1
G3VM-61GR2
MOS FET Relays
MOS FET Relays with 1.7-A switching
Designed for Switching Minute Signals
and Analog Signals.
•Continuous load current of 1.7 A.
■Application Examples ■
Terminal Arrangement /Internal Connections
■List of Models
*The AC peak and DC value are given for the load voltage.
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
RoHS compliant Note: The actual product is marked differently from the
image shown here.
•Semiconductor test equipment
•Test & Measurement equipment
•Communication equipment
•Data loggers
43
12
OMRON logo
Pin 1 mark
Model name
LOT.No.
932
Mold pin mark *
Note: The actual product is marked differently from the image shown here.
*The indentation in the corner diagonally opposite from the pin 1 mark is from
a pin on the mold.
Package type Contact form Terminals Load voltage
(peak value) *Model Minimum package quantity
Number per tube
Number per tape and reel
SOP4 1a
(SPST-NO) Surface-mounting Terminals 60 V G3VM-61GR2 100 -
G3VM-61GR2 (TR05) -500
Item Symbol Rating Unit Measurement conditions
Input
LED forward current IF30 mA
Note: 1. The dielectric strength between the input and
output was checked by applying voltage
between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
LED forward current reduction rate
∆IF/°C−0.3 mA/°C Ta ≥ 25°C
LED reverse voltage VR5 V
Connection temperature
TJ125 °C
Output
Load voltage (AC peak/DC)
VOFF 60 V
Continuous load current (AC peak/DC)
IO1.7 A
ON current reduction rate
∆IO/°C−17 mA/°C Ta ≥ 25°C
Pulse ON current IOp 5 A t = 100 ms, Duty = 1/10
Connection temperature
TJ125 °C
Dielectric strength between
I/O (See note 1.) VI-O 1500 Vrms AC for 1 min
Ambient operating temperature
Ta −40 to +85 °C With no icing or condensation
Ambient storage temperature
Tstg −55 to +125 °C With no icing or condensation
Soldering temperature -260 °C10 s
Item Symbol
Minimum
Typical
Maximum
Unit Measurement conditions
Input
LED forward voltage VF1.18 1.33 1.48 V IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times
Reverse current IR- - 10 µA VR = 5 V
Capacity between terminals
CT- 70 - pF V = 0, f = 1 MHz
Trigger LED forward current
IFT -0.63 mA IO = 100 mA
Turn-OFF LED forward current
IFC 0.1 - - mA IOFF = 100 µA
Output
Maximum resistance with output ON
RON -0.080.13Ω
I
F
= 5 mA, I
O
= 1.7 A, t < 1 s
Current leakage when the relay is open
ILEAK - 1 10 nA VOFF = 60 V
Capacity between terminals
Coff - 250 - pF V = 0, f = 1 MHz
Capacity between I/O terminals
CI-O - 0.8 - pF f = 1 MHz, VS = 0 V
Insulation resistance between I/O terminals
RI-O 1000 108-MΩ
V
I-O
= 500 VDC, R
O
H
≤
60 %
Turn-ON time tON -0.73ms
IF = 5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF -0.10.5ms
VOUT
IF
tON tOFF
10% 90%
IF1
2
4
3
RLVDD
VOUT
2
G3VM-61GR2 MOS FET Relays
■Recommended Operating Conditions
For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute
Maximum Ratings and Electrical Characteristics. Each item on this list is an independent condition, so it is not simultaneously satisfy
several conditions.
■Engineering Data
■Safety Precautions
•Refer to "Common Precautions" for all G3VM models.
Item Symbol Minimum Typical Maximum Unit
Load voltage (AC peak/DC) VDD - - 48 V
Operating LED forward current
IF5 10 25 mA
Continuous load current (AC peak/DC)
IO--1.3A
Ambient operating temperature
Ta -20 - 65 °C
LED forward current vs. Ambient
temperature
Continuous load current vs. Ambient
temperature
LED forward current vs. LED forward
voltage
Continuous load current vs. On-state
voltage
On-state resistance vs. Ambient
temperature
Trigger LED forward current vs.
Ambient temperature
Turn ON, Turn OFF time vs. LED
forward current
Turn ON, Turn OFF time vs. Ambient
temperature
Current leakage vs. Ambient
temperature
I
F
- Ta
Ambient temperature Ta (°C)
LED forward current I
F
(mA)
0
10
20
30
40
50
-40 -20 0 20 40 60 80 100
(Maximum value)
I
O
- Ta
Ambient temperature Ta (°C)
Continuous load current I
O
(A)
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
-40 -20 0 20 40 60 80 100
(Maximum value)
I
F
- V
F
LED forward voltage V
F
(V)
0.01
0.1
1
10
100
0.6 0.8 1 1.2 1.4 1.6 1.8
Ta = 25 °C
LED forward current I
F
(mA)
(Average value)
I
O
- V
ON
On-state voltage V
ON
(V)
-2
-1.5
-1
-0.5
0
0.5
1
1.5
2
-0.2 -0.1 0 0.1 0.2
Ta = 25 °C
IF = 5 mA
Continuous load current I
O
(A)
(Average value)
R
ON
- Ta
Ambient temperature Ta (°C)
0
0.1
0.2
-40 -20 0 20 40 60 80 100
IO = 1.7 A
IF = 5 mA
t < 1 s
On-state resistance R
ON
(Ω)
(Average value)
I
FT
- Ta
Ambient temperature Ta (°C)
Trigger LED forward current I
FT
(mA)
0
0.5
1
1.5
2
-40 -20 0 20 40 60 80 100
IO = 100 mA
(Average value)
0.01
0.1
1
10
1
Turn ON, Turn OFF time t
ON
, t
OFF
(ms)
t
ON
, t
OFF
- I
F(Average value)
t
OFF
t
ON
Ta = 25 °C
VDD = 20 V
RL = 200 Ω
LED forward current I
F
(mA)
10 100
t
ON
, t
OFF
- Ta
Ambient temperature Ta (°C)
0.01
0.1
1
10
-40 -20 0 20 40 60 80 100
t
ON
t
OFF
VDD = 20 V
RL = 200 Ω
IF = 5 mA
Turn ON, Turn OFF time t
ON
, t
OFF
(ms)
(Average value)
I
LEAK
- Ta
Ambient temperature Ta (°C)
0.01
0.1
1
10
100
-20 0 20406080100
VOFF = 60 V
Current leakage I
LEAK
(nA)
(Average value)
Appearance/Dimensions SOP4 type
■Appearance
■Dimensions (Unit: mm)
Note: The actual product is marked differently from the image shown here.
Actual Mounting Pad
Dimensions
(Recommended Value, TOP VIEW)
SOP4
SOP (Small Outline Package)
SOP (Small Outline Package)
OMRON logo
Pin 1 mark
Model name
LOT.No.
932
Note: The actual product is marked differently from the image shown here.
* The indentation in the corner diagonally opposite from the pin 1 mark is from a pin on the mold.
Mold pin mark *
4.4±0.25
3.9±0.2
0.4±0.1
2.54±0.25
2.1 max.
0.1±0.1
7.0±0.4
0.6±0.3
0.15
Surface-mounting Terminals
Weight: 0.1 g
6 to 6.3
1.2
0.8
2.54
• Application examples provided in this document are for reference only. In actual applications, confirm equipment functions and safety before using the product.
• Consult your OMRON representative before using the product under conditions which are not described in the manual or applying the product to nuclear control systems, railroad
systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other systems or equipment that may have a serious
influence on lives and property if used improperly. Make sure that the ratings and performance characteristics of the product provide a margin of safety for the system or
equipment, and be sure to provide the system or equipment with double safety mechanisms.
Cat. No. K281-E1-01
1015(1015)(O)
Note: Do not use this document to operate the Unit.
OMRON Corporation
Electronic and Mechanical Components Company Contact: www.omron.com/ecb
