TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1&5
T322 & T323 (CX01 & CX05) SERIES
42 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
The KEMET T322 AND T323 (CX01 & CX05) Series offers a com-
plete line of extended range molded solid tantalum capacitors
designed specifically for high speed automatic insertion applications.
These capacitors offer an extremely high capacitance-to-volume
ratio while still maintaining excellent performance characteristics.
Supplied in six axial lead tubular case sizes, these capacitors are
ideally suited for use in printed wiring boards and all applications
requiring a high degree of packaging density and can be supplied in
bulk packaging or lead-taped on reels.
The T322/T323 Series dimensions and tight lead wire-to-body con-
centricity permit installation by the same automatic insertion equip-
ment used for diodes and resistors. Available in working voltages of
2, 4, 6, 10, 15, 20, 25, 35, and 50 volts. Operating temperature range
-55°C to +85°C at full rated voltage and with 2⁄385°C rated voltage
at 125°C.
The gold color epoxy utilized permits laser marking with outstanding
permanency and legibility.
T323 Series capacitors are qualified under MIL-PRF-49137/1 & 5 as
Military Style CX01 & CX05.
Typical applications include decoupling, blocking, bypassing and fil-
tering in commercial computers, data processing, communications,
and other electronic equipment. The low ESR/impedance at high fre-
quencies offered by this capacitor is especially suitable for decou-
pling required by high speed computers.
•CAPACITANCE/VOLTAGE RANGE:
0.1-330µF, 2-50 Volts.
•CAPACITANCE TOLERANCE: Available in standard
EIA nominal values with ±20%, ±10% and ±5% toler-
ance.
•DISSIPATION FACTOR: Maximum DF limits are shown
in corresponding series part number listings on pages
44-48. See Application Notes Section, page 76 for addi-
tional description.
•DC LEAKAGE CURRENT: Each corresponding part
number table lists maximum leakage current for each
capacitor on pages 44 through 48. See Application
Notes Section, page 76 for additional description.
•RATED VOLTAGE; WORKING VOLTAGE; SURGE
VOLTAGE; REVERSE VOLTAGE: See Application
Notes Section, page 76 & 77 for description.
•AC RIPPLE VOLTAGE: Permissible AC ripple voltage is
related to equivalent series resistance (ESR) and power
dissipation capability. Maximum power dissipation for
each case size is listed in Table below. For additional
description see page 79.
•IMPEDANCE and ESR: See Application Notes Section,
pages 77 & 78 for description. Reference ESR values
are shown in adjoining column, this page.
•ENVIRONMENTAL CONSIDERATIONS:
A. Shock Test: MIL-STD-202, Method 213.
B. Thermal Shock, MIL-STD-202, Method 107.
C. Moisture Resistance: MIL-STD-202, Method 106.
D. Solderability: MIL-STD-202, Method 208.
For additional Environmental Test Information see
pages 80, 81 and 82.
•LEAD MATERIAL: Solder coated steel core with copper
ply per MIL-STD-1276.
•LEAD TAPE and REEL: Reeling per specification
RS-296. See pages 71 and 73 for additional infor-
mation.
PERFORMANCE CHARACTERISTICS
Case Power Dissipation
Size (max.) @ 25°C (watts)
A .060
B .070
C .080
D .090
E .100
F.110
Maximum Power Dissipation Capability @ 25°C
T322 ESR (OHMS) at 100 kHz @ +25°C
(The ESR values provided below are for reference
only. No warranty, as stated on page 3 and
reincorporated here, is made as to the accuracy of
these values for any particular T322 Series product.)
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.00
1.20
1.50
1.80
2.20
2.70
3.30
3.90
4.70
5.60
6.80
8.20
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
220.0
270.0
330.0
13.0
13.0
10.0
10.0
8.0
8.0
6.0
6.0
5.0
5.0
3.7
3.7
3.0
3.0
2.0
2.0
1.8
1.8
1.6
1.6
0.9
0.9
0.9
0.9
0.7
13.0
13.0
10.0
10.0
8.0
8.0
6.0
6.0
5.0
5.0
3.7
3.7
2.7
2.7
2.1
2.1
1.7
1.7
1.3
1.3
1.0
1.0
0.8
0.8
0.6
10.0
10.0
8.0
8.0
6.0
6.0
5.0
5.0
4.0
4.0
3.2
3.2
2.5
2.5
2.0
2.0
1.6
1.6
1.3
1.3
1.0
1.0
0.8
0.8
0.6
10.0
10.0
9.0
9.0
7.0
7.0
5.5
5.5
4.5
4.5
3.6
3.6
2.9
2.9
2.3
2.3
1.8
1.8
1.4
1.4
1.2
1.2
0.9
0.9
0.6
16.0
14.0
12.0
12.0
10.0
10.0
8.0
8.0
6.0
6.0
5.0
5.0
4.0
4.0
3.1
3.1
2.5
2.5
2.0
2.0
1.5
1.5
1.2
1.2
1.0
1.0
0.8
26.0
26.0
21.0
21.0
17.0
17.0
15.0
15.0
13.0
13.0
10.0
10.0
8.0
8.0
6.0
6.0
5.0
5.0
4.0
4.0
3.0
3.0
2.5
2.5
2.0
2.0
1.6
1.6
1.3
1.3
1.0
1.0
0.8
26.0
26.0
21.0
21.0
17.0
17.0
15.0
15.0
13.0
13.0
10.0
10.0
8.0
8.0
5.0
5.0
3.5
3.5
3.0
3.0
2.5
2.5
2.0
2.0
1.6
1.6
1.2
1.2
1.0
1.0
Cap.
µF6
Volt 10
Volt 15
Volt 20
Volt 25
Volt 35
Volt 50
Volt
TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5
T322 & T323 (CX01 & CX05) SERIES
T322/T323 Tantalum
Molded / Axial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 43
CAPACITOR OUTLINE DRAWINGS
DL
B
1.50±.250
(38.10±6.35) 1.50±.250
(38.10±6.35)
+
DIMENSIONS — INCHES & (MILLIMETERS)
CASE SIZE D (MAX) L (MAX) W
A .095 (2.41) .260 (6.6) .020 (.51)
B .110 (2.79) .290 (7.37) .020 (.51)
C .180 (4.57) .345 (8.76) .020 (.51)
D .180 (4.57) .420 (10.67) .020 (.51)
E .280 (7.11) .530 (13.46) .025 (.64)
F .300 (7.62) .710 (18.03) .025 (.64)
T322 & T323 ORDERING INFORMATION
T 32X A 474 M 035 A S — C*
TANTALUM
SERIES
Sub-Miniature, Molded, Polar, Solid Tantalum,
Insert appropriate number to replace
letter “X” — 322 or 323 (CX01, CX05).
CASE SIZE
A, B, C, D, E, or F
CAPACITANCE IN PICOFARADS
First two digits are significant figures.
Third digit is number of zeros following.
SPECIFICATION
(when necessary
— Reeling Per EIA
Specification RS-296
LEAD MATERIAL
S — Standard
FAILURE RATE LEVEL
A — Not Applicable
VOLTAGE RATING
CAPACITANCE TOLERANCE
*M — ±20%
*K — ±10%
*J — ±5%
* M & K only tolerances available
for T323 Series.
MIL-PRF-49137/5 MILITARY ORDERING INFORMATION
CX 05 D 225 K
TYPE
Capacitor, Fixed, Solid Tantalum,
Molded, Non-hermetically Sealed
STYLE
01, 05 (T323) A, B, C, and D
VOLTAGE
CAPACITANCE TOLERANCE
Symbol Capacitance Tolerance
Percent (±)
K10
M20
CAPACITANCE TOLERANCE
The nominal capacitance value, expressed in
picofarads (pF), is identified by a three-digit
number; the first two digits represent sig-
nificant figures and the last digit specifies the
number of zeros to follow.
Rated (85°C) Surge (85°C)
Symbol Volts, DC Volts, DC
D 6 8.0
F 10 13.0
H 15 20.0
J 20 26.0
K 25 32.0
M 35 46.0
N 50 65.0
Capacitance Value (pF), Capacitance Tolerance
Polarity, Voltage, KEMET
Date Code (Year, Week)
105M
+25 K
0324
CAPACITOR MARKING
W
*Part Number Example: T322A474M035AS (14 digits – no spaces)
Effective September 30, 2005, the KEMET T322 Series is RoHS compliant.
T – 100% Tin
KEMET T322 SERIES
MAX.
DISSIPATION
CAPACITANCE D.C. FACTOR
CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET
µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER
2 VOLT RATING AT 85°C — 1.3 VOLT RATING AT 125°C
6.8 A 5,10,20 T322A685(1)002AS 0.5 10
8.2 A 5,10,20 T322A825(1)002AS 0.5 10
10.0 A 5,10,20 T322A106(1)002AS 0.5 10
12.0 B 5,10,20 T322B126(1)002AS 0.5 10
15.0 B 5,10,20 T322B156(1)002AS 0.5 10
18.0 B 5,10,20 T322B186(1)002AS 0.5 10
22.0 B 5,10,20 T322B226(1)002AS 0.5 10
27.0 B 5,10,20 T322B276(1)002AS 0.5 10
33.0 B 5,10,20 T322B336(1)002AS 0.5 10
39.0 C 5,10,20 T322C396(1)002AS 0.6 10
47.0 C 5,10,20 T322C476(1)002AS 0.8 10
56.0 C 5,10,20 T322C566(1)002AS 0.9 10
68.0 C 5,10,20 T322C686(1)002AS 1.1 10
4 VOLT RATING AT 85°C — 2.7 VOLT RATING AT 125°C
4.7 A 5,10,20 T322A475(1)004AS 0.5 8
5.6 A 5,10,20 T322A565(1)004AS 0.5 8
6.8 A 5,10,20 T322A685(1)004AS 0.5 8
8.2 B 5,10,20 T322B825(1)004AS 0.5 8
10.0 B 5,10,20 T322B106(1)004AS 0.5 8
12.0 B 5,10,20 T322B126(1)004AS 0.5 8
15.0 B 5,10,20 T322B156(1)004AS 0.5 8
18.0 B 5,10,20 T322B186(1)004AS 0.6 8
22.0 B 5,10,20 T322B226(1)004AS 0.7 8
27.0 C 5,10,20 T322C276(1)004AS 0.9 8
33.0 C 5,10,20 T322C336(1)004AS 1.1 8
39.0 C 5,10,20 T322C396(1)004AS 1.2 8
47.0 C 5,10,20 T322C476(1)004AS 1.5 8
56.0 D 5,10,20 T322D566(1)004AS 1.8 8
68.0 D 5,10,20 T322D686(1)004AS 2.2 8
6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C
3.3 A 5,10,20 T322A335(1)006AS 0.5 4
3.9 A 5,10,20 T322A395(1)006AS 0.5 4
4.7 A 5 T322A475J006AS 0.5 4
4.7 A 10 T322A475K006AS 0.5 4 CX05D475K T323A475K006AS
4.7 A 20 T322A475M006AS 0.5 4 CX05D475M T323A475M006AS
5.6 B 5 T322B565J006AS 0.5 4
5.6 B 10 T322B565K006AS 0.5 4 CX01D565K T323B565K 006AS
5.6 B 20 T322B565M006AS 0.5 4 CX01D565M T323B565M006AS
6.8 B 5 T322B685J006AS 0.5 6
6.8 B 10 T322B685K006AS 0.5 6 CX01D685K T323B685K006AS
6.8 B 20 T322B685M006AS 0.5 6 CX01D685M T323B685M006AS
8.2 B 5 T322B825J006AS 0.5 6
8.2 B 10 T322B825K006AS 0.5 6 CX01D825K T323B825K 006AS
8.2 B 20 T322B825M006AS 0.5 6 CX01D825M T323B825M006AS
10.0 B 5 T322B106J006AS 0.5 6
10.0 B 10 T322B106K006AS 0.5 6 CX01D106K T323B106K006AS
10.0 B 20 T322B106M006AS 0.5 6 CX01D106M T323B106M006AS
12.0 B 5 T322B126J006AS 0.6 6
12.0 B 10 T322B126K006AS 0.6 6 CX01D126K T323B126K 006AS
12.0 B 20 T322B126M006AS 0.6 6 CX01D126M T323B126M006AS
15.0 B 5 T322B156J006AS 0.7 6
15.0 B 10 T322B156K006AS 0.7 6 CX05D156K T323B156K006AS
15.0 B 20 T322B156M006AS 0.7 6 CX05D156M T323B156M006AS
18.0 C 5,10,20 T322C186(1)006AS 0.9 6
22.0 C 5,10,20 T322C226(1)006AS 1.1 6
27.0 C 5,10,20 T322C276(1)006AS 1.3 6
33.0 C 5 T322C336J006AS 1.5 6
33.0 C 10 T322C336K006AS 1.5 6 CX05D336K T323C336K006AS
33.0 C 20 T322C336M006AS 1.5 6 CX05D336M T323C336M006AS
39.0 D 5,10,20 T322D396(1)006AS 1.9 6
47.0 D 5 T322D476J006AS 2.3 6
47.0 D 10 T322D476K006AS 2.3 6 CX05D476K T323D476K006AS
47.0 D 20 T322D476M006AS 2.3 6 CX05D476M T323D476M006AS
56.0 D 5,10,20 T322D566(1)006AS 2.7 6
68.0 D 5,10,20 T322D686(1)006AS 3.3 6
TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5
T322 & T323 (CX01 & CX05) SERIES
44 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5%
Bold Face lines indicate preferred part types and values.
CX01 & CXO5 CAPACITORS
PER MIL-PRF-49137/1 & 5
KEMET T322 SERIES
MAX.
DISSIPATION
CAPACITANCE D.C. FACTOR
CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET
µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER
6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C (Cont’d)
82.0 E 5,10,20 T322E826(1)006AS 3.9 8
100.0 E 5,10,20 T322E107(1)006AS 4.8 8
120.0 E 5,10,20 T322E127(1)006AS 5.0 8
150.0 E 5,10,20 T322E157(1)006AS 5.0 8
180.0 E 5,10,20 T322E187(1)006AS 8.6 8
220.0 E 5,10,20 T322E227(1)006AS 10.0 8
270.0 F 5,10,20 T322F277(1)006AS 10.0 8
330.0 F 5,10,20 T322F337(1)006AS 10.0 8
10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C
2.2 A 5,10,20 T322A225(1)010AS 0.5 4
2.7 A 5,10,20 T322A275(1)010AS 0.5 4
3.3 A 5 T322A335J010AS 0.5 4
3.3 A 10 T322A335K010AS 0.5 4 CX05F335K T323A335K010AS
3.3 A 20 T322A335M010AS 0.5 4 CX05F335M T323A335M010AS
3.9 B 5,10,20 T322B395(1)010AS 0.5 4
4.7 B 5,10,20 T322B475(1)010AS 0.5 4
5.6 B 5,10,20 T322B565(1)010AS 0.5 4
6.8 B 5,10,20 T322B685(1)010AS 0.5 6
8.2 B 5,10,20 T322B825(1)010AS 0.7 6
10.0 B 5 T322B106J010AS 0.8 6
10.0 B 10 T322B106K010AS 0.8 6 CX05F106K T323B106K010AS
10.0 B 20 T322B106M010AS 0.8 6 CX05F106M T323B106M010AS
12.0 C 5,10,20 T322C126(1)010AS 1.0 6
15.0 C 5,10,20 T322C156(1)010AS 1.2 6
18.0 C 5,10,20 T322C186(1)010AS 1.4 6
22.0 C 5 T322C226J010AS 1.5 6
22.0 C 10 T322C226K010AS 1.5 6 CX05F226K T323C226K010AS
22.0 C 20 T322C226M010AS 1.5 6 CX05F226M T323C226M010AS
27.0 D 5 T322D276J010AS 2.2 6
27.0 D 10 T322D276K010AS 2.2 6 CX05F276K T323D276K010AS
27.0 D 20 T322D276M010AS 2.2 6 CX05F276M T323D276M010AS
33.0 D 5 T322D336J010AS 2.6 6
33.0 D 10 T322D336K010AS 2.6 6 CX05F336K T323D336K010AS
33.0 D 20 T322D336M010AS 2.6 6 CX05F336M T323D336M010AS
39.0 D 5 T322D396J010AS 3.1 6
39.0 D 10 T322D396K010AS 3.1 6 CX05F396K T323D396K010AS
39.0 D 20 T322D396M010AS 3.1 6 CX05F396M T323D396M010AS
47.0 D 5 T322D476J010AS 3.8 6
47.0 D 10 T322D476K010AS 3.8 6 CX05F476K T323D476K010AS
47.0 D 20 T322D476M010AS 3.8 6 CX05F476M T323D476M010AS
56.0 E 5,10,20 T322E566(1)010AS 4.4 6
68.0 E 5,10,20 T322E686(1)010AS 5.0 6
82.0 E 5,10,20 T322E826(1)010AS 5.0 8
100.0 E 5,10,20 T322E107(1)010AS 8.0 8
120.0 E 5,10,20 T322E127(1)010AS 9.6 8
150.0 E 5,10,20 T322E157(1)010AS 10.0 8
180.0 F 5,10,20 T322F187(1)010AS 10.0 8
220.0 F 5,10,20 T322F227(1)010AS 10.0 8
15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C
1.5 A 5,10,20 T322A155(1)015AS 0.5 4
1.8 A 5,10,20 T322A185(1)015AS 0.5 4
2.2 A 5 T322A225J015AS 0.5 4
2.2 A 10 T322A225K015AS 0.5 4 CX05H225K T323A225K015AS
2.2 A 20 T322A225M015AS 0.5 4 CX05H225M T323A225M015AS
2.7 B 5,10,20 T322B275(1)015AS 0.5 4
3.3 B 5,10,20 T322B335(1)015AS 0.5 4
3.9 B 5,10,20 T322B395(1)015AS 0.5 4
4.7 B 5,10,20 T322B475(1)015AS 0.6 4
5.6 B 5,10,20 T322B565(1)015AS 0.7 4
6.8 B 5 T322B685J015AS 0.8 6
6.8 B 10 T322B685K015AS 0.8 6 CX05H685K T323B685K015AS
6.8 B 20 T322B685M015AS 0.8 6 CX05H685M T323B685M015AS
8.2 C 5,10,20 T322C825(1)015AS 1.0 6
10.0 C 5,10,20 T322C106(1)015AS 1.2 6
12.0 C 5,10,20 T322C126(1)015AS 1.4 6
15.0 C 5 T322C156J015AS 1.5 6
15.0 C 10 T322C156K015AS 1.5 6 CX05H156K T323C156K015AS
15.0 C 20 T322C156M015AS 1.5 6 CX05H156M T323C156M015AS
TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5
T322 & T323 (CX01 & CX05) SERIES
T322/T323 Series Tantalum
Molded / Axial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 45
CX01 & CXO5 CAPACITORS
PER MIL-PRF-49137/1 & 5
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5%
Bold Face lines indicate preferred part types and values.
KEMET T322 SERIES
MAX.
DISSIPATION
CAPACITANCE D.C. FACTOR
CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET
µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER
15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C (Cont’d)
18.0 D 5,10,20 T322D186(1)015AS 2.2 6
22.0 D 5 T322D226J015AS 2.6 6
22.0 D 10 T322D226K015AS 2.6 6 CX05H226K T323D226K015AS
22.0 D 20 T322D226M015AS 2.6 6 CX05H226M T323D226M015AS
27.0 D 5,10,20 T322D276(1)015AS 3.2 6
33.0 D 5 T322D336J015AS 4.0 6
33.0 D 10 T322D336K015AS 4.0 6 CX05H336K T323D336K015AS
33.0 D 20 T322D336M015AS 4.0 6 CX05H336M T323E336M015AS
39.0 E 5,10,20 T322E396(1)015AS 4.7 6
47.0 E 5,10,20 T322E476(1)015AS 5.0 6
56.0 E 5,10,20 T322E566(1)015AS 6.7 6
68.0 E 5,10,20 T322E686(1)015AS 8.2 6
82.0 E 5,10,20 T322E826(1)015AS 9.8 8
100.0 E 5,10,20 T322E107(1)015AS 10.0 8
120.0 F 5,10,20 T322F127(1)015AS 10.0 8
150.0 F 5,10,20 T322F157(1)015AS 10.0 8
20 VOLT RATING AT 85°C — 13 VOLT RATING AT 125°C
1.0 A 5,10,20 T322A105(1)020AS 0.5 4
1.2 A 5,10,20 T322A125(1)020AS 0.5 4
1.5 A 5 T322A155J020AS 0.5 4
1.5 A 10 T322A155K020AS 0.5 4 CX05J155K T323A155K020AS
1.5 A 20 T322A155M020AS 0.5 4 CX05J155M T323A155M020AS
1.8 B 5,10,20 T322B185(1)020AS 0.5 4
2.2 B 5,10,20 T322B225(1)020AS 0.5 4
2.7 B 5,10,20 T322B275(1)020AS 0.5 4
3.3 B 5,10,20 T322B335(1)020AS 0.5 4
3.9 B 5,10,20 T322B395(1)020AS 0.6 4
4.7 B 5 T322B475J020AS 0.8 4
4.7 B 10 T322B475K020AS 0.8 4 CX05J475K T323B475K020AS
4.7 B 20 T322B475M020AS 0.8 4 CX05J475M T323B475M020AS
5.6 C 5,10,20 T322C565(1)020AS 0.9 4
6.8 C 5,10,20 T322C685(1)020AS 1.1 6
8.2 C 5,10,20 T322C825(1)020AS 1.3 6
10.0 C 5,10,20 T322C106(1)020AS 1.6 6
12.0 D 5 T322D126J020AS 1.9 6
12.0 D 10 T322D126K020AS 1.9 6 CX05J126K T323D126K020AS
12.0 D 20 T322D126M020AS 1.9 6 CX05J126M T323D126M020AS
15.0 D 5 T322D156J020AS 2.4 6
15.0 D 10 T322D156K020AS 2.4 6 CX05J156K T323D156K020AS
15.0 D 20 T322D156M020AS 2.4 6 CX05J156M T323D156M020AS
18.0 D 5,10,20 T322D186(1)020AS 2.9 6
22.0 D 5,10,20 T322D226(1)020AS 3.5 6
27.0 E 5,10,20 T322E276(1)020AS 4.3 6
33.0 E 5,10,20 T322E336(1)020AS 5.0 6
39.0 E 5,10,20 T322E396(1)020AS 6.2 6
47.0 E 5,10,20 T322E476(1)020AS 7.5 6
56.0 E 5,10,20 T322E566(1)020AS 8.9 6
68.0 E 5,10,20 T322E686(1)020AS 10.0 6
82.0 F 5,10,20 T322F826(1)020AS 10.0 8
100.0 F 5,10,20 T322F107(1)020AS 10.0 8
25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C
0.47 A 5,10,20 T322A474(1)025AS 0.5 3
0.56 A 5,10,20 T322A564(1)025AS 0.5 3
0.68 A 5,10,20 T322A684(1)025AS 0.5 3
0.82 A 5,10,20 T322A824(1)025AS 0.5 3
1.0 A 5 T322A105J025AS 0.5 3
1.0 A 10 T322A105K025AS 0.5 3 CX05K105K T323A105K025AS
1.0 A 20 T322A105M025AS 0.5 3 CX05K105M T323A105M025AS
1.2 B 5,10,20 T322B125(1)025AS 0.5 3
1.5 B 5 T322B155J025AS 0.5 3
1.5 B 10 T322B155K025AS 0.5 3 CX01K155K T323B155K025AS
1.5 B 20 T322B155M025AS 0.5 3 CX01K155M T323B155M020AS
1.8 B 5 T322B185J025AS 0.5 3
1.8 B 10 T322B185K025AS 0.5 3 CX01K185K T323B185K025AS
1.8 B 20 T322B185M025AS 0.5 3 CX01K185M T323B185M025AS
2.2 B 5 T322B225J025AS 0.5 3
2.2 B 10 T322B225K025AS 0.5 3 CX05K225K T323B225K025AS
TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5
T322 & T323 (CX01 & CX05) SERIES
46 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5%
Bold Face lines indicate preferred part types and values.
CX01 & CXO5 CAPACITORS
PER MIL-PRF-49137/1 & 5
KEMET T322 SERIES
MAX.
DISSIPATION
CAPACITANCE D.C. FACTOR
CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET
µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER
25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C (Cont’d)
2.2 B 20 T322B225M025AS 0.5 3 CX01/5K225M T323B225M025AS
2.7 B 5,10,20 T322B275(1)025AS 0.5 3
3.3 B 5 T322B335J025AS 0.7 3
3.3 B 10 T322B335K025AS 0.7 3 CX05K335K T323B335K025AS
3.3 B 20 T322B335M025AS 0.7 3 CX05K335M T323B335M025AS
3.9 C 5,10,20 T322C395(1)025AS 0.8 3
4.7 C 5,10,20 T322C475(1)025AS 0.9 4
5.6 C 5,10,20 T322C565(1)025AS 1.1 4
6.8 C 5 T322C685J025AS 1.4 4
6.8 C 10 T322C685K025AS 1.4 4 CX05K685K T323C685K025AS
6.8 C 20 T322C685M025AS 1.4 4 CX05K685M T323C685M025AS
8.2 C 5,10,20 T322C825(1)025AS 1.5 4
10.0 C 5 T322C106J025AS 1.5 4
10.0 C 10 T322C106K025AS 1.5 4 CX05K106K T323C106K025AS
10.0 C 20 T322C106M025AS 1.5 4 CX05K106M T323C106M025AS
12.0 D 5,10,20 T322D126(1)025AS 2.4 4
15.0 D 5,10,20 T322D156(1)025AS 3.0 4
18.0 E 5,10,20 T322E186(1)025AS 3.6 6
22.0 E 5,10,20 T322E226(1)025AS 4.4 6
27.0 E 5,10,20 T322E276(1)025AS 5.4 6
33.0 E 5,10,20 T322E336(1)025AS 6.6 6
39.0 E 5,10,20 T322E396(1)025AS 7.8 6
47.0 E 5,10,20 T322E476(1)025AS 9.4 6
56.0 F 5,10,20 T322F566(1)025AS 10.0 6
68.0 F 5,10,20 T322F686(1)025AS 10.0 6
35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C
0.1 A 5,10,20 T322A104(1)035AS 0.5 3
0.12 A 5,10,20 T322A124(1)035AS 0.5 3
0.15 A 5,10,20 T322A154(1)035AS 0.5 3
0.18 A 5,10,20 T322A184(1)035AS 0.5 3
0.22 A 5,10,20 T322A224(1)035AS 0.5 3
0.27 A 5,10,20 T322A274(1)035AS 0.5 3
0.33 A 5 T322A334J035AS 0.5 3
0.33 A 10 T322A334K035AS 0.5 3 CX05M334K T323A334K035AS
0.33 A 20 T322A334M035AS 0.5 3 CX05M334M T323A334M035AS
0.39 A 5,10,20 T322A394(1)035AS 0.5 3
0.47 A 5 T322A474J035AS 0.5 3
0.47 A 10 T322A474K035AS 0.5 3 CX05M474K T323A474K035AS
0.47 A 20 T322A474M035AS 0.5 3 CX05M474M T323A474M035AS
0.56 B 5 T322B564J035AS 0.5 3
0.56 B 10 T322B564K035AS 0.5 3 CX01M564K T323B564K035AS
0.56 B 20 T322B564M035AS 0.5 3 CX01M564M T323B564M035AS
0.68 B 5 T322B684J035AS 0.5 3
0.68 B 10 T322B684K035AS 0.5 3 CX01M684K T323B684K035AS
0.68 B 20 T322B684M035AS 0.5 3 CX01M684M T323B684M035AS
0.82 B 5 T322B824J035AS 0.5 3
0.82 B 10 T322B824K035AS 0.5 3 CX01M824K T323B824K035AS
0.82 B 20 T322B824M035AS 0.5 3 CX01M824M T323B824M035AS
1.0 B 5 T322B105J035AS 0.5 3
1.0 B 10 T322B105K035AS 0.5 3 CX01M105K T323B105K035AS
1.0 B 20 T322B105M035AS 0.5 3 CX01M105M T323B105M035AS
1.2 B 5 T322B125J035AS 0.5 3
1.2 B 10 T322B125K035AS 0.5 3 CX01M125K T323B125K035AS
1.2 B 20 T322B125M035AS 0.5 3 CX01M125M T323B125M035AS
1.5 B 5 T322B155J035AS 0.5 3
1.5 B 10 T322B155K035AS 0.5 3 CX05M155K T323B155K035AS
1.5 B 20 T322B155M035AS 0.5 3 CX05M155M T323B155M035AS
1.8 C 5,10,20 T322C185(1)035AS 0.5 3
2.2 C 5,10,20 T322C225(1)035AS 0.6 3
2.7 C 5,10,20 T322C275(1)035AS 0.8 3
3.3 C 5 T322C335J035AS 0.9 4
3.3 C 10 T322C335K035AS 0.9 4 CX05M335K T323C335K035AS
3.3 C 20 T322C335M035AS 0.9 4 CX05M335M T323C335M035AS
3.9 C 5 T322C395J035AS 1.1 4
3.9 C 10 T322C395K035AS 1.1 4 CX05M395K T323C395K035AS
3.9 C 20 T322C395M035AS 1.1 4 CX05M395M T323C395M035AS
4.7 C 5 T322C475J035AS 1.3 4
4.7 C 10 T322C475K035AS 1.3 4 CX05M475K T323C475K035AS
4.7 C 20 T322C475M035AS 1.3 4 CX05M475M T323C475M035AS
TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5
T322 & T323 (CX01 & CX05) SERIES
T322/T323 Series Tantalum
Molded / Axial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 47
CX01 & CXO5 CAPACITORS
PER MIL-PRF-49137/1 & 5
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5%
Bold Face lines indicate preferred part types and values.
KEMET T322 SERIES
MAX.
DISSIPATION
CAPACITANCE D.C. FACTOR
CAPACITANCE CASE TOLERANCE KEMET LEAKAGE %@25°C, MILITARY KEMET
µF SIZE ±% PART NUMBER µA@25°C 120 HZ PART NUMBER PART NUMBER
35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C
5.6 D 5,10,20 T322D565(1)035AS 1.6 4
6.8 D 5 T322D685J035AS 1.9 4
6.8 D 10 T322D685K035AS 1.9 4 CX05M685K T323D685K035AS
6.8 D 20 T322D685M035AS 1.9 4 CX05M685M T323D685M035AS
8.2 D 5,10,20 T322D825(1)035AS 2.3 4
10.0 D 5 T322D106J035AS 2.8 4
10.0 D 10 T322D106K035AS 2.8 4 CX05M106K T323D106K035AS
10.0 D 20 T322D106M035AS 2.8 4 CX05M106M T323D106M035AS
12.0 E 5,10,20 T322E126(1)035AS 3.3 4
15.0 E 5,10,20 T322E156(1)035AS 4.2 6
18.0 E 5,10,20 T322E186(1)035AS 5.0 6
22.0 E 5,10,20 T322E226(1)035AS 6.2 6
27.0 E 5,10,20 T322E276(1)035AS 7.5 6
33.0 E 5,10,20 T322E336(1)035AS 9.2 6
39.0 F 5,10,20 T322F396(1)035AS 10.0 6
47.0 F 5,10,20 T322F476(1)035AS 10.0 6
50 VOLT RATING AT 85°C — 33 VOLT RATING AT 125°C
0.1 A 5 T322A104J050AS 0.5 3
0.1 A 10 T322A104K050AS 0.5 3 CX05N104K T323A104K050AS
0.1 A 20 T322A104M050AS 0.5 3 CX05N104M T323A104M050AS
0.12 A 5,10,20 T322A124(1)050AS 0.5 3
0.15 A 5 T322A154J050AS 0.5 3
0.15 A 10 T322A154K050AS 0.5 3 CX05N154K T323A154K050AS
0.15 A 20 T322A154M050AS 0.5 3 CX05N154M T323A154M050AS
0.18 A 5,10,20 T322A184(1)050AS 0.5 3
0.22 A 5 T322A224J050AS 0.5 3
0.22 A 10 T322A224K050AS 0.5 3 CX05N224K T323A224K050AS
0.22 A 20 T322A224M050AS 0.5 3 CX05N224M T323A224M050AS
0.27 A 5,10,20 T322A274(1)050AS 0.5 3
0.33 B 5 T322B334J050AS 0.5 3
0.33 B 10 T322B334K050AS 0.5 3 CX05N334K T323B334K050AS
0.33 B 20 T322B334M050AS 0.5 3 CX05N334M T323B334M050AS
0.39 B 5 T322B394J050AS 0.5 3
0.39 B 10 T322B394K050AS 0.5 3 CX05N394K T323B394K050AS
0.39 B 20 T322B394M050AS 0.5 3 CX05N394M T323B394M050AS
0.47 B 5 T322B474J050AS 0.5 3
0.47 B 10 T322B474K050AS 0.5 3 CX05N474K T323B474K050AS
0.47 B 20 T322B474M050AS 0.5 3 CX05N474M T323B474M050AS
0.56 B 5,10,20 T322B564(1)050AS 0.5 3
0.68 B 5 T322B684J050AS 0.5 3
0.68 B 10 T322B684K050AS 0.5 3 CX05N684K T323B684K050AS
0.68 B 20 T322B684M050AS 0.5 3 CX05N684M T323B684M050AS
0.82 B 5,10,20 T322B824(1)050AS 0.5 3
1.0 B 5 T322B105J050AS 0.5 3
1.0 B 10 T322B105K050AS 0.5 3 CX05N105K T323B105K050AS
1.0 B 20 T322B105M050AS 0.5 3 CX05N105M T323B105M050AS
1.2 C 5,10,20 T322C125(1)050AS 0.5 3
1.5 C 5 T322C155J050AS 0.6 4
1.5 C 10 T322C155K050AS 0.6 4 CX05N155K T323C155K050AS
1.5 C 20 T322C155M050AS 0.6 4 CX05N155M T323C155M050AS
1.8 C 5,10,20 T322C185(1)050AS 0.7 4
2.2 C 5 T322C225J050AS 0.9 4
2.2 C 10 T322C225K050AS 0.9 4 CX05N225K T323C225K050AS
2.2 C 20 T322C225M050AS 0.9 4 CX05N225M T323C225M050AS
2.7 D 5,10,20 T322D275(1)050AS 1.1 4
3.3 D 5 T322D335J050AS 1.3 4
3.3 D 10 T322D335K050AS 1.3 4 CX05N335K T323D335K050AS
3.3 D 20 T322D335M050AS 1.3 4 CX05N335M T323D335M050AS
3.9 D 5,10,20 T322D395(1)050AS 1.6 4
4.7 D 5 T322D475J050AS 1.9 4
4.7 D 10 T322D475K050AS 1.9 4 CX05N475K T323D475K050AS
4.7 D 20 T322D475M050AS 1.9 4 CX05N475M T323D475M050AS
5.6 E 5,10,20 T322E565(1)050AS 2.2 4
6.8 E 5,10,20 T322E685(1)050AS 2.7 4
8.2 E 5,10,20 T322E825(1)050AS 3.2 4
10.0 E 5,10,20 T322E106(1)050AS 4.0 6
12.0 F 5,10,20 T322F126(1)050AS 4.8 6
15.0 F 5,10,20 T322F156(1)050AS 6.0 6
18.0 F 5,10,20 T322F186(1)050AS 7.2 6
22.0 F 5,10,20 T322F226(1)050AS 8.8 6
TANTALUM MOLDED / AXIAL — MIL-PRF-49137/1 & 5
T322 & T323 (CX01 & CX05) SERIES
48 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
CX01 & CXO5 CAPACITORS
PER MIL-PRF-49137/1 & 5
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert Capacitance Tolerance Symbol as follows: M — ±20%, K — ±10%, J — ±5%
Bold Face lines indicate preferred part types and values.
TANTALUM MOLDED / RADIAL
T330/T340 SERIES - PRECISION MOLDED — RADIAL LEAD — POLAR TYPE
T330/T340 Series Tantalum
Molded / Radial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 49
T330 Series
KEMET T330 Series, polar-type, radial lead rectangular Precision
Molded Tantalum (PMT) capacitors are primarily designed for appli-
cations that demand full use of the premium space available in print-
ed circuitry and high density packaging. Compact, space saving
T330 Series capacitors provide superior packing factor and space
utilization compared with tubular units of the same microcoulomb
(CV) rating.
T330 Series capacitors employ a rectangular sintered, dry tantalum
anode, transfer molded in precision dies with a high impact resistant
plastic having excellent electrical, physical, and moisture resistant
properties. All cases utilize gold color plastic which permits laser
marking with outstanding permanency and legibility. The polarity is
indicated by a + sign permanently marked on the case. The radius on
the two vertical edges at the positive end of B, C, and D Cases can
be used as a sensing dimension for automatic insertion processes.
The location of the standoffs may serve a similar sensing function for
the A Case. These standoffs, located in the base of all case sizes,
provide vents for air circulation and also allow easy removal of flux
residues from leadwire and circuit board solder joints.
T330 Series capacitors are highly reliable and exhibit performance
characteristics typical of military test standards. They are available
in capacitance values ranging from 0.1 to 220 microfarads in ±20,
±10, ±5% tolerance levels, and in working voltages from 6 to 50
volts. At 85°C the capacitors will operate continuously at full rated
voltage. They are rated to 125°C when operated at 2/3 of nameplate
voltage. In addition, they feature exceptionally low DC leakage and
Dissipation Factor characteristics.
They are ideal for bypass, coupling, and timing applications in com-
puters, military ordinance, industrial, entertainment, and consumer
electronic equipment.
•CAPACITANCE/VOLTAGE RANGE:
T330: 0.1-220µF, 6-50 Volts.
T340: 0.1-330µF, 6-50 Volts.
•CAPACITANCE TOLERANCE: Available in standard EIA nominal
values with ±20% tolerance standard, ±10% and ±5% available
on special order.
•DISSIPATION FACTOR: Maximum DF limits are shown in corre-
sponding series part number listing. See Application Notes
Section, page 78.
•DC LEAKAGE CURRENT: Maximum leakage values at 25°C are
shown in part number listings, pages 51, 52, 55, 56 and 57. See
Application Notes Section, page 76.
•RATED VOLTAGE; WORKING VOLTAGE; SURGE VOLTAGE;
REVERSE VOLTAGE: See Application Notes Section, pages 76 &
77 for description.
•IMPEDANCE and ESR: See Application Notes Section, page 77
& 78 for additional information. Reference ESR values are shown
in table below.
•AC RIPPLE VOLTAGE: Permissible AC ripple voltage is related to
ESR of the capacitor and the power dissipation capabilities of a par-
ticular case size. Thermal capacities for the various case sizes
have been determined and are listed in Table below. For addi-
tional description see page 78.
•ENVIRONMENTAL CONSIDERATIONS:
A. Shock Test: MIL-STD-202, Method 213.
B. Thermal Shock, MIL-STD-202, Method 107.
C. Moisture Resistance: MIL-STD-202, Method 106.
D. Solderability: MIL-STD-202, Method 208.
For additional Environmental Test Information see pages 80, 81
and 82.
•LEAD MATERIAL: Solder coated steel core with copper ply per
MIL-STD-1276.
•LEAD TAPE and REEL: Reeling per specification RS-468. See
pages 71 and 73 for additional information.
PERFORMANCE CHARACTERISTICS
T340 Series
The compact space saving T340 Series is transfer molded in preci-
sion dies with a high impact resistant plastic having excellent elec-
trical, physical, and moisture resistant properties. The gold color
plastic case utilized permits laser marking with outstanding perma-
nency and legibility.
Marking is provided on the top of the case to allow visual inspection
for proper polarity and placement after insertion. In addition, positive
polarity identification is achieved by an easily recognized molded
radius on the positive end of the case. This physical polarity identifi-
cation is readily observed after capacitor placement as a further aid
to the top marking in prevention of possible reverse insertion.
Standoffs, located in the base of all case sizes, provide vents for air
circulation and also allow easy removal of flux residues from lead-
wire and circuit board solder joints. With very low impedance and
ESR values, the T340 Series features exceptionally low DC leakage
and DF characteristics. The T340 Series is available in standard
±20%; ±10%; ±5% (special order) capacitance tolerance.
T340 Series capacitors are highly reliable and exhibit performance
characteristics typical of military test standards.
Series Case Size Watts
T330/T340 A .09
B .09
C.100
T330 D .125
T340 only D/F .125
E.180
Maximum Power Dissipation: 25°C Ambient
T330/T340 ESR (OHMS) at 100 kHz @ +25°C
(The ESR values provided below are for reference only.
No warranty, as stated on page 3 and reincorporated here,is made as to
the accuracy of these values for any particular T330/T340 Series product.)
0.10
0.15
0.22
0.33
0.47
0.68
1.00
1.50
2.20
3.30
4.70
6.80
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
220.0
330.0
8.0
6.0
5.0
3.7
3.0
2.0
1.8
1.6
0.9
0.9
0.7
8.0
6.0
5.0
3.7
2.7
2.1
1.7
1.3
1.0
0.8
0.6
6.0
5.0
4.0
3.2
2.5
2.0
1.6
1.3
1.0
0.8
0.6
7.0
5.5
4.5
3.6
2.9
2.3
1.8
1.4
1.2
0.9
0.6
8.0
6.0
5.0
4.0
3.1
2.5
2.0
1.5
1.2
1.0
0.8
26.0
21.0
17.0
15.0
13.0
10.0
8.0
6.0
5.0
4.0
3.0
2.5
2.0
1.6
1.3
1.0
0.8
26.0
21.0
17.0
15.0
13.0
10.0
8.0
5.0
3.5
3.0
2.5
2.0
1.6
1.2
1.0
Cap.
µF6
Volt 10
Volt 15
Volt 20
Volt 25
Volt 35
Volt 50
Volt
TANTALUM MOLDED / RADIAL
T330 SERIES - PRECISION MOLDED - RADIAL LEAD
50 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
CAPACITOR OUTLINE DRAWINGS
A CASE
E
W
H
T
.500±.125
(12.7±.3.18)
.025±.001
(.64±.03)
W
H
B, C, & D CASES
S
T
.050R±.005
(1.27R±.13)
E
Note:
On the "B" case size the
stand off appears only
between the two leadss
.500±.125
(12.7±.3.18)
S
.020±.001
(.51±.03)
.015±.005
(.38±.13)
(Stand Off)
.150±.005
(.38±.13)
(Stand Off)
DIMENSIONS — INCHES & (MILLIMETERS)
CASE H W T E S
SIZE CASE HEIGHT CASE WIDTH CASE THICKNESS CASE TO WIRE LEAD SPACING
A .345 ± .008 .230 ± .005 .105 ± .005 .050 ± .010 .125 ± .005
(8.76 ± .203) (5.84 ± .127) (2.67 ± .127) (1.27 ± .25) (3.18 ± .127)
B .225 ± .015 .285 ± .015 .170 ± .015 .042 ± .010 .200 ± .005
(5.71 ± 0.38) (7.24 ± 0.38) (4.32 ± 0.38) (1.07 ± .25) (5.08 ± .127)
C .325 ± .015 .325 ± .015 .170 ± .015 .062 ± .010 .200 ± .005
(8.26 ± 0.38) (8.26 ± 0.38) (4.32 ± 0.38) (1.57 ± 0.25) (5.08 ± .127)
D .375 ± .015 .600 ± .015 .195 ± .015 .200 ± .010 .200 ± .005
(9.53 ± 0.38) (15.24 ± 0.38) (4.95 ± 0.38) (5.08 ± 0.25) (5.08 ± .127)
ORDERING INFORMATION
T 330 B 104 M 035 A S*
TANTALUM
SERIES
Radial Lead
Precision Molded Polar
Solid Tantalum
CASE SIZE
A / B / C / D
PICOFARAD CODE
First two digits are significant figures.
Third digit is the number of zeros following.
LEAD MATERIAL
S — Standard (Solder-Coated Nickel)
FAILURE RATE LEVEL
A— Not Applicable
VOLTAGE RATING
CAP. TOLERANCE
M — ±20% — Std.
K — ±10% — Std. J — ±5% — Available on
request
MARKING INFORMATION
4.7K
25K+
Capacitance
Tolerance:
5% - J
10% - K
20% - Standard (no mark)
Polarity
KEMET Trademark
Voltage Rating
*Part Number Example: T330B104M035AS (14 digits – no spaces)
MAX.
DISSIPATION
CAPAC- D.C. FACTOR
ITANCE CASE LEAKAGE %@25°C,
µF SIZE KEMET PART NUMBER µA@25°C 120Hz
10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C
33.0 C T330C336(1)010AS 2 6
39.0 C T330C396(1)010AS 5 6
47.0 D T330D476(1)010AS 5 6
56.0 D T330D566(1)010AS 5 6
68.0 D T330D686(1)010AS 5 6
82.0 D T330D826(1)010AS 5 6
100.0 D T330D107(1)010AS 10 6
120.0 D T330D127(1)010AS 10 6
150.0 D T330D157(1)010AS 10 6
15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C
3.9 B T330B395(1)015AS 1 6
4.7 B T330B475(1)015AS 1 6
5.6 B T330B565(1)015AS 1 6
6.8 B T330B685(1)015AS 1 6
8.2 B T330B825(1)015AS 1 6
10.0 C T330C106(1)015AS 1 6
12.0 C T330C126(1)015AS 1 6
15.0 C T330C156(1)015AS 2 6
18.0 C T330C186(1)015AS 5 6
22.0 C T330C226(1)015AS 5 6
27.0 C T330C276(1)015AS 5 6
33.0 C T330C336(1)015AS 5 6
39.0 D T330D396(1)015AS 10 6
47.0 D T330D476(1)015AS 10 6
56.0 D T330D566(1)015AS 10 6
68.0 D T330D686(1)015AS 10 6
82.0 D T330D826(1)015AS 10 6
MAX.
DISSIPATION
CAPAC- D.C. FACTOR
ITANCE CASE LEAKAGE %@25°C,
µF SIZE KEMET PART NUMBER µA@25°C 120Hz
6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C
10.0 B T330B106(1)006AS 1 6
12.0 B T330B126(1)006AS 1 6
15.0 B T330B156(1)006AS 1 6
18.0 B T330B186(1)006AS 1 6
22.0 B T330B226(1)006AS 1 6
27.0 C T330C276(1)006AS 1 6
33.0 C T330C336(1)006AS 1 6
39.0 C T330C396(1)006AS 1 6
47.0 C T330C476(1)006AS 2 6
56.0 C T330C566(1)006AS 5 6
68.0 C T330C686(1)006AS 5 6
82.0 D T330D826(1)006AS 5 6
100.0 D T330D107(1)006AS 5 6
120.0 D T330D127(1)006AS 5 6
150.0 D T330D157(1)006AS 5 6
180.0 D T330D187(1)006AS 10 6
220.0 D T330D227(1)006AS 10 8
10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C
5.6 B T330B565(1)010AS 1 6
6.8 B T330B685(1)010AS 1 6
8.2 B T330B825(1)010AS 1 6
10.0 B T330B106(1)010AS 1 6
12.0 B T330B126(1)010AS 1 6
15.0 B T330B156(1)010AS 1 6
18.0 C T330C186(1)010AS 1 6
22.0 C T330C226(1)010AS 2 6
27.0 C T330C276(1)010AS 2 6
MAX.
DISSIPATION
CAPAC- D.C. FACTOR
ITANCE CASE LEAKAGE %@25°C,
µF SIZE KEMET PART NUMBER µA@25°C 120Hz
35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C
0.39 A T330A394(1)035AS 1 3
0.47 A T330A474(1)035AS 1 3
0.56 A T330A564(1)035AS 1 3
0.68 A T330A684(1)035AS 1 3
0.82 A T330A824(1)035AS 1 3
1.0 A T330A105(1)035AS 1 3
1.2 A T330A125(1)035AS 1 4
1.5 A T330A155(1)035AS 1 4
1.8 A T330A185(1)035AS 1 4
2.2 A T330A225(1)035AS 1 4
2.7 A T330A275(1)035AS 1 4
50 VOLT RATING AT 85°C — 33 VOLT RATING AT 125°C
0.10 A T330A104(1)050AS 1 3
0.12 A T330A124(1)050AS 1 3
0.15 A T330A154(1)050AS 1 3
0.18 A T330A184(1)050AS 1 3
0.22 A T330A224(1)050AS 1 3
0.27 A T330A274(1)050AS 1 3
0.33 A T330A334(1)050AS 1 3
0.39 A T330A394(1)050AS 1 3
0.47 A T330A474(1)050AS 1 3
0.56 A T330A564(1)050AS 1 3
0.68 A T330A684(1)050AS 1 3
0.82 A T330A824(1)050AS 1 4
1.0 A T330A105(1)050AS 1 4
1.2 A T330A125(1)050AS 1 4
1.5 A T330A155(1)050AS 1 4
MAX.
DISSIPATION
CAPAC- D.C. FACTOR
ITANCE CASE LEAKAGE %@25°C,
µF SIZE KEMET PART NUMBER µA@25°C 120Hz
6 VOLT RATING AT 85°C — 4 VOLT RATING AT 125°C
18.0 A T330A186(1)006AS 1 6
22.0 A T330A226(1)006AS 1 6
10 VOLT RATING AT 85°C — 7 VOLT RATING AT 125°C
10.0 A T330A106(1)010AS 1 6
12.0 A T330A126(1)010AS 1 6
15.0 A T330A156(1)010AS 1 6
15 VOLT RATING AT 85°C — 10 VOLT RATING AT 125°C
8.2 A T330A825(1)015AS 1 6
20 VOLT RATING AT 85°C — 13 VOLT RATING AT 125°C
5.6 A T330A565(1)020AS 1 6
6.8 A T330A685(1)020AS 1 6
25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C
3.3 A T330A335(1)025AS 1 4
3.9 A T330A395(1)025AS 1 4
4.7 A T330A475(1)025AS 1
35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C
0.10 A T330A104(1)035AS 1 3
0.12 A T330A124(1)035AS 1 3
0.15 A T330A154(1)035AS 1 3
0.18 A T330A184(1)035AS 1 3
0.22 A T330A224(1)035AS 1 3
0.27 A T330A274(1)035AS 1 3
0.33 A T330A334(1)035AS 1 3
TANTALUM MOLDED / RADIAL
T330 SERIES - PRECISION MOLDED - RADIAL LEAD
T330 Series Tantalum
Molded / Radial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 51
RATINGS & PART NUMBER REFERENCE
A CASE
B, C & D CASES
(1) To complete Part Number insert Capacitance Tolerance Symbol in the 9th character, M — ±20%, K — ±10%, J — ±5%.
Bold face lines indicate popular part types and values.
Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.
MAX.
DISSIPATION
CAPAC- D.C. FACTOR
ITANCE CASE LEAKAGE %@25°C,
µF SIZE KEMET PART NUMBER µA@25°C 120Hz
35 VOLT RATING AT 85°C — 23 VOLT RATING AT 125°C
6.8 C T330C685(1)035AS 2 6
8.2 C T330C825(1)035AS 5 6
10.0 C T330C106(1)035AS 5 6
12.0 D T330D126(1)035AS 5 6
15.0 D T330D156(1)035AS 5 6
18.0 D T330D186(1)035AS 10 6
22.0 D T330D226(1)035AS 10 6
27.0 D T330D276(1)035AS 10 6
33.0 D T330D336(1)035AS 10 6
50 VOLT RATING AT 85°C—33 VOLT RATING AT 125°C
0.10 B T330B104(1)050AS 1 6
0.12 B T330B124(1)050AS 1 6
0.15 B T330B154(1)050AS 1 6
0.18 B T330B184(1)050AS 1 6
0.22 B T330B224(1)050AS 1 6
0.27 B T330B274(1)050AS 1 6
0.33 B T330B334(1)050AS 1 6
0.39 B T330B394(1)050AS 1 6
0.47 B T330B474(1)050AS 1 6
0.56 B T330B564(1)050AS 1 6
0.68 B T330B684(1)050AS 1 6
0.82 B T330B824(1)050AS 1 6
1.0 B T330B105(1)050AS 1 6
1.2 B T330B125(1)050AS 1 6
1.5 B T330B155(1)050AS 1 6
1.8 B T330B185(1)050AS 1 6
2.2 B T330B225(1)050AS 1 6
2.7 C T330C275(1)050AS 1 6
3.3 C T330C335(1)050AS 2 6
3.9 C T330C395(1)050AS 5 6
4.7 C T330C475(1)050AS 5 6
5.6 C T330C565(1)050AS 5 6
6.8 D T330D685(1)050AS 5 6
8.2 D T330D825(1)050AS 5 6
10.0 D T330D106(1)050AS 5 6
12.0 D T330D126(1)050AS 5 6
15.0 D T330D156(1)050AS 10 6
18.0 D T330D186(1)050AS 10 6
MAX.
DISSIPATION
CAPAC- D.C. FACTOR
ITANCE CASE LEAKAGE %@25°C,
µF SIZE KEMET PART NUMBER µA@25°C 120Hz
25 VOLT RATING AT 85°C — 17 VOLT RATING AT 125°C
2.7 B T330B275(1)025AS 1 6
3.3 B T330B335(1)025AS 1 6
3.9 B T330B395(1)025AS 1 6
4.7 B T330B475(1)025AS 1 6
5.6 C T330C565(1)025AS 1 6
6.8 C T330C685(1)025AS 1 6
8.2 C T330C825(1)025AS 1 6
10.0 C T330C106(1)025AS 1 6
12.0 C T330C126(1)025AS 1 6
15.0 C T330C156(1)025AS 2 6
18.0 D T330D186(1)025AS 5 6
22.0 D T330D226(1)025AS 5 6
27.0 D T330D276(1)025AS 5 6
33.0 D T330D336(1)025AS 5 6
39.0 D T330D396(1)025AS 10 6
47.0 D T330D476(1)025AS 10 6
35 VOLT RATING AT 85°C—23 VOLT RATING AT 125°C
0.10 B T330B104(1)035AS 1 6
0.12 B T330B124(1)035AS 1 6
0.15 B T330B154(1)035AS 1 6
0.18 B T330B184(1)035AS 1 6
0.22 B T330B224(1)035AS 1 6
0.27 B T330B274(1)035AS 1 6
0.33 B T330B334(1)035AS 1 6
0.39 B T330B394(1)035AS 1 6
0.47 B T330B474(1)035AS 1 6
0.56 B T330B564(1)035AS 1 6
0.68 B T330B684(1)035AS 1 6
0.82 B T330B824(1)035AS 1 6
1.0 B T330B105(1)035AS 1 6
1.2 B T330B125(1)035AS 1 6
1.5 B T330B155(1)035AS 1 6
1.8 B T330B185(1)035AS 1 6
2.2 B T330B225(1)035AS 1 6
2.7 B T330B275(1)035AS 1 6
3.3 B T330B335(1)035AS 1 6
3.9 C T330C395(1)035AS 1 6
4.7 C T330C475(1)035AS 1 6
5.6 C T330C565(1)035AS 1 6
TANTALUM MOLDED / RADIAL
T330 SERIES - PRECISION MOLDED - RADIAL LEADS
52 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
B, C & D CASES (Cont’d)
(1) To complete Part Number insert Capacitance Tolerance Symbol in the 9th character, M — ±20%, K — ±10%, J — ±5%.
Bold face lines indicate popular part types and values.
Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.
TANTALUM MOLDED / RADIAL
T340 SERIES - PRECISION MOLDED - RADIAL LEADS
T340 Series Tantalum
Molded / Radial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 53
H** W T LEAD SPACING LEAD LENGTH LEAD DIAMETER
CASE (MAX) (MAX) (MAX) S L D
SIZE H W T Inches mm Inches mm Inches mm
Inches mm Inches mm inches mm ±.020 ±.5 ±.078 ±2.0 ±.001 ±.03
A.287 7.3 .185 4.7 .165 4.2 .100 2.5 .600 15.0 .020 0.50
B.327 8.3 .283 7.2 .157 4.0 .200 5.0 .600 15.0 .020 0.50
C.413 10.5 .287 7.3 .169 4.3 .200 5.0 .600 15.0 .020 0.50
D.413 10.5 .484 12.3 .287 7.3 .400 10.0 .600 15.0 .025 0.64
E.413 10.5 .484 12.3 .484 12.3 .400 10.0 .600 15.0 .025 0.64
F.413 10.5 .484 12.3 .287 7.3 .200 5.0 .600 15.0 .025 0.64
CAPACITOR OUTLINE DRAWINGS
DIMENSIONS — INCHES & MILLIMETERS
**Includes Standoff Height of .015 ± .005” (.38 ± .13 mm) for All Case Sizes.
ORDERING INFORMATION
T340A105M035AS*
TANTALUM
SERIES
Radial Lead
Precision Molded Polar
Solid Tantalum
CASE SIZE
A / B / C / D / E / F
PICOFARAD CODE
First two digits are significant figures.
Third digit is the number of zeros following.
LEAD MATERIAL
S — Standard
(solder-coated copperweld)
FAILURE RATE LEVEL
A — Not Applicable
VOLTAGE RATING
CAPACITANCE
TOLERANCE
M — ±20% — Std.
K — ±10%
J— ±5% Available on
request
}
*Part Number Example: T340A105M035AS (14 digits – no spaces)
F case size is the same as D, but with .200" (5.0 mm) lead spacing. Specify T340F when ordering this spacing.
TOP
A Case
T
T
T
T
T
B Case C Case D or F Case E CaseA Case
S
SIDE
SSS
S
D
DD L
H
L
H
L
H
WW
L
H
L
H
L
H
WW
W
D D
Effective September 30, 2005, the KEMET T340 Series is RoHS compliant.
T – 100% tin
TANTALUM MOLDED / RADIAL
T340 SERIES
54 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
MARKING INFORMATION
Insert Date Code as follows:
= DIN. Specification Date Code
1st digit - represents year
Q - 2005
R - 2006
S - 2007
T - 2008
U - 2009
L - 2000
M - 2001
N - 2002
O - 2003
P - 2004
2nd digit - represents month
1 - 9 for January - September
O for October
N for November
D for December
220J
+ 10 K
Polarity Voltage KEMET T rademark
Capacitance
(in Microfarads)
10K
+ 16 K
4.7J
+ 10 K
33K
+ 10 K
A Case B Case C Case D & F Case E Case
47J
+ 16 K
Capacitance Tolerance
±5% - J
±10% - K
±20% - Standard,
(no marking)
European
American
220J
+ 10 K
Polarity Voltage KEMET T rademark
Capacitance
(in Microfarads)
10K
+ 16 K
4.7J
+ 10 K
33K
+ 10 K
A Case B Case C Case D & F Case E Case
47J
+ 16 K
Capacitance Tolerance
±5% - J
±10% - K
±20% - Standard,
(no marking)
MAX.
MAX. DISSIPATION MAX.
CAPACI- DC FACTOR IMPEDANCE
ITANCE CASE KEMET LEAKAGE %@25°C, Ω@
µF SIZE PART NUMBER µA@25°C 120 HZ 10 kHz
3 VOLT RATING AT 85°C — 2 VOLT AT 125°C
10.0 A T340A106(1)003AS 1.0 6 6.0
15.0 A T340A156(1)003AS 1.0 6 3.2
33.0 B T340B336(1)003AS 1.5 6 2.1
47.0 B T340B476(1)003AS 3.0 6 1.8
68.0 C T340C686(1)003AS 4.0 6 1.5
100.0 C T340C107(1)003AS 5.0 6 1.2
6/6.3 VOLT RATING AT 85°C — 4 VOLT AT 125°C
6.8 A T340A685(1)006AS 1.0 6 6.0
10.0 B T340B106(1)006AS 1.0 6
12.0 B T340B126(1)006AS 1.0 6
15.0 B T340B156(1)006AS 1.0 6
18.0 B T340B186(1)006AS 1.0 6
22.0 B T340B226(1)006AS 2.5 6 2.1
27.0 C T340C276(1)006AS 2.5 6
33.0 C T340C336(1)006AS 2.5 6
39.0 C T340C396(1)006AS 2.5 6
47.0 C T340C476(1)006AS 3.0 6 1.5
56.0 C T340C566(1)006AS 5.0 6
68.0 C T340C686(1)006AS 5.0 6
82.0 D/F T340(2)826(1)006AS 5.0 6
100.0 D/F T340(2)107(1)006AS 5.0 6
120.0 D/F T340(2)127(1)006AS 5.0 6
150.0 D/F T340(2)157(1)006AS 8.0 6 0.8
180.0 D/F T340(2)187(1)006AS 10.0 6
220.0 D/F T340(2)227(1)006AS 10.0 6
330.0 E T340E337(1)006AS 10.0 8 0.5
10 VOLT RATING AT 85°C — 6 VOLT AT 125°C
4.7 A T340A475(1)010AS 1.0 6 7.5
5.6 B T340B565(1)010AS 1.0 6
6.8 B T340B685(1)010AS 1.0 6
8.2 B T340B825(1)010AS 1.0 6
10.0 B T340B106(1)010AS 1.0 6
12.0 B T340B126(1)010AS 1.0 6
15.0 B T340B156(1)010AS 3.0 6 2.5
18.0 C T340C186(1)010AS 3.0 6
22.0 C T340C226(1)010AS 3.0 6
27.0 C T340C276(1)010AS 3.0 6
33.0 C T340C336(1)010AS 5.0 6 1.7
39.0 C T340C396(1)010AS 5.0 6
47.0 D/F T340(2)476(1)010AS 5.0 6
56.0 D/F T340(2)566(1)010AS 5.0 6
68.0 D/F T340(2)686(1)010AS 5.0 6
82.0 D/F T340(2)826(1)010AS 8.0 6
100.0 D/F T340(2)107(1)010AS 10.0 6 1.0
120.0 D/F T340(2)127(1)010AS 10.0 6
150.0 D/F T340(2)157(1)010AS 10.0 6
220.0 E T340E227(1)010AS 10.0 6 0.5
15/16 VOLT RATING AT 85°C — 10 VOLT AT 125°C
3.3 A T340A335(1)015AS 1.0 6 9.0
3.9 B T340B395(1)015AS 1.0 6
4.7 B T340B475(1)015AS 1.0 6
5.6 B T340B565(1)015AS 1.0 6
6.8 B T340B685(1)015AS 1.0 6
8.2 B T340B825(1)015AS 1.0 6
10.0 B T340B106(1)015AS 3.0 6 3.2
TANTALUM MOLDED / RADIAL
T340 SERIES
T340 Series Tantalum
Molded / Radial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 55
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information.
(2) To complete KEMET Part Number, insert letter “D” for 10.0 mm (.394) lead spacing or letter “F” for 5.0 mm (.197) lead spacing. See page 53 for outline drawings.
Bold face lines indicate popular part types and values.
Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.
TANTALUM MOLDED / RADIAL
T340 SERIES
56 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information.
(2) To complete KEMET Part Number, insert letter “C” for 5.0 mm (.197”) lead spacing, “D” for 10.0 mm (.394”) lead spacing, “E” for 10.0 mm (.394”) lead spacing or “F” for 5.0 mm
(.197”) lead spacing. See page 53 for outline drawings.
Bold face lines indicate popular part types and values.
Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.
MAX.
MAX. DISSIPATION MAX
CAPAC- DC FACTOR IMPEDANCE
ITANCE CASE KEMET LEAKAGE %@25°C, Ω@
µF SIZE PART NUMBER µA@25°C 120 HZ 10 kHz
15/16 VOLT RATING AT 85°C — 10 VOLT AT 125°C (Cont’d)
12.0 C T340C126(1)015AS 3.0 6
15.0 C T340C156(1)015AS 3.5 6 2.5
18.0 C T340C186(1)015AS 4.0 6
22.0 C T340C226(1)015AS 4.0 6 2.1
27.0 C T340C276(1)015AS 5.0 6
33.0 C T340C336(1)015AS 5.0 6
39.0 D/F T340(2)396(1)015AS 7.0 6
47.0 D/F T340(2)476(1)015AS 7.0 6 1.3
56.0 D/F T340(2)566(1)015AS 8.0 6
68.0 D/F T340(2)686(1)015AS 9.0 6 1.1
82.0 D/F T340(2)826(1)015AS 10.0 6
100.0 E T340E107(1)015AS 10.0 6 0.8
150.0 E T340E157(1)015AS 10.0 6 0.6
20 VOLT RATING AT 85°C — 13 VOLT AT 125°C
2.2 A T340A225(1)020AS 1.0 6 12.0
3.3 B T340B335(1)020AS 1.0 6 8.0
4.7 B T340B475(1)020AS 1.5 6 5.5
6.8 B T340B685(1)020AS 2.5 6 4.2
15.0 C T340C156(1)020AS 5.0 6 2.5
47.0 D T340D476(1)020AS 9.0 6 1.3
100.0 E T340E107(1)020AS 10.0 6 0.8
25 VOLT RATING AT 85°C — 16 VOLT AT 125°C
1.5 A T340A155(1)025AS 1.0 6 17.0
2.7 B T340B275(1)025AS 1.0 6
3.3 B T340B335(1)025AS 1.0 6
3.9 B T340B395(1)025AS 1.0 6
4.7 B T340B475(1)025AS 2.0 6 5.5
5.6 C T340C565(1)025AS 2.0 6
6.8 C T340C685(1)025AS 3.0 6 4.2
8.2 C T340C825(1)025AS 3.0 6
10.0 C T340C106(1)025AS 3.5 6 3.0
12.0 C T340C126(1)025AS 3.5 6
15.0 C T340C156(1)025AS 4.0 6
18.0 D/F T340(2)186(1)025AS 5.0 6
22.0 D/F T340(2)226(1)025AS 5.5 6 2.0
27.0 D/F T340(2)276(1)025AS 7.0 6
33.0 D/F T340(2)336(1)025AS 8.0 6 1.5
39.0 D/F T340(2)396(1)025AS 10.0 6
47.0 D/E/F T340(2)476(1)025AS 10.0 6 1.3
68.0 E T340E686(1)025AS 10.0 6 0.9
35 VOLT RATING AT 85°C — 23 VOLT AT 125°C
0.1 A T340A104(1)035AS 1.0 6 220.0
0.15 A T340A154(1)035AS 1.0 6 150.0
0.22 A T340A224(1)035AS 1.0 6 100.0
0.33 A T340A334(1)035AS 1.0 6 75.0
0.47 A T340A474(1)035AS 1.0 6 50.0
0.68 A T340A684(1)035AS 1.0 6 36.0
1.0 A T340A105(1)035AS 1.0 6 25.0
1.2 B T340B125(1)035AS 1.0 6 15.0
1.5 B T340B155(1)035AS 1.0 6
1.8 B T340B185(1)035AS 1.0 6
2.2 B T340B225(1)035AS 1.0 6 11.0
2.7 B T340B275(1)035AS 1.0 6
3.3 B/C T340(2)335(1)035AS 1.0 6 7.5
TANTALUM MOLDED / RADIAL
T340 SERIES
T340 Series Tantalum
Molded / Radial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 57
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET Part Number, insert M — ±20%, K — ±10%, or J — ±5% for capacitance tolerance as shown in T340 ordering information.
(2) To complete KEMET Part Number, insert letter “C” for 5.0 mm (.197”) lead spacing, “D” for 10.0 mm (.394”) lead spacing, “E” for 10.0 mm (.394”) lead spacing or letter “F” for 5.0 mm
(.197”) lead spacing. See page 53 for outline drawings.
Bold face lines indicate popular part types and values.
Higher voltage and better capacitance tolerance product may be substituted for an order within the same case size at KEMET’S option.
MAX.
MAX. DISSIPATION MAX
CAPACI- DC FACTOR IMPEDANCE
ITANCE CASE KEMET LEAKAGE %@25°C, Ω@
µF SIZE PART NUMBER µA@25°C 120 HZ 10 kHz
35 VOLT RATING AT 85°C — 23 VOLT AT 125°C (Cont’d)
3.9 C T340C395(1)035AS 1.0 6
4.7 C T340C475(1)035AS 2.5 6 5.5
5.6 C T340C565(1)035AS 2.5 6
6.8 C T340C685(1)035AS 3.0 6 4.2
8.2 C T340C825(1)035AS 4.0 6
10.0CT340(2)106(1
)035AS 4.062.8
12.0 D/F T340(2
)126(1)035AS 5.0 6
15.0 D/F T340(2)156(1)035AS 5.0 6 2.2
18.0 D/F T340(2)186(1)035AS 8.0 6
22.0 D/F T340(2)226(1)035AS 8.0 6 1.9
27.0 D/F T340(2)276(1)035AS 10.0 6
33.0 D/E/F T340(2)336(1)035AS 10.0 6 1.4
47.0 E T340E476(1)035AS 10.0 6 1.1
40 VOLT RATING AT 85°C — 32 VOLT AT 100°C
0.1 A T340A104(1)040AS 1.0 6 200.0
0.15 A T340A154(1)040AS 1.0 6 140.0
0.22 A T340A224(1)040AS 1.0 6 95.0
0.33 A T340A334(1)040AS 1.0 6 70.0
0.47 A T340A474(1)040AS 1.0 6 46.0
0.68 A T340A684(1)040AS 1.0 6 34.0
1.0 A T340A105(1)040AS 1.0 6 23.0
1.5 B T340B155(1)040AS 1.0 6 14.0
2.2 B T340B225(1)040AS 1.7 6 10.0
3.3 C T340C335(1)040AS 2.3 6 7.0
4.7 C T340C475(1)040AS 3.0 6 5.0
6.8 C T340C685(1)040AS 3.5 6 3.9
10.0 D T340D106(1)040AS 4.5 6 2.6
15.0 D T340D156(1)040AS 6.0 6 2.0
22.0 D T340D226(1)040AS 9.0 6 1.7
33.0 E T340E336(1)040AS 10.0 6 1.3
47.0 E T340E476(1)040AS 10.0 6 1.0
50 VOLT RATING AT 85°C — 33 VOLT AT 125°C
0.1 A T340A104(1)050AS 1.0 6 220.0
0.15 A T340A154(1)050AS 1.0 6 150.0
0.22 A T340A224(1)050AS 1.0 6 100.0
0.33 A T340A334(1)050AS 1.0 6 75.0
0.39 B T340B394(1)050AS 1.0 6
0.47 B T340B474(1)050AS 1.0 6 50.0
0.56 B T340B564(1)050AS 1.0 6
0.68 B T340B684(1)050AS 1.0 6 36.0
0.82 B T340B824(1)050AS 1.0 6
1.0 B T340B105(1)050AS 1.0 6 25.0
1.2 B T340B125(1)050AS 1.0 6
1.5 B/C T340(2)155(1)050AS 1.1 6 15.0
1.8 B T340B185(1)050AS 1.1 6
2.2 B/C T340(2)225(1)050AS 1.5 6 11.0
2.7 C T340C275(1)050AS 1.5 6
3.3 C/D T340(2)335(1)050AS 2.5 6 7.5
3.9 C T340C395(1)050AS 3.0 6
4.7 C/D T340(2)475(1)050AS 3.5 6 5.5
5.6 C T340C565(1)050AS 4.0 6
6.8 D/F T340(2)685(1)050AS 5.0 6 4.0
8.2 D/F T340(2)825(1)050AS 6.0 6
10.0 D/F T340(2)106(1)050AS 7.0 6 2.8
12.0 D/F T340(2)126(1)050AS 8.0 6
15.0 D/F T340(2)156(1)050AS 9.0 6 2.2
18.0 D/F T340(2)186(1)050AS 10.0 6
22.0 E T340E226(1)050AS 10.0 6 1.7
TANTALUM MOLDED / RADIAL — MIL-C-49137/6
T370/T378 (CX06) MIL-PRF-49137/6 SERIES
58 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
The KEMET Micron Series is available in a variety of case styles and
sizes. They are designed to operate from -55°C to +85°C at full volt-
age and to +125°C with derating. Typical applications include use in
bypass coupling, filtering, and timing circuits.
The KEMET Micron Series is qualified under MIL-PRF-49137/6 as
military styles CX06 (T378 Series).
The KEMET T370 Series is encapsulated in a molded gold color
epoxy. This encasement technique allows maximum utilization of cir-
cuit board real estate with precisely centered leads in a microminia-
ture case.
These molded packages also provide significant improvements in
overall dimensional consistency as well as lead wires precisely
spaced to within .010 inches (.25mm).
With our new molded packaging design, these capacitors can now
be marked using our laser printing technique. The KEMET laser
marking system ensures legibility and permanency while offering a
complete alphanumeric print format. Laser print meets all require-
ments of the Resistance to Solvents Test, method 215 of
MIL-STD-202.
•CAPACITANCE/VOLTAGE RANGE:
T370 Series: 0.68-220µF, 3-35 Volts.
T378 Series: 2.2-220µF, 3-35 Volts.
•CAPACITANCE TOLERANCE: Available in stan-
dard EIA nominal values with ±20% tolerance
standard, +40% -20%, ±10% and ±5% are also
available.
•DISSIPATION FACTOR: Maximum DF limits are
shown in corresponding series part number list-
ings on page 60. See Application Notes Section,
page 76 for additional information.
•DC LEAKAGE CURRENT: Maximum leakage val-
ues at 25°are shown in part number listings, page
60. See Application Notes Section, page 76 for
additional information.
•
RATED VOLTAGE; WORKING VOLTAGE; SURGE
VOLTAGE; REVERSE VOLTAGE: See Application
Notes Section, pages 76 & 77 for description.
•IMPEDANCE and ESR: See Application Notes
Section, pages 78 for description. Reference ESR
values are listed in table below.
•AC RIPPLE VOLTAGE: Permissible AC ripple volt-
age is related to the ESR of the capacitor and the
power dissipation capabilities of a particular case
size. Thermal capacities for the various case sizes
have been determined and are listed in Table
below. For additional description see page 78.
•ENVIRONMENTAL CONSIDERATIONS:
A. Shock Test: MIL-STD-202, Method 213
Condition 1.
B. Thermal Shock, MIL-STD-202, Method 107.
C.Moisture Resistance: MIL-STD-202,
Method 106.
D.Solderability: MIL-STD-202, Method 208.
For additional Environmental Test Information see
pages 80, 81 and 82.
•LEAD MATERIAL: Solder coated nickel per
MIL-STD1266, type N32.
•LEAD TAPE and REEL: Reeling per specification
RS-468. See pages 72 and 74 for additional infor-
mation.
PERFORMANCE CHARACTERISTICS
Case
Size Watts
C.070
D.080
E.090
F.100
Maximum Power Dissipation Capability @ 25°C
T370 ESR (OHMS) at 100 kHz @ +25°C
(The ESR values provided below are for
reference only. No warranty, as stated on
page 3 and reincorporated here, is made as
to the accuracy of these values for any
particular T370 Series product.)
0.68
1.00
1.50
2.20
3.30
4.70
6.80
10.0
15.0
22.0
33.0
47.0
68.0
100.0
150.0
6.0
5.0
3.7
3.0
2.0
1.8
1.6
0.9
6.0
5.0
3.7
2.7
2.1
1.7
1.3
1.0
2.5
2.0
1.6
1.3
1.0
5.5
4.5
3.6
2.9
2.3
1.8
1.4
1.2
6.0
5.0
4.0
3.1
2.5
2.0
1.5
1.2
10.0
8.0
6.0
5.0
4.0
3.0
2.5
2.0
1.6
1.3
Cap.
µF6
Volt 10
Volt 15
Volt 20
Volt 25
Volt 35
Volt
TANTALUM MOLDED / RADIAL MIL-PRF-49137/6
T370/T378 (CX06) SERIES
T370/T378 Series Tantalum
Molded / Radial
KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300 59
CASE H W T S LEAD DIAMETER
SIZE MAX. MAX. MAX. LEAD SPACING ± .001 (.03)
*C .225 (5.72) .185 (4.70) .075 (1.91) .150 ± .010 (3.81 ± .25) .016 (.41)
D .290 (7.37) .220 (5.59) .110 (2.79) .180 ± .010 (4.57 ± .25) .016 (.41)
E .310 (7.87) .230 (5.84) .130 (3.30) .200 ± .010 (5.08 ± .25) .016 (.41)
F .475 (12.07) .375 (9.53) .150 (3.81) .300 ± .010 (7.62 ± .25) .016 (.41)
CAPACITOR OUTLINE DRAWING DIMENSIONS - INCHES (MILLIMETER)
*C case size T370 style only.
CAPACITOR MARKING
INDUSTRIAL PRODUCT MILITARY PRODUCT
ORDERING INFORMATION
KEMET PART NUMBER
T 37X D 475 M 035 A S*
TANTALUM
SERIES
T370, T378
CASE SIZE
CAPACITANCE IN PICOFARAD CODE
First two digits are significant figures.
Third figure is the number of zeros following.
CAPACITANCE TOLERANCE
M — ±20%, K — ±10%, J — ±5 %
L— +40%, -20%
LEAD MATERIAL
S —Standard
(solder-coated nickel)
FAILURE RATE LEVEL
A— Not Applicable
VOLTAGE RATING
MIL-PRF-49137/6 PART NUMBER
CX06(T378) STYLE
CX 06 D 335 K
TYPE
Fixed, solid tantalum, polar,
nonhermetically sealed capacitors.
STYLE
06-T378 (radial leads)
VOLTAGE
CAPACITANCE TOLERANCE
Symbol Capacitance Tolerance
Percent ±
K10
M20
CAPACITANCE
The nominal capacitance value,
expressed in picofarads (pF), is
identified by a three digit number.
The first two digits represent signifi-
cant figures and the last digit speci-
fies the number of zeros to follow.
Symbol Rated (85°C) Surge (85°C)
Volts, dc Volts, dc
A 2 2.6
B3 4
C4 5
D6 8
F10 13
H15 20
J20 26
K25 32
M35 46
H
Leads Lengths
Both
.350±.050
(8.89±1.27)
W
T378
1
.
6
2
5±.125
(41.28±3.18)
1
.
37
5
±
.1
25
(34.93±3.18)
(-)
S
(+)
T
T370
Military
Part
Number
Polarity
Indicator (+)
KEMET
Trademark
Date Code
(Year/Week)
CX06M226M
0126VDK
T378
Lot Code
Capacitance
Tolerance
Polarity
Indicator (+)
KEMET
Trademark
Voltage
Rating
106M
020K
Capacitance
Value
(pf code)
T370
*Part Number Example: T370D475M035AS (14 digits – no spaces)
CAPACITANCE CASE INDUSTRIAL PRODUCT MILITARY PRODUCT DC LEAKAGE DISSIPATION FACTOR
µF SIZE T370 CXO6 T378 µA@25°C %@25°C 120HZ
PART NO. PART NO. PART NO. MAXIMUM MAXIMUM
3 VOLT RATING AT 85°C—2.0 VOLT RATING AT 125°C
220.0 F T370F227(1)003AS CX06B227(2) T378F227(3)003AS 9.0 15
4 VOLT RATING AT 85°C—2.7 VOLT RATING AT 125°C
15.0 C T370C156(1)004AS 1.0 8
47.0 D T370D476(1)004AS CX06C476(2) T378D476(3)004AS 2.0 8
68.0 E T370E686(1)004AS CX06C686(2) T378E686(3)004AS 3.0 8
6 VOLT RATING AT 85°C—4.0 VOLT RATING AT 125°C
10.0 C T370C106(1)006AS 1.0 6
33.0 D T370D336(1)006AS CX06D336(2) T378D336(3)006AS 2.0 6
47.0 E T370E476(1)006AS CX06D476(2) T378E476(3)006AS 3.0 6
150.0 F T370F157(1)006AS CX06D157(2) T378F157(3)006AS 9.0 10
10 VOLT RATING AT 85°C—7.0 VOLT RATING AT 125°C
6.8 C T370C685(1)010AS 1.0 6
22.0 D T370D226(1)010AS CX06F226(2) T378D226(3)010AS 2.0 6
33.0 E T370E336(1)010AS CX06F336(2) T378E336(3)010AS 3.0 6
100.0 F T370F107(1)010AS CX06F107(2) T378F107(3)010AS 9.0 8
15 VOLT RATING AT 85°C—10 VOLT RATING AT 125°C
15.0 D T370D156(1)015AS CX06H156(2) T378D156(3)015AS 2.0 6
22.0 E T370E226(1)015AS CX06H226(2) T378E226(3)015AS 3.0 6
68.0 F T370F686(1)015AS CX06H686(2) T378F686(3)015AS 9.0 8
20 VOLT RATING AT 85°C—13 VOLT RATING AT 125°C
3.3 C T370C335(1)020AS 1.0 6
4.7 C T370C475(1)020AS 1.0 6
10.0 D T370D106(1)020AS CX06J106(2) T378D106(3)020AS 2.0 6
15.0 E T370E156(1)020AS CX06J156(2) T378E156(3)020AS 3.0 6
47.0 F T370F476(1)020AS CX06J476(2) T378F476(3)020AS 9.0 8
25 VOLT RATING AT 85°C—17 VOLT RATING AT 125°C
2.2 C T370C225(1)025AS 1.0 6
6.8 D T370D685(1)025AS CX06K685(2) T378D685(3)025AS 2.0 6
10.0 E T370E106(1)025AS CX06K106(2) T378E106(3)025AS 3.0 6
33.0 F T370F336(1)025AS CX06K336(2) T378F336(3)025AS 9.0 6
35 VOLT RATING AT 85°C—23 VOLT RATING AT 125°C
0.68 C T370C684(1)035AS 1.0 6
1.0 C T370C105(1)035AS 1.0 6
1.5 C T370C155(1)035AS 1.0 6
2.2 D T370D225(1)035AS CX06M225(2) T378D225(3)035AS 2.0 6
3.3 D T370D335(1)035AS CX06M335(2) T378D335(3)035AS 2.0 6
4.7 D T370D475(1)035AS CX06M475(2) T378D475(3)035AS 2.0 6
6.8 E T370E685(1)035AS CX06M685(2) T378E685(3)035AS 3.0 6
10.0 F T370F106(1)035AS CX06M106(2) T378F106(3)035AS 9.0 6
15.0 F T370F156(1)035AS CX06M156(2) T378F156(3)035AS 9.0 6
22.0 F T370F226(1)035AS CX06M226(2) T378F226(3)035AS 9.0 6
TANTALUM MOLDED / RADIAL — MIL-PRF-49137/6
T370/T378 (CX06) SERIES
60 KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606 (864) 963-6300
RATINGS & PART NUMBER REFERENCE
(1) To complete KEMET part number, insert capacitance tolerance symbol as follows: L = +40%, –20%; M = ±20%; K = ±10%; J = ±5%.
(2) To complete military part number, insert capacitance tolerance symbol as follows: M = ±20%; K = ±10%.
(3) To complete KEMET part number, insert capacitance tolerance symbol as follows: M = ±20%; K = ±10%.
