RF & MICROWAVE SERIES SURFACE MOUNT, HIGH REPEATABILITY, BROADBAND CENTIGRID(R) RELAYS DPDT SERIES DESIGNATION GRF100 GRF103 RELAY TYPE GRF100 Repeatable, RF Centigrid(R) relay GRF103 Sensitive, repeatable, RF Centigrid(R) relay DESCRIPTION INTERNAL CONSTRUCTION The ultraminiature GRF100 and GRF103 relays are designed to provide a practical surface-mount solution with improved RF signal repeatability over the frequency range. GRF100 and GRF103 relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole-to-pole isolation. This ground shield provides a ground interface that results in improved high-frequency performance as well as parametric repeatability. The GRF100 and GRF103 extend performance advantages over similar RF devices that simply offer formed leads for surface mounting. These relays are engineered for use in RF attenuator, RF switch matrices, ATE and other applications that require dependable high frequency signal fidelity and performance. The GRF100 and GRF103 feature: * High repeatability * Broader bandwidth * Metal enclosure for EMI shielding * High isolation between control and signal paths * High resistance to ESD ENVIRONMENTAL AND PHYSICAL SPECIFICATIONS -65C to +125C Temperature Storage (Ambient) Operating -55C to +85C Vibration (General Note 1) 10 g's to 500 Hz Shock (General Note 1) 30 g's, 6 msec, half-sine Enclosure Hermetically sealed GRF100 0.09 oz. (2.55g) max. GRF103 0.16 oz. (4.5g) max. Weight (c)2003 TELEDYNE RELAYS The following unique construction features and manufacturing techniques provide excellent robustness to environmental extremes and overall high reliability: * Uniframe motor design provides high magnetic efficiency and mechanical rigidity * Minimum mass components and welded construction provide maximum resistance to shock and vibration * Advanced cleaning techniques provide maximum assurance of internal cleanliness * Gold-plated precious metal alloy contacts ensure reliable switching * Hermetically sealed SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com GRF100 GRF103 Page 1 GRF100 GRF103/1203/Q1 RF & MICROWAVE SERIES GRF100 AND GRF103 TYPICAL RF CHARACTERISTICS (See RF Notes) Isolation Across Contacts (RF Note 4) Isolation Pole to Pole (RF Note 5) -20 -20 -30 Isolation (dB) Isolation (dB) -30 -40 -40 -50 -50 -60 -70 -60 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0 6000 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 Frequency (MHz) Frequency (MHz) VSWR (RF Note 6) Insertion Loss (RF Note 6) 0 3.00 2.60 -0.4 -0.6 2.20 -0.8 VSWR Insertion Loss (dB) -0.2 -1 -1.2 -1.4 1.80 1.40 -1.6 -1.8 0 1.00 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 0 6000 500 1000 1500 2000 Frequency (MHz) 2500 3000 3500 4000 4500 5000 5500 6000 Frequency (MHz) GRF100 Time Response (RF Note 6) 1.1 0.9 90% Volt 0.7 37ps reference 0.5 82.8ps propagation delay time 0.3 54.7ps pulse rise time 10% 0.1 -0.1 -100 0 100 200 300 400 500 600 700 800 900 Time (ps) RF NOTES 1. Test conditions: 2. 3. 4. 5. 6. 7. a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid(R) 6002 with SMA connectors. (RT/duroid(R) is a registered trademark of Rogers Corporation.) b. RF ground shield is soldered to PCB RF ground plane. c. Room ambient temperature. d. Terminals not tested were terminated with 50-ohm load. e. Contact signal level: -10 dBm. f. No. of test samples: 4. Data presented herein represents typical characteristics and is not intended for use as specification limits. Data is per pole, except for pole-to-pole data. Data is the average from readings taken on all open contacts. Data is the average from readings taken on poles with coil energized and de-energized. Data is the average from readings taken on all closed contacts. Test fixture effect de-embedded from frequency and time response data. GRF100 GRF103 Page 2 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com (c)2003 TELEDYNE RELAYS GRF100 GRF103/1203/Q1 REPEATABILITY CHARACTERISTICS GRF100 RELAYS Normally Open 100% % Total number of recorded test cycles % Total number of recorded test cycles Normally Closed 80% 60% 40% 20% 100% 80% 60% 40% 20% 0% 0% 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0 0.2 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.14 0.16 0.18 0.2 Repeatability (dB) Repeatability (dB) REPEATABILITY CHARACTERISTICS GRF103 RELAYS Normally Open Normally Closed 100% % Total number of recorded test cycles % Total number of recorded test cycles RF & MICROWAVE SERIES GRF100 AND GRF103 TYPICAL RF INSERTION LOSS REPEATABILITY CHARACTERISTICS (See RF Insertion Loss Repeatability Notes) 80% 60% 40% 20% 100% 80% 60% 40% 20% 0% 0% 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0 0.02 0.04 0.06 0.08 Repeatability (dB) 0.1 0.12 Repeatability (dB) RF INSERTION LOSS REPEATABILITY NOTES 1. Test conditions: a. Fixture: .031" copper clad, reinforced PTFE, RT/duroid(R) 6002 with SMA connectors. (RT/duroid(R) is a registered trademark of Rogers Corporation.) b. Test performed at room ambient temperature. c. Contact signal level: -10 dBm. 2. Data presented herein represents typical characteristics and is not intended for use as specification limits. 3. Insertion loss repeatability measured over frequency range from 50 MHz to 4 GHz. (c)2003 TELEDYNE RELAYS SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com GRF100 GRF103 Page 3 GRF100 GRF103/1203/Q1 Contact Arrangement Rated Duty Contact Resistance Contact Load Rating Contact Life Rating Coil Operating Power GRF100 GRF103 GRF100 Release Time GRF103 Intercontact Capacitance Insulation Resistance Dielectric Strength Operate Time DPDT Continuous 0.100 ohm max. Low Level: 10 to 50 A/10 to 50mV 10,000,000 cycles (typical) at low level GRF100-5: 500 mW typical @ nominal rated voltage GRF100-12: 369 mW typical @ nominal rated voltage GRF103-5: 250 mW typical @ nominal rated voltage GRF103-12: 180 mW typical @ nominal rated voltage 4.0 msec max. 6.0 msec max. 3.0 msec max. 3.0 msec max. 0.4 pf typical 1,000 megohms min. between mutually isolated terminals 350 Vrms/60Hz @ atmospheric pressure DETAILED ELECTRICAL SPECIFICATIONS (@25C) BASE PART NUMBERS Coil Voltage, Nominal (Vdc) Coil Resistance (Ohms 20%) Pick-up Voltage (Vdc, Max.) GRF100-5 GRF103-5 GRF100-12 GRF103-12 5.0 50 100 3.6 12.0 390 800 9.0 GRF100 GRF103 GENERAL NOTES 1. Relays will exhibit no contact chatter in excess of 10 sec or transfer in excess of 1 sec. 2. Unless otherwise specified, parameters are initial values. 3. Relays may be subjected to 260C, peak solder reflow temperature, 1 minute, 3 passes. 4. Butt-lead ends are coplanar within .003" (0.08). 5. Application notes available for PCB layout and mounting information. OUTLINE DIMENSIONS .335 SQ (8.51) MAX .435 MAX (11.05) (GRF103) .330 MAX (8.38) (GRF100) .035 REF (0.89) 8 LEADS LENGTH .033 (0.84) REF .035 REF (0.89) .031 REF (0.79) DIA. +.002 .017 -.001 +0.05 (0.43) -0.03 8 7 .375 SQ (9.531) MAX .100 TYP (2.54) 1 6 2 5 4 3 .100 TYP (2.54) SCHEMATIC-TERMINAL VIEW PIN NUMBERS ARE FOR REFERENCE ONLY, NOT MARKED ON RELAY SEE NOTE 3. U.S. PATENT PENDING NOTES: 1. DIMENSIONS ARE IN INCHES. METRIC EQUIVALENTS IN MILLIMETERS ARE SHOWN IN ( ). 2. UNLESS OTHERWISE SPECIFIED, TOLERANCES ON DIMENSIONS ARE .010 INCH (0.025 mm). 3. FOR OPTIMAL RF PERFORMANCE, SOLDER BOTTOM OF GROUND SHIELD TO PCB RF GROUND PLANE. GRF100 GRF103 Page 4 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE www.teledynerelays.com (c)2003 TELEDYNE RELAYS GRF100 GRF103/1203/Q1 RF & MICROWAVE SERIES GRF100 GRF103 GENERAL ELECTRICAL SPECIFICATIONS (@25C) Appendix A: Spacer Pads Pad designation and bottom view dimensions Height O.150 [3.81] (REF) Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for TO-5 Dim H MAX "M4" Pad for Centigrid(R) .156 [3.96] (REF) Dim H MAX .256 [6.5] (REF) "M9" Pad for Centigrid(R) For use with the following: ER411T ER412, ER412D, ER412DD 712, 712D, 712TN, RF300, RF310, RF320 ER420, ER422D, ER420DD, 421, ER421D, ER421DD, ER422, ER422D, ER422DD, 722, 722D, RF341 ER431T, ER432T, ER432, ER432D, ER432DD 732, 732D, 732TN, RF303, RF313, RF323 .295 (7.49) .300 (7.62) .305 (7.75) .400 (10.16) .410 (10.41) RF312 .350 (8.89) ER411, ER411D, ER411DD .295 (7.49) ER431, ER431D, ER431DD .400 (10.16) RF311 .300 (7.62) RF331 .410 (10.41) 172, 172D .305 (7.75) ER114, ER114D, ER114DD, J114, J114D, J114DD .300 (7.62) ER134, ER134D, ER134DD, J134, J134D, J134DD .400 (10.16) RF100 .315 (8.00) RF103 .420 (10.67) 122C, A152 .320 (8.13) ER116C, J116C .300 (7.62) ER136C, J136C .400 (10.16) RF180 .325 (8.25) A150 .305 (7.75) Notes: 1. Spacer pad material: Polyester lm. 2. To specify an "M4" or "M9" spacer pad, refer to the mounting variants portion of the part numbering example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specied, tolerance is .010 (.25). 5. Add 10 m to the contact resistance show in the datasheet. 6. Add 0.01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. (c) 2008 Teledyne Relays Dim. H Max. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Appendix A: Spreader Pads Pad designation and bottom view dimensions Height For use with the following: .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .150 [3.81] .014 [0.36] (REF) .300 [7.62] .100 [2.54] .370 [9.4] MIN .200 [5.08] "M" Pad 5/ 6/ .390 [9.91] SQ .100 [2.54] .100 [2.54] .150 [3.81] .300 [7.62] .300 [7.62] .150 [3.81] Dim H MAX ER411T, J411T, ER412, ER412D ER412DD, J412, J412D, J412DD ER412T, J412T 712, 712D, 712TN ER431T, J431T, ER432, ER432D ER432DD, J432, J432D, J432DD ER432T, J432T 732, 732D, 732TN .370 [9.4] MAX SQ .100 [2.54] Dim H MAX .150 [3.81] .014 [0.36] (REF) .300 [7.62] .100 [2.54] .200 [5.08] .370 [9.4] MIN "M3" Pad 5/ 6/ 9/ .393 (9.99) .493 (12.52) .503 (12.78) .398 (10.11) ER411T ER412, ER412D, ER412DD J412, J412D, J412DD .441 (11.20) 732, 732D "M2" Pad 7/ 8/ .388 (9.86) ER420, J420, ER420D, J420D ER420DD, J420DD, ER421, J421 ER421D, J421D, ER421DD J422D, ER422DD, J422DD, 722 712, 712D ER421, ER421D, ER421DD 722, 732D ER431T ER432, ER432D, ER432DD .130 [3.3] Dim. H Max. ER411, ER411D, ER411DD ER411TX ER412X, ER412DX, ER412DDX ER412TX 712X, 712DX, 712TNX ER420X, ER420DX, ER420DDX ER421X, ER421DX, ER421DDX ER422X, ER422DX ER422DDX, 722X, 722DDX ER431, ER431D, ER431DD ER431TX ER432X, ER432DX, ER432DDX ER432TX 732X, 732DX, 732TNX .451 (11.46) .451 (11.46) .546 (13.87) .556 (14.12) .388 (9.86) .393 (9.99) .398 (10.11) .493 (12.52) .503 (12.78) Notes: 1. Spreader pad material: Diallyl Phthalate. 2. To specify an "M", "M2" or "M3" spreader pad, refer to the mounting variants portion of the part number example in the applicable datasheet. 3. Dimensions are in inches (mm). 4. Unless otherwise specied, tolerance is .010" (0.25). 5/. Add 25 m to the contact resistance shown in the datasheet. 6/. Add .01 oz. (0.25 g) to the weight of the relay assembly shown in the datasheet. 7/. Add 50 m to the contact resistance shown in the datasheet. 8/. Add 0.025 oz (0.71 g) to the weight of the relay assembly shown in the datasheet. 9/. M3 pad to be used only when the relay has a center pin (e.g. ER411M3-12A, 722XM3-26.) (800) 284-7007 * www.teledynerelays.com +44 (0) 1236 453124 * www.teledyne-europe.com (c) 2008 Teledyne Relays Appendix A: Ground Pin Positions O.200 [O5.08] 363 "Z" POSITION "X" POSITION "Y" POSITION "Z" O.200 [O5.08] "Y" 453 TO-5 Relays: ER411T, ER412, ER412T, ER420, ER421, ER422, ER431T, ER432, ER432T, 712, 712TN, 400H, 400K, 400V, RF300, RF303, RF341, RF312, RF310, RF313, RF320, RF323 "Y" POSITION POSITION TO-5 Relays: ER411, ER431, RF311, RF331 POSITION .100 [2.54] "W" "Z" .100 [2.54] .050 [1.27] "X" .100 [2.54] POSITION POSITION "Z" POSITION POSITION .100 [2.54] POSITION "U" POSITION (ER116C and ER136C only) Centigrid(R) Relays: RF180, ER116C, 122C, ER136C .100 [2.54] Centigrid(R) Relays: RF100, RF103, ER114, ER134, 172 Indicates ground pin position Indicates glass insulated lead position Indicates ground pin or lead position depending on relay type (c) 2008 Teledyne Relays "Y" .100 [2.54] NOTES 1. Terminal views shown 2. Dimensions are in inches (mm) 3. Tolerances: .010 (.25) unless otherwise specied 4. Ground pin positions are within .015 (0.38) dia. of true position 5. Ground pin head dia., 0.035 (0.89) ref: height 0.010 (0.25) ref. 6. Lead dia. 0.017 (0.43) nom. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE