02/11/2015 www.crouzet.com 80 and 100 W - 120 Nm - Planetary O 81 mm 801897 TNi20 - 0/10 V Part number Contact us With or without integrated control electronics Output in motor shaft Ideal for high reduction ratios Ideal for high-torque applications Excellent efficiency Reversible movement Part numbers Type 80189706 With built-in electronic control 801897 TNi20 - 0/10 TNi20 V Without built-in control, with Hall effect sensors Ratios (i) Output speed (rpm) 24 V DC Available torque (Nm) - 139 - 3 stages 23 23 Specifications General characteristics Motor Nominal motor power at 24 V (W) Speed control Axial load dynamic (N) Radial load dynamic (N) Efficiency (%) Gearbox case temperature rise (C) Weight (g) Protection index 801800 80 0-10 V 400 / *600 / **1000 50 / *70 / **120 90 / *80 / **70 35 2900 / *3600 / **4200 IP54 Comments Dimensions (mm) 801897 with built-in TNi20 No Legend 4 holes M6 x 12 over O 65 Fixing hole M6 x 16 Length of cable 500 15 mm Parallel key (6 x 6 x 28 conforming to DIN 6885 A) L2 1 stage : 182 mm max. L2 2 stages : 203.9 mm max. L2 3 stages : 226 mm max. Precautions for use The limits and precautions for use described in the 80 W brushless motor section must be observed. Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected 02/11/2015 Product adaptations Modification of software for other speed, torque and speed controller settings, position holding, emergency stop via short-circuit Dimensions of gearbox shaft Cable length, with or without connector Other windings Low-noise gearbox version Other reduction ratios Mechanical holding brake Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected www.crouzet.com