15-22/R6GHC-A01/2T - Everlight International Corp.

EVERLIGHT ELECTRONICS CO.,LTD.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Technical Data Sheet

Chip LED with Bi-Color (Multi-Color)

15-22/R6GHC-A01/2T

Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment.

․Compatible with infrared and vapor phase reflow

solder process.

․Multi-color type.

․Pb-free.

․The product itself will remain within RoHS

compliant version.

Descriptions

․The 15-22 SMD Taping is much smaller

than lead frame type components, thus

enable smaller board size, higher packing

density, reduced storage space and finally

smaller equipment to be obtained.

․Besides, lightweight makes them ideal for

miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in

telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Device Selection Guide

Chip

Type Material Emitted Color

Lens Color

R6 AlGaInP Brilliant Red

GH InGaN Brilliant Green

Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Package Outline Dimensions

Red

-

+

Green

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

Forward Current IF R6:25

GH:25 mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Electrostatic Discharge(HBM) ESD R6:2000

GH:150 V

Power Dissipation Pd R6:60

GH:110 mW

Peak Forward Current

(Duty 1/10 @1KHz) IFP R6:60

GH:100 mA

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous Intensity Iv R6

GH

90

112 130

165

-----

----- mcd

Viewing Angle 2θ1/2 ----- 140 ----- deg

Peak Wavelength λp R6

GH

----- 632

518 ----- nm

Dominant Wavelength λd R6

GH

-----

624

525

-----

----- nm

Spectrum Radiation

Bandwidth

△λ R6

GH ----- 20

35 ----- nm

Forward Voltage VF R6

GH 1.7

2.7

2.0

3.3

2.4

3.7 V

IF=20mA

Reverse Current IR ----- ----- 10

50 μA VR=5V

Notes: Tolerance of Luminous Intensity ±10%

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Typical Electro-Optical Characteristics Curves

R6

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Typical Electro-Optical Characteristics Curves

GH

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 10 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

15-22/R6GHC-A01/2T

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 11 of 11

Device No. : DSE-152-085 Prepared date: 07-15-2004 Prepared by : Jessica Chang

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of the

hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com