Toshiba Matsushita Display Technology Co., Ltd
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or p atent rights of Toshiba Matsushita Display Technology or others.
*The information contained her ein may be changed without prior notice. It is therefore advisable to contact Toshiba Mat sushita Display
Technology before proceeding with the design of equipment incorporating this product.
(1/8) 2008-4-17 (Ver.0.3R)
14cm COLOUR TFT-LCD MODULE
(5.7 TYPE)
LTA057A343F
(a-Si TFT)
PRODUCT INFORMATION
FEATURES: (1)5.7” QVGA color display
(2)Wide Viewing Angle (Verti cal: 120 ° , Horizontal: 140 ° )
(3) Built in Long Life LEDs (MTBF:70,000 h)
(Condition; Ta=25°C, PWM=100%(continuous lighting))
(4)Replaceable structure of LED unit
MECHANICAL SPECIFICATIONS
Item Specifications
Dimensional Outline (typ.) 144.0 (W) x 104.6 (H) x 11.5typ.(D) mm
Number of Pixels 320 (W) x 240 (H) pixels
Active Area 115.2 (W) x 86.4 (H) mm
Pixel Pitch 0.36 (W) x 0.36 (H)
Weight (approximately) TBD
Backlight Sidelight (LEDs)
ABSOLUTE MAXIMUM RATINGS
Item Min. Max. Unit
(VDD) -0.3 4.0 V
Supply Voltage (VLED) 0 20.0 V
Input Signal Voltage (VIN) -0.3 VDD+0.3 V
Operating Temperature *1 -20 70 °C
S torage Temperature -30 80 °C
Storage Humidity
(Max. wet bulb temperature = 39°C) 10 90 %(RH)
*1: Only operation is guarantied at Operating Temperature. Display quality is evaluated at +25°C.
ELECTRICAL SPECIFICATION (Ta=25°C) (RECOMMENDED OPERATION CONDITION)
Item Min. Typ. Max. Unit Remarks
(VDD) 3.0 3.3 3.6 V
Supply Voltage (VLED) 10.8 12.0 13.2 V
High Level Input Voltage (VIH) 0.8 VDD --- VDD V
Low Level Input Voltage (VIL) 0 --- 0.2 VDD V
2.2 --- VDD V ON Backlight ON/OFF signal (Vonoff )
0 --- 0.7 V OFF
Luminance control signal (Vpwm) 0 --- 3.3 V
(IDD) *2 --- 150 --- mA
Current Consumption (ILED) --- TBD --- mA PWM=100%
Power Consumption *2 --- TBD --- W PWM=100%
*2: 8 color bars pattern
OPTICAL SPECIFICATION (Ta=25°C)
Item Min. Typ. Max. Unit Remarks
Contrast Ratio (CR) 250 500 --- ---
(Upper+Lower) --- 120 --- ° Viewing Angle
(CR ≥ 10) (Left+Right) --- 140 --- °
(TON) --- 15 50 ms
Response T ime (TOFF) --- 25 50 ms
Luminance (L) 280 400 --- cd/m2 PWM=100%
LED Life Time (MTBF) *3 *4 70,000 h PWM=100%
*3: Conditions;Ta=25°C, continuous lighting
*4: Definitions of failure; 1) Lcd luminance becomes half of the minimum value. 2) LED doesn’t light normally.
TENTATIVE
All information is sub
j
ect to chan
g
e without notice. Please read bottom notes.
RoHS compatible
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(2/8) 2008-4-17 (Ver.0.3R)
DIMENSIONAL OUTLINE
<Front side>
TENTATIVE Unit : mm
Standard tolerance : 0.5
144
115.2(Active aera)
104.6
86.40(Active area)
(14.4)
(72) (72)
(5.9)
(55.5)(49.1)
7.689.4
2.5
7.689.4
2.5
11.5
11.5
depth MAX 3.1
11.5
11.5
14.4
12.3
4- 1.6
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(3/8) 2008-4-17 (Ver.0.3R)
<Rear side>
136.6
96.4
depth MAX 4.5
4-M2
CN2
CN1
33
1
6
1
3.7
4.1
(58.7)
(135.7)
(24.65)
(55.5)
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(4/8) 2008-4-17 (Ver.0.3R)
0.2V 0.2V 0.2V
500ms(min.)
0ms(min.)
0.2V
3.0V 3.0V
DD DD
40ms(max.)
0.5ms(min.)
10ms(max.)
0.2V
0.1ms(min.)
100ms(max.)
0ms(min.)
40ms(max.)
DATA
DE
H,V-sync
CLK
U/D,L/R
V
DD
0ms(min.)
250ms(min.)
LED B/L
OFF
ON
BLOCK DIAGRAM
SEQUENCE OF POWER SUPPLIES AND SIGNALS
1,Y
1,1
1,2
X,Y
X,2
X,1
320 pixels
240 pixels
320,1
320,2
320,Y
320,240
X,2401,240
LEDDriverON/OFF
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(5/8) 2008-4-17 (Ver.0.3R)
TIMING CHART

TIMING SPECIFICATION
Item Symbol Min. Typ. Max. Unit
260 262 340 Th
Frame Period tv 15.9 16.66 17.81 ms
Vertical Display Term tvde 240 240 240 Clk
Vertical Blanking Term tvblnk 20 22 100 Th
V-sync Pulse Width tvw 1.0 2.0 3.0 Th
Vertical Front Porch tvfp 0 4.0 - Th
Vertical Data Sync Period tvds 10 18 20 Th
410 424 436 Tc
Horizontal Period th 49.5 63.6 64.1 us
Horizontal Display Term thde 320 320 320 Tc
H-sync Pulse Width thw 3 51 80 Tc
Horizontal Front Porch thfp 16 18 40 Tc
Horizontal Data Sync Period thds 50 86 100 Tc
Clock Period tc 120 150 156 ns
Clock "H" Time tch 7.0 - - ns
Clock "L" Time tcl 7.0 - - ns
Set Up Time tds 5.0 - - ns
Hold Time tdh 2.0 - - ns
tv
tvw
Vsync
tvfp
th
tvd
tvds
tvblnk
Hsync
DE
12239 240
th
thw
thde
thds
thfp
320
1234
Hsync
DE
RG B D ata
NCLK
tvd
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(6/8) 2008-4-17 (Ver.0.3R)
CONNECTOR PIN ASSIGNMENT FOR INTERFACE
CN1 INPUT SIGNAL
Connector: IMSA-9637S-33A-GF / IRISO electronics co., LTD.
0.5mm pitch, lower face contacting (gilding)
Terminal No. Symbol Function
1 GND1)
2 CLK Clock
3 H-sync Horizontal Sync
4 V-sync Vertical Sync
5 GND1)
6 R02) Red Display Data (LSB)
7 R12) Red Display Data
8 R22) Red Display Data
9 R32) Red Display Data
10 R42) Red Display Data
11 R52) Red Display Data (MSB)
12 GND1)
13 G02) Green Display Data (LSB)
14 G12) Green Display Data
15 G22) Green Display Data
16 G32) Green Display Data
17 G42) Green Display Data
18 G52) Green Display Data (MSB)
19 GND1)
20 B02) Blue Display Data (LSB)
21 B12) Blue Display D ata
22 B22) Blue Display D ata
23 B32) Blue Display D ata
24 B42) Blue Display D ata
25 B52) Blue Display Data (MSB)
26 GND1)
27 DE Data Enable
28 VDD 3.3V
29 VDD 3.3V
30 R/L Horizontal Rev erse(“L” level or Open : Normal, ”H “ level : Reverse)
31 U/D Vertical Reverse(“H” level : Normal, “L” level or Open : Reverse)
32 GND1)
33 NC3) Non Connection
Note 1) Please connect GND pin to ground. Don’t use it as no-connect nor connection with high impedance.
Note 2) Refer to 7 pages.
Note 3) NC terminal should be open. (Don’t use.)
CN2 LED POWER SOURCE
Connector : 53261-0671 / MOLEX Inc.
Mating Connector : 51021-0600 / MOLEX I nc.
Terminal No. Symbol Function
1 VLED Power Supply : +12V
2 VLED Power Supply : +12V
3 VSS GND
4 VSS GND
5 ON/OFF “H(+3.3V)”:ON, “L(GND or Open)”:OFF
6 PWM 1-100%(200Hz)
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(7/8) 2008-4-17 (Ver.0.3R)
256k (k=1024) COLORS COMBINATION TABLE
Display R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Gray Scale
Level
Black L L L L L L L L L L L L L L L L L L ---
Blue L L L L L L L L L L L L H H H H H H ---
Green L L L L L L H H H H H H L L L L L L ---
Light Blue L L L L L L H H H H H H H H H H H H ---
Red H H H H H H L L L L L L L L L L L L ---
Purple H H H H H H L L L L L L H H H H H H ---
Yellow H H H H H H H H H H H H L L L L L L ---
Basic
Color
White H H H H H H H H H H H H H H H H H H ---
Black L L L L L L L L L L L L L L L L L L L 0
L L L L L H L L L L L L L L L L L L L 1
L L L L H L L L L L L L L L L L L L L 2
:
: :
: :
: L3…
L60
H H H H L H L L L L L L L L L L L L L61
Dark
↑
↓
Light H H H H H L L L L L L L L L L L L L L62
Gray
Scale of
Red
Red H H H H H H L L L L L L L L L L L L Red L63
Black L L L L L L L L L L L L L L L L L L L 0
L L L L L L L L L L L H L L L L L L L 1
L L L L L L L L L L H L L L L L L L L 2
:
: :
: :
: L3…
L60
L L L L L L H H H H L H L L L L L L L61
Dark
↑
↓
Light L L L L L L H H H H H L L L L L L L L62
Gray
Scale of
Green
Green L L L L L L H H H H H H L L L L L L Green L63
Black L L L L L L L L L L L L L L L L L L L 0
L L L L L L L L L L L L L L L L L H L 1
L L L L L L L L L L L L L L L L H L L 2
:
: :
: :
: L3…
L60
L L L L L L L L L L L L H H H H L H L61
Dark
↑
↓
Light L L L L L L L L L L L L H H H H H L L62
Gray
Scale of
Blue
Blue L L L L L L L L L L L L H H H H H H Blue L63
Black L L L L L L L L L L L L L L L L L L L 0
L L L L L H L L L L L H L L L L L H L 1
L L L L H L L L L L H L L L L L H L L 2
:
: :
: :
: L3…
L60
H H H H L H H H H H L H H H H H L H L61
Dark
↑
↓
Light H H H H H L H H H H H L H H H H H L L62
Gray
Scale of
White &
Black
White H H H H H H H H H H H H H H H H H H White L63
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/
LTA057A343F
(8/8) 2008-4-17 (Ver.0.3R)
FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions.
In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions det ailed
in Engineerin g I n f o r mation No.EE-N001,"CAUTIONS AND INSTRUCTIO NS FOR T OSHIBA LC D M O DULES".
Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical
information.
1) SPECIAL PURPOSES
A) Toshiba Matsushita Display Technology's Standard LCD Modules have not been customized for operation in extreme
environments or for use in applications w here performance failures could be life-threatening or otherwise catastrophic.
B) Since Toshiba Matsushita Display Technology's Standard LCD Modules have not been designed for operation in extreme
environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which
exceed Toshiba Matsushita Display Technology's published spe cification limits.
C) In addition, since Toshiba Matsushita Display Technology Standard LCD Modules have not been designed for use in
applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft
navigation control systems (such as, but not limited to Traffic Collis ion Avoidance System and Air Traf fic Indicator), in military
defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear
energy), or in critical medical de vice or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause
scratches or dust on the display.
Toshiba Matsus hita Display Technology doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid cryst al mater ial, DO NOT INHALE this material, and DO NOT CONTA CT the material with skin, if LCD
panel is broken and liquid crystal material spills out.
If liquid cryst al material comes into mouth or eyes, rinse mouth or eyes out with water immediately.
If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module.
DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric
shock, because high volt age is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM R ATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage
variation, input voltage variat ion, variation in part s' constant s, environmental temperature, etc., otherwise LCD module may be
damaged.
Employ protection circuit for power supply, whenever the specification or TD specifies it.
Suitable protection circu it should be applied for each system design.
7) RECOMMENDED OPERATION CONDITIONS
The performance and quality of the LCD panel are warranted only when the LCD panel is used within “the recommended
operation conditions”. Toshiba Matsushita Display Technology Co., Ltd. never warrants the performance and quality of the
LCD panel w hen you use the LCD panel over “the recommended operation conditions”, although within “the absolute
maximum rating”.
To use the LCD panel over “the recommended operation conditions” may have bad influence on the characteristics and
reliability of the LCD panel and may shorten the life of the LCD panel.
Therefore, when designing the whole set, not to be over “the recommended operation cond itions”, you should fully t ake care of
supply volt age change, characteristic of connection parts, serge of input-and-output line, and surrounding temperature.
8) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
!
Support by :
www.glyn.de
www.glyn.com
www.DataSheet.co.kr
Datasheet pdf - http://www.DataSheet4U.net/