Fiber Optic Products Catalog Table of Contents Attenuators, WDM's, and Switches Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-184 Singlemode Build Out Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-182 In Line Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183, 184 Lensed Wavelength Division Multiplexer & Demultiplexer (LWDM) Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185, 186 Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187-194 Ruggedized Multimode Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187 Multimode 1x2 SPDT Switch, Dual 1x2 DPDT Switch, 2x2 Bypass Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188-190 Multimode Bypass Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191-194 Attenuators, WDMs, and Switches 5 177 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators Singlemode Build Out Attenuators Product Facts A range of fixed attenuation values. Standard values of 1 through 20 and 25 dB UPC and APC offer Excellent Return Loss LC, SC, FC, ST, and D4 styles Attenuation is wavelength independent and polarization insensitive Low PDL Low modal noise High reliability Very low reflectance Vibration resistant Dual Window and Broadband Bandpass End face geometry per GR-326 Designed to comply with Telcordia GR-910 Tyco Electronics high performance Build Out Attenuators utilize a unique all-fiber construction to absorb the optical signal. By employing a Tyco Electronics' technology, the design minimizes reflectance, attenuation tolerance, and PDL while maximizing reliability, environmental stability, and power handling. There are no filters, air gaps, or core mismatches. Applications Power leveling in DWDM transmission systems Customizable Features Attenuation tolerance Test and Measurement Power attenuation at the receiver Attenuation values in 1 dB increments Labeling Kitting/Packaging Wavelength Dependent Loss Reflectance: Available Collateral Test reports qualifying product to Telcordia GR-910 (2004) Application Specification 114-1129 Installation/Cleaning Instruction Sheet 408-8895 Product Specification 108-2099 Specifications Attenuation Values -- 1-20 dB and 25 dB (Fixed) Reflectance -- -55 and -65 dB for UPC and APC polish, respectively Operating Temperature -- -40C to +75C Vibration Resistance -- < 0.1 x attenuation UPC to -55 dB max. APC to -65 dB max. http://www.tycoelectronics.com/ documents Customer Drawings 178 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators (Continued) Singlemode LC Attenuators, Build Out Style, Fixed Value Broadband Bandpass Attenuators Operating Wavelength 1260-1360 nm & 1430-1625 nm LC/UPC Note: Additional attenuation values available upon request. Part Number 1693560-1 1693560-2 1693560-3 1693560-4 1693560-5 1693560-6 1693560-7 1693560-8 1693560-9 1-1693560-0 1-1693560-1 1-1693560-2 1-1693560-3 1-1693560-4 1-1693560-5 1-1693560-6 1-1693560-7 1-1693560-8 1-1693560-9 2-1693560-0 2-1693560-5 Attenuators, WDMs, and Switches Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -55 dB Note: All part numbers are RoHS compliant. 5 179 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators (Continued) Singlemode SC Attenuators, Build Out Style, Fixed Value SC/UPC Note: Additional attenuation values available upon request. Singlemode SC Attenuators, Build Out Style Fixed Value SC/APC 8 Note: Additional attenuation values available upon request. * 9 APC Available (Part Number 5417496-X) Dual Window Attenuators Operating Wavelength 1310/1550 nm 25 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 5209943-1 5209943-2 5209943-3 5209943-4 5209943-5 5209943-6 5209943-7 5209943-8 5209943-9 1-5209943-0 1-5209943-1 1-5209943-2 1-5209943-3 1-5209943-4 1-5209943-5 1-5209943-6 1-5209943-7 1-5209943-8 1-5209943-9 2-5209943-0 2-5209943-5 Broadband Bandpass Attenuators Operating Wavelength 1260-1360 nm & 1430-1625 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 5209250-1 5209250-2 5209250-3 5209250-4 5209250-5 5209250-6 5209250-7 5209250-8 5209250-9 1-5209250-0 1-5209250-1 1-5209250-2 1-5209250-3 1-5209250-4 1-5209250-5 1-5209250-6 1-5209250-7 1-5209250-8 1-5209250-9 2-5209250-0 2-5209250-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB 0 dB: 0.50 dB max Reflectance -55 dB Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB 0 dB: 0.50 dB max. Reflectance -55 dB Dual Window Attenuators Operating Wavelength 1310/1550 nm 25 nm Broadband Bandpass Attenuators Operating Wavelength 1260-1360 nm & 1430-1625 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 20 25 Part Number 5209597-1 5209597-2 5209597-3 5209597-4 5209597-5 5209597-6 5209597-7 5209597-8 5209597-9 1-5209597-0 1-5209597-1 1-5209597-2 1-5209597-3 1-5209597-4 1-5209597-5 1-5209597-6 1-5209597-7 1-5209597-8 2-5209597-0 2-5209597-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -60 dB Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 5417021-1 5417021-2 5417021-3 5417021-4 5417021-5 5417021-6 5417021-7 5417021-8 5417021-9 1-5417021-0 1-5417021-1 1-5417021-2 1-5417021-3 1-5417021-4 1-5417021-5 1-5417021-6 1-5417021-7 1-5417021-8 1-5417021-9 2-5417021-0 2-5417021-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -65 dB Note: All part numbers are RoHS compliant. 180 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators (Continued) Singlemode FC Attenuators, Build Out Style, Fixed Value FC/UPC Note: Additional attenuation values available upon request. Dual Window Attenuators Operating Wavelength 1310/1550 nm 25 nm Part Number 5209948-1 5209948-2 5209948-3 5209948-4 5209948-5 5209948-6 5209948-7 5209948-8 5209948-9 1-5209948-0 1-5209948-1 1-5209948-2 1-5209948-3 1-5209948-4 1-5209948-5 1-5209948-6 1-5209948-7 1-5209948-8 1-5209948-9 2-5209948-0 2-5209948-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -55 dB Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 5209285-1 5209285-2 5209285-3 5209285-4 5209285-5 5209285-6 5209285-7 5209285-8 5209285-9 1-5209285-0 1-5209285-1 1-5209285-2 1-5209285-3 1-5209285-4 1-5209285-5 1-5209285-6 1-5209285-7 1-5209285-8 1-5209285-9 2-5209285-0 2-5209285-5 Attenuators, WDMs, and Switches Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Broadband Bandpass Attenuators Operating Wavelength 1260-1360 nm & 1430-1625 nm Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB 0 dB: 0.50 dB max. Reflectance -55 dB Dual Window Attenuators Operating Wavelength 1310/1550 nm 25 nm Singlemode FC Attenuators, Build Out Style, Fixed Value Attenuation (dB) Part Number 1 1754722-1 2 1754722-2 3 1754722-3 4 1754722-4 5 1754722-5 6 1754722-6 10 1-1754722-0 12 1-1754722-2 15 1-1754722-5 18 1-1754722-8 20 2-1754722-0 25 2-1754722-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -65 dB FC/APC (8) 5 Note: Additional attenuation values available upon request. Note: All part numbers are RoHS compliant. 181 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators (Continued) Singlemode ST Attenuators, Build Out Style, Fixed Value Dual Window Attenuators Operating Wavelength 1310/1550 nm 25 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 ST/UPC Part Number 5417549-1 5417549-2 5417549-3 5417549-4 5417549-5 5417549-6 5417549-7 5417549-8 5417549-9 1-5417549-0 1-5417549-1 1-5417549-2 1-5417549-3 1-5417549-4 1-5417549-5 1-5417549-6 1-5417549-7 1-5417549-8 1-5417549-9 2-5417549-0 2-5417549-5 Note: Attenuation Tolerance, Ambient 5 dB: .15 x nominal attenuation value < 5 dB: 0.75 dB Reflectance -55 dB Broadband Bandpass Attenuators Operating Wavelength 1260-1360 nm & 1430-1625 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 5417399-1 5417399-2 5417399-3 5417399-4 5417399-5 5417399-6 5417399-7 5417399-8 5417399-9 1-5417399-0 1-5417399-1 1-5417399-2 1-5417399-3 1-5417399-4 1-5417399-5 1-5417399-6 1-5417399-7 1-5417399-8 1-5417399-9 2-5417399-0 2-5417399-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB 0 dB: 0.50 dB max. Reflectance -55 dB Singlemode D4 Attenuators, Build Out Style, Fixed Value Dual Window Attenuators D4/PC Operating Wavelength 1310/1550 nm 25 nm Attenuation (dB) 5 10 15 20 Part Number 5209570-5 1-5209570-0 1-5209570-5 2-5209570-0 Note: Attenuation Tolerance, Ambient 5 dB: .15 x nominal attenuation value < 5 dB: 0.75 dB Reflectance -45 dB Note: Additional attenuation values available upon request. Note: All part numbers are RoHS compliant. 182 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators (Continued) In Line Attenuators Product Facts A range of fixed attenuation values. Standard values of 1 through 20, and 25 dB UPC offers Excellent Return Loss Attenuation is wavelength independent and polarization insensitive Low PDL Low modal noise High reliability -60 dB Reflectance (unconnectorized) Low cost Vibration resistant Single and Dual Window Designed to comply with Telcordia GR-910 Specifications Applications Power leveling in DWDM transmission systems Test and Measurement Power attenuation at the receiver Available Collateral Product Specification 108-2103 Heavy Duty 3 mm cable 108-2130 Medium Duty 900 m cable Customer Drawings Attenuation Values -- 1-20 dB and 25 dB (Fixed) Reflectance -- -55 and -60 dB for UPC and unterminated respectively Operating Temperature -- -40C to +75C Vibration Resistance -- < 0.1 x attenuation Tyco Electronics' high performance In Line Attenuators utilize a unique all fiber construction to absorb the optical signal. By employing a Tyco Electronics' technology, Attenuators, WDMs, and Switches the design minimizes reflectance, attenuation tolerance, and PDL while maximizing reliability, environmental stability, and power handling. There are no filters, air gaps, or core mismatches. 5 Customizable Features Lead lengths Connectorized types, including SC, FC, ST, & LC LC available in Medium Duty (900 m cable) only Available in Heavy Duty (3 mm cable) and Medium Duty (900 m cable) 183 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Attenuators (Continued) Singlemode In Line Attenuators, Heavy Duty (3 mm cable), Fixed Value SC - SC Dual Window In Line Attenuators Operating Wavelength 1310/1550 nm 25 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 6588517-1 6588517-2 6588517-3 6588517-4 6588517-5 6588517-6 6588517-7 6588517-8 6588517-9 1-6588517-0 1-6588517-1 1-6588517-2 1-6588517-3 1-6588517-4 1-6588517-5 1-6588517-6 1-6588517-7 1-6588517-8 1-6588517-9 2-6588517-0 2-6588517-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -55 dB Singlemode In Line Attenuators, Medium Duty (900 m cable), Fixed Value LC to LC Dual Window In Line Attenuators Operating Wavelength 1310/1550 nm 25 nm Attenuation (dB) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 25 Part Number 6588564-1 6588564-2 6588564-3 6588564-4 6588564-5 6588564-6 6588564-7 6588564-8 6588564-9 1-6588564-0 1-6588564-1 1-6588564-2 1-6588564-3 1-6588564-4 1-6588564-5 1-6588564-6 1-6588564-7 1-6588564-8 1-6588564-9 2-6588564-0 2-6588564-5 Note: Attenuation Tolerance, Ambient 5 dB: .10 x nominal attenuation value < 5 dB: 0.50 dB Reflectance -50 dB Note: All part numbers are RoHS compliant. 184 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Lensed Wavelength Division Multiplexer and Demultiplexer (LWDM) Products Singlemode and Multimode Lensed WDM's Features High isolation Wide bandpass Excellent reflectance Small footprint Applications Two-way, single-fiber video links Instrumentation Available Collateral Customer Drawings Lead Lengths Connector Type Labels Optical Specifications Tyco Electronics' Multiplexers allow use of a single fiber for simultaneous transmission of two signals of different wavelengths. Tyco Electronics' Demultiplexers separate the combined wavelengths from the single fiber into individual fibers. The universal MUX/DEMUX's are available for multimode as well as singlemode applications. Through the use of highquality dichroic coatings, which act as bandpass filters, numerous wavelength combinations from 800-1600 nm can be accommodated. Unlike the narrow bandpass of fused multiplexers, the minimum bandpass of these devices around the central wavelength is 50 nm. This feature makes these multiplexers ideal for use in broadband communication applications. These devices are unique in that their optical performance is independent of polarization effects of the light source. The 11.9 mm [7/16 inch] thick encapsulated devices with monolithic lens structures tolerate vibration and shock; their low profile permits easy printed circuit board mounting. Specifications -- Multimode Specifications -- Singlemode Temperature Insertion Loss (per FOTP-180) -- Insertion Loss (per FOTP-180) -- Maximum Without connectors 1.3 dB With 2 connectors 2.3 dB Change in Transmission over operating temperatures +/- 0.5 dB Directivity -- Minimum: >55 dB Wavelength Bandpass (nm) -- Minimum: 100 nm Return Loss (Reflectance) -- Port 1 -40 dB Port 2 -55 dB Port 3 -55 dB Without connectors Isolation -- 35 dB Minimum Polarization Sensitivity -- <0.1 dB Fiber Types -- (Corning SMF-28) Multimode -- -40C to +65C (Operating) -40C to +75C (Storage) Singlemode -- -20C to +60C (Operating) -20C to +60C (Storage) Weight -- 42 grams [1.5 oz.] Pigtail -- 0.5 meter, [3 mm] OD cable, 900 m OD cable. Terminations and connectors available on request. Maximum Without connectors 1.3 dB With 2 connectors 2.3 dB Change in Transmission over operating temperatures +/- 0.5 dB Directivity (50/125, 62.5/125 only) -- Minimum: >45 dB Wavelength Bandpass (nm) -- Minimum: 100 nm Isolation -- 35 dB Minimum Fiber Types -- 50/125 and 62.5/125 Attenuators, WDMs, and Switches Customizable Features 5 185 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Lensed Wavelength Division Multiplexer and Demultiplexer (LWDM) Products (Continued) Singlemode and Multimode Lensed WDM's (Continued) Part Numbers Fiber 50/125 Multimode 62.5/125 Multimode Singlemode Cable Diameter Connector 850/1310 nm 1310/1550 nm 3 mm 3 mm 900 m 900 m 3 mm 3 mm 900 m 900 m 3 mm 3 mm 3 mm 3 mm 3 mm 900 m 900 m 900 m 900 m 900 m ST None ST None ST None ST None FC/APC None FC/UPC ST/UPC SC/UPC FC/APC None FC/UPC ST/UPC SC/UPC 5099102-2 5099108-1 9-5099102-2 9-5099108-1 5099102-3 5099108-2 9-5099102-3 9-5099108-2 -- -- -- -- -- -- -- 5099105-2 -- -- 9-5099111-1 5099105-3 -- 9-5099105-3 9-5099111-2 5099717-4 5099717-5 5099717-6 5099717-7 5099717-8 9-5099717-4 9-5099717-5 9-5099717-6 9-5099717-7 9-5099717-8 Note: Mux specific versions available when higher return loss required. Contact your local Tyco Electronics Sales Office. Cable length is 0.5 meter. Note: All part numbers are RoHS compliant. For custom mounting options, please contact your local Tyco Electronics' Sales Representative. Application 186 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches Ruggedized Multimode Switches Refractive Plate Switch 2 x 2 Bypass Configuration Part Number 6588871-1 Product Facts: No optical path interruption @200 G's for 8 ms Successfully passed MIL-S-901D (Navy) Heavyweight Shock Test (Barge Test) Fiber type 62.5/125 m multimode Operating Temperature Range -- -30 to +85 C Storage Temperature Range -- -40 to +85 C Durability -- >1,000,000 cycles Minimum Actuation Voltage -- 4.75 V Maximum Actuation Voltage -- 5.25 V Actuation Current at Typical -- 5.0 V Actuation Voltage -- 100mA (maximum) This switch is designed for extreme environments that require absolute product quality on optical installations and optical signal integrity. Attenuators, WDMs, and Switches Specifications Tyco Electronics' "Ruggedized" Refractive Plate Switch is a multimode optical switch that is capable of withstanding a 200 G shock with a duration of >8ms without interruption of the signal path. Product Dimensions: 5 NOTE Dimensions are Inches over millimeters Recommended Mounting Layout Note: All part numbers are RoHS compliant. 187 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch Product Facts Low profile Utilizes pivoting mirror Wide wavelength range Low insertion loss Excellent repeatability Environmentally stable Shock and vibration resistant Board or chassis mounting Optical & electrical leads exit from one end for easy cable routing Tyco Electronics Low Profile Fiber Optic Switches are miniature, board mountable devices that permit the switching of an optical signal from one fiber to another. Switching is accomplished by a slight pivoting motion of a spherical mirror which reflects the optical signal to the appropriate fiber. This patented imaging technology provides very low optical loss. available in the following configurations: 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch Tyco Electronics' SPDT and DPDT Switches permit the transfer of optic signals from an input fiber to either of two output fibers. Switches are applied to the positive terminal. The switch reverts to its original state when power is removed. Tyco Electronics' Fiber Optic Switches can be terminated with any Tyco fiber optic connector, and they are 2 x 2 Bypass Switch Tyco Electronics' Bypass Switches provide bypass protection for fiber optic ring networks. They also provide bypass protection for fiber optic ring networks per IEEE 802.5 and ANSI FDDI standards. A self-test path permits testing the node's transmitter against its receiver when the switch is in the bypass mode. This transmitter receiver path is attenuated to prevent saturation of the receiver, while maintaining minimal light loss in the bypass path. Specifications Configuration 1 x 2 and Dual 1 x 2 2 x 2 Fully Reversing Bypass Switching speed 10 milliseconds maximum 10 milliseconds maximum Operating wavelength 750-1450 nanometers 750-1450 nanometers Insertion loss at 1300 nm (Includes 2 connectors) 1.8 dB max. per FOTP-34, Method A2 1.8 dB max. per FOTP-34, Method A2 5 dB on loopback path max Crosstalk 45 dB per FOTP-42 45 dB per FOTP-42 Switch driver 5 V at 80mA max. 5 V at 80mA max. Drop In/Drop Out Drop In: 4.0 V minimum Drop In: 4.0 V minimum Voltage Drop Out: 0.5 V minimum Drop Out: 0.5 V minimum Fiber types Graded index 50/125, 62.5/125 Graded index 50/125, 62.5/125 (others available upon request) (others available upon request) Lead length 1 meter 1 meter Temperature range Operating -10C to +65C per FOTP-3, C2 Operating -10C to +65C per FOTP-3, C2 Storage -30C to +70C per FOTP-188, 4 Storage -30C to +70C per FOTP-188, 4 Connector styles Electrical interface ST Style ST Style (others available upon request) (others available upon request) Bent pins for PCB soldering Bent pins for PCB soldering Straight pins for soldering, or Tyco Electronics modular connector Straight pins for soldering, or Tyco Electronics modular connector Durability >1 million cycles >1 million cycles Weight (unconnectorized) <1 oz. <1 oz. 188 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch (Continued) Application Information 1 x 2 SPDT Possible Application Schematic Attenuators, WDMs, and Switches Dual 1 x 2 DPDT Possible Application Schematic Position 1 Position 2 5 2 x 2 Bypass Fully Reversing Schematic Possible Application 189 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch (Continued) Dimensions Switch 1 x 2 SPDT Dual 1x 2 DPDT 2x 2 Bypass Fiber Leads Used 1,2,3 1,2,3,4,5,6 1,2,3,4 Part Number Information Switch Type: Electrical Interface Bent Pin 1X2 Straight Pin Bent Pin Dual 1 X 2 Straight Pin Bent Pin 2 X 2 Bypass Straight Pin Fiber Connector None ST Style SC Style None ST Style SC Style None ST Style SC Style None ST Style SC Style None ST Style SC Style None ST Style SC Style Fiber Type: 900 m Loose Tube Cable Fiber Size Fiber Size 50/125 62.5/125 -- -- 5099414-1 5099414-2 -- -- 5099420-1 5099420-2 -- -- 8-5099420-1 8-5099420-2 5099973-1 5099973-2 -- -- 8-5099973-1 8-5099973-2 5099979-1 5099979-2 5099981-1 5099981-2 8-5099979-1 8-5099979-2 -- -- 5099416-1 5099416-2 -- -- -- -- -- -- -- -- 50/125 -1 3 mm Cable Jacket Fiber Size Fiber Size 50/125 62.5/125 5099403-1 5099403-2 5099415-1 5099415-2 8-5099403-1 8-5099403-2 -- 5099421-2 5099427-1 5099427-2 -- 8-5099421-2 5099974-1 5099974-2 -- -- 8-5099974-1 8-5099974-2 -- -- 5099982-1 5099982-2 -- -- 5099405-1 5099405-2 5099417-1 5099417-2 8-5099405-1 8-5099405-2 5099423-1 5099423-2 5099429-1 5099429-2 8-5099423-1 8-5099423-2 62.5/125 -2 Note: All part numbers are RoHS compliant. 190 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches Product Facts Increases reliability of mission-critical network applications Low insertion loss -- 1.8 dB typical, including connectors Choice of 62.5/125 m, 50/125 m Choice of FSD MIC, ST-style, or duplex SC connectors and ports Rack or panel-mount versions Compact size with all frontmounted connections to conserve space High-speed optical switching Simple to install Tyco Electronics' Bypass Switch is a secondgeneration device that allows a dual-attach station to be bypassed without loss of ring integrity. The switch module contains two fully reversing optical bypass switches that direct the optical signals to the appropriate fiber according to signals on the device's electrical interface. A spherical mirror, which is pivoted at high speeds between two stable positions, reflects light into specific fibers in either the operate or bypass state. Signal attenuation is very low on the network path. In the bypass state, the path from transmitter to receiver is attenuated to prevent receiver saturation. Holding the switches in the operating (non-bypass) state requires a 5-VDC, 160-mA power. Both switches return to the bypass state if the power is removed. Switching occurs in less than 10 ms. The modules are easy to install between a dual- Attenuators, WDMs, and Switches attached station and the ring. Pigtailed optical-fiber cables connect the switch module to the node, while the primary and secondary ring cables connect to the switch's A and B ports. The electrical connection is supplied by one of three standard electrical interfaces. A status LED lights when the switch is in the operate state. The bypass switch can be either booth panel or rack mounted. 5 Singlemode Bypass Modules Tyco Electronics offers Singlemode Bypass Modules designed to meet your optical path protection needs. For more information, please consult your local Tyco Electronics Sales Representative or call Tyco Electronics Product Information Center at 1-800-522-6752. 191 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches (Continued) Switch Operation: Bypass and Operate States Specifications Insertion Loss Operate Mode PI Line to PRX Station SI Line to SRX Station PTX Station to PO Line STX Station to SO Line Bypass Mode PI Line to PO Line SI Line to SO Line PTX Station to PRX Line STX Station to SRX Line Power On 1.8 dB Max. 1.8 dB Max. 1.8 db Max. 1.8 dB Max. Power Off 1.8 dB Max. 1.8 dB Max. 5.0 dB Max. 5.0 dB Max. Note: FOTP-34, Method A2. IL values given for ST/SC options. Switching Speed -- 10 ms max. Operating Wavelength -- 750 - 1450 nm Crosstalk -- 45 dB (FOTP-42) Switch Driver -- 5 V at 160 mA Fiber Type -- 62.5/125 m or 50/125 m graded index Operating Temperature -- -10C to +65C (FOTP-3, Condition C2) Storage Temperature -- -30C to +70C (FOTP-3, Condition C2) Durability -- >1 million cycles Weight -- 12 oz [340 g] 192 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches (Continued) Attenuators, WDMs, and Switches Switch Module Base Part Numbers Input Port Interface FSD MIC ST Duplex SC Mounting FSD MIC 5209161 5209164 -- -- -- 5209188 Panel Rack Panel Rack Panel Rack Part Numbers Optical Fiber Pigtails 62.5/125 m Fiber ST-style SC LC 5209162 5209163 -- 5209165 5209166 -- 5209174 5209175 -- 5209177 -- -- -- 5209187 1918973 -- 5209190 -- 50/125 m Fiber FSD MIC SC 5209167 -- 5209170 -- -- -- -- -- -- 5209193 -- 5209196 Note: All part numbers are RoHS compliant. 5 Switch Module Dash Numbers: Electrical Interface Dash Number -3 -4 -6 Station Connector 6-pos. Shielded Modular Plug 6-pos. Shielded Miniature Circular DIN Plug 4-pos. Modular Plug Note: The electrical cable consists of an 8-position modular plug at one end for connecting to the switch and one of the connectors listed at the other end. Ordering Information Select the required switch module. To the base part number for the module, add the dash number for the electrical interface you require for the station connector. Example: 5209163-3 is a switch with FSD MIC receptacles on ring ports, duplex SC connectors on the fiber pigtails, and a 6-position modular plug on the electrical cable. For other connector interfaces, contact your local Tyco Electronics Sales Representative 193 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches (Continued) Station Connector and Pinouts 6-Position Miniature DIN 6-Position Shielded Modular Plug 4-Position Modular Plug To Order the Electrical Interface Powercord Separately: Part Number 5209503-1 5209504-1 5209506-1 Station Connector 6-pos. Modular Plug 6-pos. Shielded Miniature DIN Plug 4-pos. Modular Plug Rack-Mount Panel Part Number 209197-1 Mounts in a 19-inch rack and accepts up to three switch modules. Note: All part numbers are RoHS compliant. 194 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639