DIL44/PLCC44ZIF - DATAMAN - Datasheet.Live

DIL44/PLCC44 ZIF

(ord.no. 70-0041)

universal adapter, assigned for devices in PLCC44

operation (mechanical) life of ZIF socket - 10.000

actuations

there exist also DIL44/PLCC44 ZIF-CS adapter, which

is designed for mass-production purposes

made in Slovakia

Ord. no 70-0041

Socket ZIF PLCC44, open top type

Bottom 2 rows, 2x 22 pins, square, 0.6x0.6mm, rows spacing

600mil

Class Universal

Subclass DIL/PLCC

Adapter manual

Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have

some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the

orientation of the text of title is the same as the text on the top of the device programmer.

Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position

of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF

socket. Then release adapter ZIF socket.

Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is

ready for programming.

Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the

adapter ZIF socket can damage the programmed device.

To take out the device push the top of adapter ZIF socket and remove device from it.

When you finish work with adapter, remove it from the device programmer ZIF socket.

Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during

programming of device.

For handling with the device we recommended to use a vacuum pick up tool.

If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to

connect one 22nF-100nF multilayer capacitor (that meet the EIA X7R or Z5U specification) between leads of

adapter connected to pins VCC and GND pins of programmed chip.

Software note

If software version, you're using currently, doesn't contain support for this programming adapter, please

download the latest version of software - Regular or OnDemand - from our web site.