RFS1003 5.1-5.9 GHz U-NII Power Amplifier 2 GND N/C VD2 1 GND N/C VD1 The RFS1003 power amplifier is a high-power, highperformance GaAs MESFET IC designed for use in transmit applications in the 5.1-5.9 GHz frequency band. With a P1dB of 29 dBm, the device is ideal as a final stage for wireless applications requiring high transmit linearity. The input of the PA is matched to 50 ohms and the output can be easily matched for optimum linearity and power performance at the desired frequency of operation between 5.1 and 5.9 GHz. GND Product Description * U-NII fixed-wireless CPE * 5 GHz ISM band wireless equipment * WLAN/802.11a/HIPERLAN/2 N/C Applications 24 23 22 21 20 19 18 N/C 17 GND 16 RF OUT 15 RF OUT 14 RF OUT 13 GND Interstage Match GND 3 RF IN 4 GND 5 N/C Input Match Interstage Match 6 11 12 VG3 VG1 10 GND GND 9 VG2 8 GND 7 Product Features * * * * * 29 dBm P1dB@7V 24 dBm P1dB@3V 20 dB gain Input matched to 50 ohms Simple output matching Functional Block Diagram 4 1.00 0.80 0.45 0.35 4.00 0.275 0.225 Pin 1 24 1 ALL DIMENSIONS ARE IN MILLIMETERS, ANGLES IN DEGREES. 1 INDEX AREA 4.00 0.50 TYP 2 THE TERMINAL #1 IDENTIFIER AND PAD NUMBERING CONVENTION SHALL CONFORM TO JESD 95-1 SPP-012 3 LEAD COPLANARITY: 0.05 MAX. 4 DIMENSION APPLIES TO METALLIZED PAD AND IS MEASURED BETWEEN 0.25 AND 0.30 MM FROM PAD TIP. 1.00 0.05 2.80 SQ TOP VIEW SIDE VIEW BOTTOM VIEW 4x4 mm Package Outline 05/2003 RFS1003 5.1-5.9 GHz U-NII Power Amplifier Parameter Specification 1 Min. Overall Frequency Range Output P1dB Typ. 5150 Efficiency at P1dB Small Signal Gain Gain Flatness Harmonics 2nd Harmonic 3rd Harmonic Spurious (Stability)2 Reverse Isolation Noise Figure Input Return Loss Output Return Loss Power Supply Drain Operating Voltage Gate Operating Voltage Current Consumption 10 Max. 5850 Condition 29 24 28 20 21 0.5 MHz dBm dBm % dB dB dB -35 -35 -60 50 8.7 15 11 dBc dBc dBc/30 kHz dB dB dB dB 3 7 -1.1 400 350 25 Gate Leakage Current Unit VDD = 7V VDD = 3V PIN = -20 dBm; VDD = 7V PIN = -20 dBm; VDD = 3V Across 100 MHz Band V V mA mA A PIN = -30 to +10 dBm VDD = 7V VDD = 3V Note 1: Test Conditions: VDD = 7.0V, PIN = +10dBm, Freq. = 5850MHz, VGG = -1.1 V, T =25C. Note 2: Load VSWR is set to 7:1 and the angle is varied 360 degrees. Absolute Maximum Ratings Parameter DC Power Supply DC Gate Voltage DC Supply Current Maximum RF input level Operating Ambient Temperature Storage Temperature Rating Unit 8.0 -5.0 min, -0.5 max 1000 +13 -40 to +85 -55 to +150 V V mA dBm C C Ordering Information Part Number PRFS-1003-0EVL PRFS-1003-0005 PRFS-1003-0006 PRFS-1003-0007 PRFS-1003-0008 PRFS-1003-0009 2 Temp. Range ( C) -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 Package Description Evaluation Board 13" Reverse Tape/Reel 13" Tape/Reel 7" Reverse Tape/Reel 7" Tape/Reel Bulk - 4x4 mm 24-pin LPCC 05/2003 Quantity 1 2500 pcs. 2500 pcs. 1000 pcs. 1000 pcs. 1-999 pcs. NOTES 05/2003 3 ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059,U.S.A. Tel: +1(908)668-5000 Fax: +1(908)668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 4 05/2003