177
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Table of Contents
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
Attenuators, WDM’s, and Switches
Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-184
Singlemode Build Out Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178-182
In Line Attenuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183, 184
Lensed Wavelength Division Multiplexer & Demultiplexer
(LWDM) Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185, 186
Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187-194
Ruggedized Multimode Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Multimode 1x2 SPDT Switch, Dual 1x2 DPDT Switch,
2x2 Bypass Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188-190
Multimode Bypass Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191-194
178
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators
Fiber Optic Products Catalog
Singlemode
Build Out Attenuators
Product Facts
A range of fixed attenuation
values. Standard values of
1 through 20 and 25 dB
UPC and APC offer Excellent
Return Loss
LC, SC, FC, ST, and
D4 styles
Attenuation is wavelength
independent and polarization
insensitive
Low PDL
Low modal noise
High reliability
Very low reflectance
Vibration resistant
Dual Window and
Broadband Bandpass
End face geometry per
GR-326
Designed to comply with
Telcordia GR-910
Applications
Power leveling in DWDM
transmission systems
Test and Measurement
Power attenuation at the
receiver
Available Collateral
Test reports qualifying
product to Telcordia
GR-910 (2004)
Application Specification
114-1129
Installation/Cleaning
Instruction Sheet
408-8895
Product Specification
108-2099
http://www.tycoelectronics.com/
documents
Customer Drawings
Tyco Electronics high
performance Build Out
Attenuators utilize a unique
all-fiber construction to
absorb the optical signal.
By employing a
Tyco Electronics’ technology,
the design minimizes
reflectance, attenuation
tolerance, and PDL while
maximizing reliability,
environmental stability, and
power handling. There are
no filters, air gaps, or core
mismatches.
Specifications
Attenuation Values
1-20 dB and 25 dB (Fixed)
Reflectance
-55 and -65 dB for UPC and APC
polish, respectively
Operating Temperature
-40°C to +75°C
Vibration Resistance
< 0.1 x attenuation
Customizable Features
Attenuation tolerance
Attenuation values in 1 dB
increments
Labeling
Kitting/Packaging
Wavelength Dependent Loss
Reflectance:
UPC to -55 dB max.
APC to -65 dB max.
179
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators (Continued)
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
LC/UPC
Singlemode
LC Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 1693560-1
2 1693560-2
3 1693560-3
4 1693560-4
5 1693560-5
6 1693560-6
7 1693560-7
8 1693560-8
9 1693560-9
10 1-1693560-0
11 1-1693560-1
12 1-1693560-2
13 1-1693560-3
14 1-1693560-4
15 1-1693560-5
16 1-1693560-6
17 1-1693560-7
18 1-1693560-8
19 1-1693560-9
20 2-1693560-0
25 2-1693560-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -55 dB
Note: All part numbers are RoHS
compliant.
180
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators (Continued)
Fiber Optic Products Catalog
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5209943-1
2 5209943-2
3 5209943-3
4 5209943-4
5 5209943-5
6 5209943-6
7 5209943-7
8 5209943-8
9 5209943-9
10 1-5209943-0
11 1-5209943-1
12 1-5209943-2
13 1-5209943-3
14 1-5209943-4
15 1-5209943-5
16 1-5209943-6
17 1-5209943-7
18 1-5209943-8
19 1-5209943-9
20 2-5209943-0
25 2-5209943-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max
Reflectance -55 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5209250-1
2 5209250-2
3 5209250-3
4 5209250-4
5 5209250-5
6 5209250-6
7 5209250-7
8 5209250-8
9 5209250-9
10 1-5209250-0
11 1-5209250-1
12 1-5209250-2
13 1-5209250-3
14 1-5209250-4
15 1-5209250-5
16 1-5209250-6
17 1-5209250-7
18 1-5209250-8
19 1-5209250-9
20 2-5209250-0
25 2-5209250-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max.
Reflectance -55 dB
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5209597-1
2 5209597-2
3 5209597-3
4 5209597-4
5 5209597-5
6 5209597-6
7 5209597-7
8 5209597-8
9 5209597-9
10 1-5209597-0
11 1-5209597-1
12 1-5209597-2
13 1-5209597-3
14 1-5209597-4
15 1-5209597-5
16 1-5209597-6
17 1-5209597-7
18 1-5209597-8
20 2-5209597-0
25 2-5209597-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -60 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5417021-1
2 5417021-2
3 5417021-3
4 5417021-4
5 5417021-5
6 5417021-6
7 5417021-7
8 5417021-8
9 5417021-9
10 1-5417021-0
11 1-5417021-1
12 1-5417021-2
13 1-5417021-3
14 1-5417021-4
15 1-5417021-5
16 1-5417021-6
17 1-5417021-7
18 1-5417021-8
19 1-5417021-9
20 2-5417021-0
25 2-5417021-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -65 dB
SC/UPC
Singlemode
SC Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
Note: Additional attenuation values
available upon request.
* 9° APC Available (Part Number 5417496-X)
Singlemode
SC Attenuators, Build Out
Style Fixed Value
SC/APC 8°
Note: All part numbers are RoHS compliant.
181
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators (Continued)
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
FC/UPC
Singlemode
FC Attenuators, Build Out
Style, Fixed Value
FC/APC (8°)
Note: Additional attenuation values
available upon request.
Note: Additional attenuation values
available upon request.
Singlemode
FC Attenuators, Build Out
Style, Fixed Value
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5209948-1
2 5209948-2
3 5209948-3
4 5209948-4
5 5209948-5
6 5209948-6
7 5209948-7
8 5209948-8
9 5209948-9
10 1-5209948-0
11 1-5209948-1
12 1-5209948-2
13 1-5209948-3
14 1-5209948-4
15 1-5209948-5
16 1-5209948-6
17 1-5209948-7
18 1-5209948-8
19 1-5209948-9
20 2-5209948-0
25 2-5209948-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -55 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5209285-1
2 5209285-2
3 5209285-3
4 5209285-4
5 5209285-5
6 5209285-6
7 5209285-7
8 5209285-8
9 5209285-9
10 1-5209285-0
11 1-5209285-1
12 1-5209285-2
13 1-5209285-3
14 1-5209285-4
15 1-5209285-5
16 1-5209285-6
17 1-5209285-7
18 1-5209285-8
19 1-5209285-9
20 2-5209285-0
25 2-5209285-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max.
Reflectance -55 dB
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 1754722-1
2 1754722-2
3 1754722-3
4 1754722-4
5 1754722-5
6 1754722-6
10 1-1754722-0
12 1-1754722-2
15 1-1754722-5
18 1-1754722-8
20 2-1754722-0
25 2-1754722-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -65 dB
Note: All part numbers are RoHS compliant.
182
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators (Continued)
Fiber Optic Products Catalog
D4/PC
Singlemode
D4 Attenuators, Build Out
Style, Fixed Value
Note: Additional attenuation values
available upon request.
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
5 5209570-5
10 1-5209570-0
15 1-5209570-5
20 2-5209570-0
Note: Attenuation Tolerance, Ambient
5 dB: ± .15 x nominal
attenuation value
< 5 dB: ± 0.75 dB
Reflectance -45 dB
ST/UPC
Singlemode
ST Attenuators, Build Out
Style, Fixed Value
Dual Window Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 5417549-1
2 5417549-2
3 5417549-3
4 5417549-4
5 5417549-5
6 5417549-6
7 5417549-7
8 5417549-8
9 5417549-9
10 1-5417549-0
11 1-5417549-1
12 1-5417549-2
13 1-5417549-3
14 1-5417549-4
15 1-5417549-5
16 1-5417549-6
17 1-5417549-7
18 1-5417549-8
19 1-5417549-9
20 2-5417549-0
25 2-5417549-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .15 x nominal
attenuation value
< 5 dB: ± 0.75 dB
Reflectance -55 dB
Broadband Bandpass Attenuators
Operating Wavelength
1260-1360 nm & 1430-1625 nm
Attenuation (dB) Part Number
1 5417399-1
2 5417399-2
3 5417399-3
4 5417399-4
5 5417399-5
6 5417399-6
7 5417399-7
8 5417399-8
9 5417399-9
10 1-5417399-0
11 1-5417399-1
12 1-5417399-2
13 1-5417399-3
14 1-5417399-4
15 1-5417399-5
16 1-5417399-6
17 1-5417399-7
18 1-5417399-8
19 1-5417399-9
20 2-5417399-0
25 2-5417399-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
0 dB: 0.50 dB max.
Reflectance -55 dB
Note: All part numbers are RoHS compliant.
183
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators (Continued)
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
In Line Attenuators
Product Facts
A range of fixed attenuation
values. Standard values of
1 through 20, and 25 dB
UPC offers Excellent
Return Loss
Attenuation is wavelength
independent and
polarization insensitive
Low PDL
Low modal noise
High reliability
-60 dB Reflectance
(unconnectorized)
Low cost
Vibration resistant
Single and Dual Window
Designed to comply with
Telcordia GR-910
Applications
Power leveling in DWDM
transmission systems
Test and Measurement
Power attenuation at the
receiver
Available Collateral
Product Specification
108-2103 Heavy Duty
3 mm cable
108-2130 Medium Duty
900 µm cable
Customer Drawings
Customizable Features
Lead lengths
Connectorized types,
including SC, FC, ST, & LC
LC available in Medium
Duty (900 µm cable) only
Available in Heavy Duty
(3 mm cable) and Medium
Duty (900 µm cable)
Tyco Electronics’ high
performance In Line
Attenuators utilize a unique
all fiber construction to
absorb the optical signal.
By employing a
Tyco Electronics’ technology,
the design minimizes
reflectance, attenuation
tolerance, and PDL while
maximizing reliability,
environmental stability, and
power handling. There are
no filters, air gaps, or core
mismatches.
Specifications
Attenuation Values
1-20 dB and 25 dB (Fixed)
Reflectance
-55 and -60 dB for UPC and
unterminated respectively
Operating Temperature
-40°C to +75°C
Vibration Resistance
< 0.1 x attenuation
184
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Attenuators (Continued)
Fiber Optic Products Catalog
Singlemode
In Line Attenuators,
Heavy Duty (3 mm cable),
Fixed Value
SC - SC
Singlemode
In Line Attenuators,
Medium Duty (900 µm
cable), Fixed Value
LC to LC
Dual Window In Line Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 6588517-1
2 6588517-2
3 6588517-3
4 6588517-4
5 6588517-5
6 6588517-6
7 6588517-7
8 6588517-8
9 6588517-9
10 1-6588517-0
11 1-6588517-1
12 1-6588517-2
13 1-6588517-3
14 1-6588517-4
15 1-6588517-5
16 1-6588517-6
17 1-6588517-7
18 1-6588517-8
19 1-6588517-9
20 2-6588517-0
25 2-6588517-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -55 dB
Dual Window In Line Attenuators
Operating Wavelength
1310/1550 nm ±25 nm
Attenuation (dB) Part Number
1 6588564-1
2 6588564-2
3 6588564-3
4 6588564-4
5 6588564-5
6 6588564-6
7 6588564-7
8 6588564-8
9 6588564-9
10 1-6588564-0
11 1-6588564-1
12 1-6588564-2
13 1-6588564-3
14 1-6588564-4
15 1-6588564-5
16 1-6588564-6
17 1-6588564-7
18 1-6588564-8
19 1-6588564-9
20 2-6588564-0
25 2-6588564-5
Note: Attenuation Tolerance, Ambient
5 dB: ± .10 x nominal
attenuation value
< 5 dB: ± 0.50 dB
Reflectance -50 dB
Note: All part numbers are RoHS compliant.
185
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Lensed Wavelength Division Multiplexer and Demultiplexer
(LWDM) Products
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
Singlemode and Multimode
Lensed WDM’s
Features
High isolation
Wide bandpass
Excellent reflectance
Small footprint
Applications
Two-way, single-fiber
video links
Instrumentation
Available Collateral
Customer Drawings
Customizable Features
Lead Lengths
Connector Type
Labels
Optical Specifications
Temperature
Multimode
–40°C to +65°C (Operating)
–40°C to +75°C (Storage)
Singlemode
–20°C to +60°C (Operating)
–20°C to +60°C (Storage)
Weight — 42 grams [1.5 oz.]
Pigtail — 0.5 meter, [3 mm] OD cable,
900 µm OD cable.
Terminations and connectors available
on request.
Specifications — Multimode
Insertion Loss
(per FOTP-180)
Maximum
Without connectors 1.3 dB
With 2 connectors 2.3 dB
Change in Transmission over
operating temperatures +/- 0.5 dB
Directivity
(50/125, 62.5/125 only)
Minimum: >45 dB
Wavelength Bandpass (nm)
Minimum: 100 nm
Isolation
35 dB Minimum
Fiber Types — 50/125 and 62.5/125
Tyco Electronics’
Multiplexers allow use of a
single fiber for simultaneous
transmission of two signals
of different wavelengths.
Tyco Electronics’
Demultiplexers separate the
combined wavelengths from
the single fiber into individ-
ual fibers. The universal
MUX/DEMUX’s are available
for multimode as well as
singlemode applications.
Through the use of high-
quality dichroic coatings,
which act as bandpass filters,
numerous wavelength com-
binations from 800-1600 nm
can be accommodated.
Unlike the narrow bandpass
of fused multiplexers, the
minimum bandpass of these
devices around the central
wavelength is ±50 nm. This
feature makes these multi-
plexers ideal for use in
broadband communication
applications.
These devices are unique
in that their optical perform-
ance is independent of
polarization effects of the
light source.
The 11.9 mm [7/16 inch]
thick encapsulated devices
with monolithic lens
structures tolerate vibration
and shock; their low profile
permits easy printed circuit
board mounting.
Specifications — Singlemode
Insertion Loss (per FOTP-180)
Maximum
Without connectors 1.3 dB
With 2 connectors 2.3 dB
Change in Transmission over
operating temperatures +/- 0.5 dB
Directivity
Minimum: >55 dB
Wavelength Bandpass (nm)
Minimum: 100 nm
Return Loss (Reflectance)
Port 1 –40 dB
Port 2 –55 dB
Port 3 –55 dB
Without connectors
Isolation
35 dB Minimum
Polarization Sensitivity — <0.1 dB
Fiber Types — (Corning SMF-28)
186
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Lensed Wavelength Division Multiplexer and Demultiplexer
(LWDM) Products (Continued)
Fiber Optic Products Catalog
Part Numbers
Fiber Cable Diameter Connector 850/1310 nm 1310/1550 nm
3 mm ST 5099102-2 5099105-2
50/125 3 mm None 5099108-1
Multimode 900 µm ST 9-5099102-2
900 µm None 9-5099108-1 9-5099111-1
3 mm ST 5099102-3 5099105-3
62.5/125 3 mm None 5099108-2
Multimode 900 µm ST 9-5099102-3 9-5099105-3
900 µm None 9-5099108-2 9-5099111-2
3 mm FC/APC 5099717-4
3 mm None 5099717-5
3 mm FC/UPC 5099717-6
3 mm ST/UPC 5099717-7
Singlemode 3 mm SC/UPC 5099717-8
900 µm FC/APC 9-5099717-4
900 µm None 9-5099717-5
900 µm FC/UPC 9-5099717-6
900 µm ST/UPC 9-5099717-7
900 µm SC/UPC 9-5099717-8
Note: Mux specific versions available when higher return loss required. Contact your local Tyco Electronics Sales Office.
Cable length is 0.5 meter.
Note: All part numbers are RoHS compliant.
Singlemode and Multimode
Lensed WDM’s (Continued)
Application
For custom mounting options,
please contact your local
Tyco Electronics’ Sales
Representative.
187
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
Ruggedized Multimode
Switches
Refractive Plate Switch
2 x 2 Bypass Configuration
Part Number
6588871-1
Product Facts:
No optical path interruption
@200 G’s for 8 ms
Successfully passed
MIL-S-901D (Navy)
Heavyweight Shock Test
(Barge Test)
Fiber type 62.5/125 µm
multimode
Specifications
Operating Temperature Range
-30° to +85° C
Storage Temperature Range
-40° to +85° C
Durability
>1,000,000 cycles
Minimum Actuation Voltage
4.75 V
Maximum Actuation Voltage
5.25 V
Actuation Current at Typical
5.0 V
Actuation Voltage
100mA (maximum)
Tyco Electronics’ “Ruggedized”
Refractive Plate Switch is a
multimode optical switch that
is capable of withstanding a
200 G shock with a duration
of >8ms without interruption
of the signal path.
This switch is designed for
extreme environments that
require absolute product
quality on optical installations
and optical signal integrity.
Recommended Mounting Layout
Product Dimensions:
Note: All part numbers are RoHS compliant.
NOTE
Dimensions are Inches
over millimeters
188
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Multimode
1 x 2 SPDT Switch
Dual 1 x 2 DPDT Switch
2 x 2 Bypass Switch
Product Facts
Low profile
Utilizes pivoting mirror
Wide wavelength range
Low insertion loss
Excellent repeatability
Environmentally stable
Shock and vibration
resistant
Board or chassis mounting
Optical & electrical leads
exit from one end for easy
cable routing
Tyco Electronics Low Profile
Fiber Optic Switches are
miniature, board mountable
devices that permit the
switching of an optical signal
from one fiber to another.
Switching is accomplished
by a slight pivoting motion
of a spherical mirror which
reflects the optical signal
to the appropriate fiber. This
patented imaging
technology provides very
low optical loss.
Tyco Electronics’ Fiber Optic
Switches can be terminated
with any Tyco fiber optic
connector, and they are
available in the following
configurations:
1 x 2 SPDT Switch
Dual 1 x 2 DPDT Switch
Tyco Electronics’ SPDT and
DPDT Switches permit the
transfer of optic signals from
an input fiber to either of
two output fibers. Switches
are applied to the positive
terminal. The switch reverts
to its original state when
power is removed.
2 x 2 Bypass Switch
Tyco Electronics’ Bypass
Switches provide bypass
protection for fiber optic
ring networks. They also
provide bypass protection
for fiber optic ring networks
per IEEE 802.5 and ANSI
FDDI standards.
A self-test path permits
testing the node's transmit-
ter against its receiver when
the switch is in the bypass
mode. This transmitter -
receiver path is attenuated
to prevent saturation of the
receiver, while maintaining
minimal light loss in the
bypass path.
Specifications
Configuration 1 x 2 and Dual 1 x 2 2 x 2 Fully Reversing Bypass
Switching speed 10 milliseconds maximum 10 milliseconds maximum
Operating wavelength 750–1450 nanometers 750–1450 nanometers
Insertion loss at 1300 nm 1.8 dB max. per FOTP-34, Method A2 1.8 dB max. per FOTP-34, Method A2
(Includes 2 connectors) 5 dB on loopback path max
Crosstalk 45 dB per FOTP-42 45 dB per FOTP-42
Switch driver 5 V at 80mA max. 5 V at 80mA max.
Drop In/Drop Out Drop In: 4.0 V minimum Drop In: 4.0 V minimum
Voltage Drop Out: 0.5 V minimum Drop Out: 0.5 V minimum
Fiber types Graded index 50/125, 62.5/125 Graded index 50/125, 62.5/125
(others available upon request) (others available upon request)
Lead length 1 meter 1 meter
Temperature range Operating –10°C to +65°C per FOTP-3, C2 Operating –10°C to +65°C per FOTP-3, C2
Storage –30°C to +70°C per FOTP-188, 4 Storage –30°C to +70°C per FOTP-188, 4
Connector styles ST Style ST Style
(others available upon request) (others available upon request)
Electrical interface Bent pins for PCB soldering Bent pins for PCB soldering
Straight pins for soldering, or Straight pins for soldering, or
Tyco Electronics modular connector Tyco Electronics modular connector
Durability >1 million cycles >1 million cycles
Weight (unconnectorized) <1 oz. <1 oz.
189
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
Application Information
Possible Application Schematic
Position 1
Position 2
Schematic
1 x 2 SPDT
Possible Application
Dual 1 x 2 DPDT
Possible Application
2 x 2 Bypass Fully Reversing
Schematic
Multimode
1 x 2 SPDT Switch
Dual 1 x 2 DPDT Switch
2 x 2 Bypass Switch (Continued)
190
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Dimensions
900 µm Loose Tube Cable 3 mm Cable Jacket
Switch Type: Electrical Fiber Fiber Size Fiber Size Fiber Size Fiber Size
Interface Connector 50/125 62.5/125 50/125 62.5/125
None 5099403-1 5099403-2
Bent Pin ST Style 5099414-1 5099414-2 5099415-1 5099415-2
1 X 2 SC Style 8-5099403-1 8-5099403-2
None 5099420-1 5099420-2 5099421-2
Straight Pin ST Style 5099427-1 5099427-2
SC Style 8-5099420-1 8-5099420-2 8-5099421-2
None 5099973-1 5099973-2 5099974-1 5099974-2
Bent Pin ST Style
Dual 1 X 2 SC Style 8-5099973-1 8-5099973-2 8-5099974-1 8-5099974-2
None 5099979-1 5099979-2
Straight Pin ST Style 5099981-1 5099981-2 5099982-1 5099982-2
SC Style 8-5099979-1 8-5099979-2
None 5099405-1 5099405-2
Bent Pin ST Style 5099416-1 5099416-2 5099417-1 5099417-2
2 X 2 Bypass SC Style 8-5099405-1 8-5099405-2
None 5099423-1 5099423-2
Straight Pin ST Style 5099429-1 5099429-2
SC Style 8-5099423-1 8-5099423-2
Part Number Information
Switch Fiber Leads Used
1x 2 SPDT 1,2,3
Dual 1x 2 DPDT 1,2,3,4,5,6
2x 2 Bypass 1,2,3,4
Multimode
1 x 2 SPDT Switch
Dual 1 x 2 DPDT Switch
2 x 2 Bypass Switch (Continued)
Fiber Type: 50/125 62.5/125
-1 -2
Note: All part numbers are RoHS compliant.
191
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
Multimode
Bypass Switches
Product Facts
Increases reliability of
mission-critical network
applications
Low insertion loss —
1.8 dB typical, including
connectors
Choice of 62.5/125 µm,
50/125 µm
Choice of FSD MIC,
ST-style, or duplex
SC connectors and ports
Rack or panel-mount
versions
Compact size with all front-
mounted connections to
conserve space
High-speed optical
switching
Simple to install
Tyco Electronics’ Bypass
Switch is a second-
generation device that
allows a dual-attach station
to be bypassed without loss
of ring integrity. The switch
module contains two fully
reversing optical bypass
switches that direct the
optical signals to the
appropriate fiber according
to signals on the device’s
electrical interface.
A spherical mirror, which is
pivoted at high speeds
between two stable
positions, reflects light into
specific fibers in either the
operate or bypass state.
Signal attenuation is very
low on the network path. In
the bypass state, the path
from transmitter to receiver
is attenuated to prevent
receiver saturation. Holding
the switches in the operating
(non-bypass) state requires
a 5-VDC, 160-mA power.
Both switches return to the
bypass state if the power is
removed. Switching occurs
in less than 10 ms.
The modules are easy to
install between a dual-
attached station and the
ring. Pigtailed optical-fiber
cables connect the switch
module to the node, while
the primary and secondary
ring cables connect to
the switch’s A and B ports.
The electrical connection
is supplied by one of
three standard electrical
interfaces. A status LED
lights when the switch is
in the operate state. The
bypass switch can be
either booth panel or rack
mounted.
Tyco Electronics offers Singlemode Bypass Modules designed to meet your optical path
protection needs. For more information, please consult your local Tyco Electronics Sales
Representative or call Tyco Electronics Product Information Center at 1-800-522-6752.
Singlemode Bypass Modules
192
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Specifications
Switching Speed — 10 ms max.
Operating Wavelength
750 - 1450 nm
Crosstalk 45 dB (FOTP-42)
Switch Driver — 5 V at 160 mA
Fiber Type — 62.5/125 µm or
50/125 µm graded index
Operating Temperature
-10°C to +65°C (FOTP-3, Condition C2)
Storage Temperature
-30°C to +70°C (FOTP-3, Condition C2)
Durability — >1 million cycles
Weight — 12 oz [340 g]
Switch Operation: Bypass and Operate States
Multimode
Bypass Switches
(Continued)
Operate Mode Power On
PI Line to PRX Station 1.8 dB Max.
SI Line to SRX Station 1.8 dB Max.
PTX Station to PO Line 1.8 db Max.
STX Station to SO Line 1.8 dB Max.
Bypass Mode Power Off
PI Line to PO Line 1.8 dB Max.
SI Line to SO Line 1.8 dB Max.
PTX Station to PRX Line 5.0 dB Max.
STX Station to SRX Line 5.0 dB Max.
Note: FOTP-34, Method A2. IL values given for ST/SC options.
Insertion Loss
193
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Attenuators, WDMs, and Switches
5
Multimode
Bypass Switches
(Continued)
Switch Module Base Part Numbers
Part Numbers
Input Optical Fiber Pigtails
Port Mounting 62.5/125 µm Fiber 50/125 µm Fiber
Interface
FSD MIC ST-style SC LC FSD MIC SC
FSD MIC Panel 5209161 5209162 5209163 5209167
Rack 5209164 5209165 5209166 5209170
ST Panel 5209174 5209175
Rack 5209177
Duplex SC Panel 5209187 1918973 5209193
Rack 5209188 5209190 5209196
Note: All part numbers are RoHS compliant.
Switch Module Dash Numbers: Electrical Interface
Dash Number Station Connector
-3 6-pos. Shielded Modular Plug
-4 6-pos. Shielded Miniature Circular DIN Plug
-6 4-pos. Modular Plug
Ordering Information
Select the required switch module. To the base part number for the module, add the dash
number for the electrical interface you require for the station connector. Example: 5209163-3
is a switch with FSD MIC receptacles on ring ports, duplex SC connectors on the fiber
pigtails, and a 6-position modular plug on the electrical cable.
Note: The electrical cable consists
of an 8-position modular plug at one
end for connecting to the switch and
one of the connectors listed at the
other end.
For other connector
interfaces, contact your local
Tyco Electronics Sales
Representative
194
Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 11-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 31-73-624-6639
Switches (Continued)
Fiber Optic Products Catalog
Rack-Mount Panel
Part Number 209197-1 Mounts in a 19-inch rack and accepts up to three switch modules.
Multimode
Bypass Switches
(Continued)
Station Connector
and Pinouts
To Order the Electrical Interface Powercord Separately:
Part Number Station Connector
5209503-1 6-pos. Modular Plug
5209504-1 6-pos. Shielded Miniature DIN Plug
5209506-1 4-pos. Modular Plug
Note: All part numbers are RoHS compliant.
6-Position
Shielded Modular Plug
6-Position
Miniature DIN
4-Position
Modular Plug