Alle Rechte vorbehalten! Al/ rights reserved 1 | 2 | 3 | 4 5 6 ? | 8 +0,1 +0,1 Position _ 44 3733 Fe no 05 3,4 43 * position 1 | 2,8 40,2 <0 SS 32x 2 (=64) es SS a i 10x 2 (+20) Reihe S~~O =, fs S y = S S> D = R a Z a i == a aT] 1 a 10x 2 (=20) Kontaktbelegung contact arrangement N tT Be a anh , = un + pe | 5 a1 7b > 11,35 "098 le ell lols alelelo yey} tA 0,15 45) 41137 33129) 25) 211171131915 1 1 on 12,2 75 95 47 43 39 31.27 23 19 15 11 7? 3 ~N & Kontaktposition belegt _ position with contact en a Von fiz/t aus, jedes 2. o Kontaktposition nicht belegt | 17 26 200 4103 _ tbe/ovene in) A board drillings ; 32x | 2 (=64) och Wat each ne position without contact 7 min. 1,2? pm (S0win) Ni vas | hole f. upper shielding 1726 200 2103 2 Au tiber/over Ni Position _ 4 37 33 position 14 17 26 200 1103 1 Au tiber/over Ni etfz Bestell-Nr. Anforderungsstufe]} Kontaktoberflache CF nach IEC a part-no. performance level| contact plating | - = acc. fo /EC Reihe 8 a 4-6) AUL Dimensions in am | Techn. Character. Nicht tolerierte Nafe/ free size felerances alle Lcher ~ Original Size O1N A 3 IEC 61076-4-101 all holes A 35456 01.12.08) 10 lat. fame HabstablScale | har-bus HM Federleiste, Typ Monoblock 47, 200 pol. [po 05 20.6 40,05 35368 |08. 10.08/10 betail. [10.05.99] Him nit geteilter Schirmung Reihe-f 32387 |18.11.04)Hl. Insp. 110.05.99| Ko { 1 { har-bus HM female connector, type monoblock 47, 200 pol. Bohrlochdurchmesser: 60,7 40,02 mm 31234 |10.10.02Hage. Stand. (5:1) vith separated shield rov-f Lochdurchmesser (mit Oberflache): 0,6+0,05 mm 30040 120.09.04/HL. Blatt! page drill hole dia.: 0, 720,02 am 30074 106.08.04|Wi HARTING Electronics GabH & Co. KG TB 17 26 200 X 1 03 4 through hole dia. (after plating): 90, 620,05 mm Mod. | Dat. | Name )-32339 ESPELKAMP was Ga. ; 1 2 | 3 | 4 5 | 6 | } | 8