44,4 -0,2 1 b1 2,54 0,7 3 2,54 a16 +0,2 6 8 b16 +0,1 a1 15 x 2,54 = 38,1 M 1:1 6 0,1 54 -0,2 3,95 3 -0,4 48,26 Anforderungsstufe 2,54 2,54 a b 3 +0,1 10,2 -0,2 7,4 ERNI RC 2 XXXXXXX 12,6 +0,1 max.7 0,3 2,5 Datum date class Elastische Einpresszone / compliant pressfit zone Isolierwerkstoff / housing material: PBT GF30 Bauart 7 / type 7 Anforderungsstufe 2 = 400 Steckzyklen / class 2 = 400 mating cycles Fehlende Mae und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 Bestuckungsplan / contact layout 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Missing information and dimensions per IEC 60 603-2 Schichtaufbau im metallisierten Loch siehe Zeichnung 164062/Nr.6 b diameter of drilled hole see drawing 164062/No.6 a 1) 1,0 bestuckt / assemble 1,0 +0,09 -0,06 +0,09 -0,06 Durchmesser des metallisierten Loches diameter of finished plated-through hole Leiterplatten-Lochbild / PCB drillhole pattern +0,1 1) 0,05 alle Locher all holes 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 2,54 15x 2,54 =38,1 48,26 5,3 0,1 2,54 2,54 a b Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 2,8 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Federleiste Q/2 32 EE female conn. Q/2 32 pressfit 100301120001 www.ERNI.com b 13.12.2011 Index Date Class STVQ/2 I A3