W 0~ 40V 0 - 38A 1520W 0 ~ 60V 0 - 25A 1500W 8mV 400mA 60mV 8mV 240mA 60mV 8mV 152mA 60mV 8mV 95 mA 60mV 8mV 75 mA 2.6mV 45ml-\ 3.25 mV 29mA 4mV 20.2mA 6mV 12.6mA 8mV 10mA 2.6mV ZZITIA 3.25mV 14mA 4mV 9.6mA 6mV 5.8mA 8mV 4.5mA 3mV 200mA 6.25 mV 120mA 10mV 76mA 20mV 38mA 30mV 25 mA 12.5mV 240mA 20mV 152mA 40mV 76mA 60mV 50mA Ims Ims Ims LINE REGULATION (change from 85 to132 VAC inputor 170-265 VAC) Voltage Current PROGRAMMING ACCURACY Voltage 0.05% + (mV) Current 0.2% + (mA) 0 MEASUREMENT ACCURACY I Voltage 0.1% + m 6mV Current 0.2% + mA 400mA LOAD TRANSIENT RECOVERY TIM E Time 1.51115 Ims OUTPUT RESPONSE TIME Rise Time (No Load 8:. Full Load) 80ms 80ms 700ms 50ms 80ms 800ms 50ms 80ms 1000ms 80ms 80ms 1100ms 80ms 0.4mV 4mA 0.7mV 2.5mA 1.3mV 1.2mA 2mV 0.8mA Fall Time No Load) 500ms Fall Time Full Loa ) I0ms PROGRAM MING/M EASU REM ENT RESOLUTION Voltage 0-2mV Current 5mA TEMPERATURE COEFFIClENT(after a 30 minute ' warm-up) 100PPM/"C after 30 minutes warm up Voltage 100PPM/"C after 30 minutes warm up Current SERIES AND PARALLEL OPERATION Parallel Operation Series Operation ENVIRONMENTAL CONDITIONS Environment Operating Temperature Range Storage Temperature Range Operating Humidity Range Storage Humidity Range Up to 4 units including master unit Up to 2 units including master unit Indoor use, installation cateorgy 11 (AC Input), pollution degree 2 0C ~50C -25C ~ 70C 20% to 85% RH Up to 90% or less relative humidity (no condensation) AC INPUT Norminal Input Input Range P ower Fact or ( 100Vac] 200Vac ) Maximum Input Current (100Vac/200Vac) inrush Current EfIiciency(100Vac/200Vac) DIMENSIONS & WEIGHT Analog Control (Non-Isolated) PC Remote Interface (Standard) PC Remote Interface (Optional) Cooling Fan Dimensions & Weight 100Vac ~ 240Vac, 50Hz ~ 60Hz, single phase a5vA ~ 265Vac 0.99/0.93 21A/11A 50A 77%/79% l 22%/85% l 23%/26% l s4%/27% l 24%/87% YES use (Device/Host)/RS-232 with RS-485/LAN GPIB/Analog Control Interface (Isolated Voltage Control)/Analog Control Interface (Isolated Current Control); Note : Selection one ofthree Forced air cooling by Internal fan 423(W) x 43.6(H) x 447.2(D) ;Approach 8.7kg Specifications subject to change without notice. SU-Serie5GD2DH ORDERING INFORMATION PSU PSU PSU PSU PSU 5.200 12,5420 20-76 40-38 60-25 1200W 1500W 1520W 1520W ISOOW Programmable Programmable Programmable Programmable Programmable Switching Switching Switching Switching Switching DC DC DC DC DC Power Power Power Power Power Supply Supply Supply Supply Supply ACCESSORIES User Manual x 1, Basic Accessories Kitx1 FREE DOWNLOAD Driver LabView Driver Global Headquarters GTL-243 GPIB Cable (2m) GT L-246 USB Cable, USB 2.0A-B TYPE CABLE, 4P GTL-251 PSU-01 B PSU-01C PSU-02B PSU-02C PSU-03B PSU-03C P$U.435 ' DB9 connector kit' RS 232 Cable with RS 485 Cable with DB9 connector kit GPIB-USB-HS (high speed) Bus bar for 2 units in parallel connection Cable for 2 units in parallel connection Bus bar for3 units in parallel connection GRM-001 PSU-GPIB P5U-|5Q-| P$U-|5Q-V Slide bracket 2pcs/set ,PSU option GPIB Interface card (factory option) Isolate current remote control card (factory option) Isolate voltage remote control card (factory option) Cable for3 units in parallel connection Bus bar for 4 units in parallel connection GPW-001 GPW-002 UL/CSA power cord 3m ,PSU option VDE power cord 3m ,PSU option Cable for 4 units in parallel connection GP"/.003 PSE power cord 3m ,PSU option U.S.A. Subsidiary GOOD WILL INSTRUMENT GO., LTD. INSTEK AMERICA CORP. No.7-1, jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan T +335-2-2263-0389 F +836-2-2263-0639 5198 Brooks Street Montclair, CA 91763, U.S.A. E-mail: marketing@gOOdwill.cOm.tw China Subsidiary GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. NO. 521, Zhujiang Road, Srid, Suzhou jiangsu 215011 China T +85-512-6661-7177 F +85-512-6661-7277 E-mail: marketing@iristek.com.cn Malaysia Subsidiary GOOD WILL INSTRUMENT (M) SDN. BHD. T +1 -909-399-3535 F +1 -909-399-O31 9 E-mail: saIes@instekamerica.com japan Subsidiary TEXIO TECH NOLOCY CORPORATION. 7F Towa Fudosan Shin Yokohama Bldg., 2-18-13 Shin Yokohama, Kohoku-ku, Yokohama, Kanagawa, Europe Subsidiary GOOD WILL INSTRUMENT EURO B.V. De Run 5427A, 550400 Veldhoven, THE NETHERLANDS T +31(0)40-2557790 F +31 (0)40-2541194 GE lI'l5l'EI( Simply Reliable 222-0033 japan T +31-45-620-2305 F +81-45-534-7181 E-mail: inf0@texio.co.jp 27, Persiaran Mairisuri1/1,Sunway Tunas, 11900 Bayan Lepas, Penang, Malaysia T +604-6309988 F +604-6309989 E-mail: sales@gOodwill.cOm.my Psu . 232 Korea Subsidiary GOOD WILL INSTRUMENT KOREA CO., LTD. #1406, Ace Hightech--City B/D 1Dong, Mullae-Dong 3Ga 55-20, Yeongduengpo-Cu, Seoul, Korea T +82-2-3439-2205 F +82-2-343 9-2207 E-mail : gWinstek@gWinstek.co.l