SSM-116-L-SV-BE-LC - Samtec Inc.

DO NOT

SCALE FROM

THIS PRINT

No OF POSITIONS

-02 THRU -36

(SEE NOTE 8)

POLARIZATION OPTION

-XX: POSITION TO BE POLARIZED

(USE PK-06-N, SEE FIG 7, SHT 2

FOR POLARIZATION POSITIONS)

(NOT AVAILABLE FOR -BE OPTION)

TAIL SPECIFICATION

-SV: SINGLE VERTICAL (SEE FIG 1)

(USE SSM-XX-S)

-SH: SINGLE HORIZONTAL (SEE FIG 3, SHT 2)

(USE SSM-XX-SH)

-DH: DOUBLE HORIZONTAL (SEE FIG 4, SHT 2)

(USE BCH-XX-D)

PLATING SPECIFICATION

-S: 30µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL.

-L: 10µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL.

-T: MATTE TIN ON CONTACT AND TAIL.

-F: 3µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL.

-STL: 30µ" SELECTIVE GOLD IN CONTACT

AREA, TIN/LEAD (90/10) ON TAIL.

-H: 30µ" SELECTIVE GOLD IN CONTACT

AREA, 3µ" SELECTIVE GOLD ON TAIL.

-LM: 10µ" SELECTIVE GOLD IN CONTACT

AREA, MATTE TIN ON TAIL.

-TM: MATTE TIN ON CONTACT AND TAIL.

-FM: 3µ" SELECTIVE GOLD IN CONTACT

OPTION

-BE: BOTTOM ENTRY

(ONLY AVAILABLE ON -SV)

(USE SSM-XX-S-BE)

(SEE FIG 2, SHT 2)

OPTION

-P: PICK AND PLACE PAD

(ONLY AVAILABLE ON -SV,

USE PPP-12, SEE FIG 6, SHT 2)

(SEE NOTE 12)

-K: POLYIMIDE FILM PAD

(SEE FIG 5, SHT 2)

(USE K-500-S00)

(NOT AVAILABLE ON -SH AND -DH)

MOUNTING OPTION

-LC: LOCKING CLIP

(USE LC-05-TM, SEE NOTE 10)

(FOR -SH AND -DH USE MOLDED TO

POSITION BODIES)

SSM-1XX-XXX-XX-XX-XX-X-XX-XX

.290

REF

7.37

"A"

SEE NOTE 9

.100

REF

2.54

(NO OF POS x .100[2.54])

±.008[0.20] (CUT TOLERANCE, SEE NOTE 11)

±.005[0.13] (MOLDED BODY TOLERANCE)

.050 1.27

REF

(NO OF POS x .100[2.54]) -.100[2.54]

(NO OF POS x .100[2.54]) -.200[5.08]

MAX SWAY

(EITHER DIRECTION)

SSM-XX-S

.18 4.6

.050 1.27

90°

0°

4°

MAX SWAY

(EITHER DIRECTION)

'D'

SECTION "A"-"A"

CONTACT #1

LC-05-TM

SEE NOTE 3

.043

.005

.002 1.09

0.127

0.051

-SV IN-PROCESS

FLUSH TO .005[0.13] MAX

DETAIL 'D'

SCALE 8 : 1

FIG 1

-SV: SINGLE VERTICAL ROW

(SSM-1XX-XXX-SV-LC SHOWN)

OPTION

-TR: TAPE AND REEL

(SEE FIG 8, SHT 3)

(29 POSITIONS MAX)

SHEET OF

UNLESS OTHERWISE SPECIFIED,

DIMENSIONS ARE IN INCHES.

TOLERANCES ARE:

DECIMALS ANGLES

.XX:

.01 [0.3] 2

.XXX:

.005 [0.13]

.XXXX:

.0020 [0.051]

MATERIAL:

.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP

BY:

SSM-1XX-XXX-XX-XX-XX-X-XX-XX

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

09/11/1998

SHEET SCALE: 2:1

INSULATOR: LCP, UL 94 VO, COLOR: BLACK

CONTACT: PHOS BRONZE

F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW

NOTES:

1. REPRESENTS A CRITICAL DIMENSION.

2. MINIMUM PUSHOUT FORCE: 1LB.

3. COPLANARITY TO BE:

-DH: -36 THRU -28 POS: .008[0.20]

-02 THRU -27 POS: .006[0.15]

-SV, SH: .006[0.15].

4. PACKAGE IN TUBES PER SHT 2, TABLE 2. ALL OTHER POSITIONS BULK PACKAGE.

5. MAXIMUM CUT FLASH: .015[0.38].

6. NOTCH OF PPP-12 TO BE ORIENTED TOWARD SAME END AS POSITION 1.

7. ROWS TO BE WITHIN .004[0.10] OF ONE ANOTHER.

8. -36 MAX POSITION AVAILABLE, -50 FOR STOCK ONLY.

9. ENDWALL AFTER CUTTING: .033[0.84]±.005[0.13]

10. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION

IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS

MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.

11. FOR -SV TAIL STYLE: EVEN CUTS LOSE 2 POSITIONS PER CUT; ODD CUTS

LOSE 1 POSITION PER CUT.

12.

IF POLARIZATION OCCURS AT CENTER POSITION(S) OF BODY, MOVE PICK &

PLACE PAD LEFT OR RIGHT TO NEXT AVAILABLE POSITION.

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

REVISION CI

MAX SWAY

(EITHER DIRECTION)

SSM-XX-S-BE

FIG 2

-SV-BE: SINGLE VERTICAL ROW BOTTOM ENTRY

(SSM-1XX-XXX-SV-BE SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

.320

REF

8.13

.020 0.51

REF

SSM-XX-SH

.125 3.18

.070

REF

1.78

"B"

3601

LC-05-TM

.433

.020

.010 11.00

0.508

0.254

.053

REF

1.35

.015 0.38

.055 1.40

90°

±3°

(TYP)

MAX SWAY

(EITHER DIRECTION)

SECTION "B"-"B"

CONTACT #1

SEE NOTE 3

.272

REF

6.91

BCH-XX-D

.233 5.92

.070

REF

1.78

.100 2.54

"C"

0272

.430

±.020

10.92

±0.508

.055

REF

1.40

.055 1.38

FLUSH TO

.008

[0.20] MAX

(SEE NOTE 7)

SECTION "C"-"C"

CONTACT #1

CONTACT #2

.078 1.98

.167 4.24

.064 1.63

.063 1.60

"R"

"S"

±.010[0.25]

.1378 3.500

FIG 5

-K: KAPTON PAD

(SSM-110-XXX-SV-K SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

"R" = SEE FIG 1, SHEET 1 FOR OAL

"S" = "R"/2 - .0689[1.750]

.295 7.49

"R"

.395 10.03

REF

"S"

±.010[0.25]

FIG 6

-P: PICK AND PLACE PAD

(SSM-110-XXX-SV-P SHOWN)

-02 AND -03 POS NOT AVAILABLE WITH POLARIZATION

-04 POS - CANNOT OFFER IF POLARIZATION IS POS 2 OR 3

-05 POS - CANNOT OFFER IF POLARIZATION IS POS 3

*MUST USE TR ON POS 2 & 3

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

"R" = SEE FIG 1, SHEET 1 FOR OAL

"S" = IF NO OF POS IS EVEN: "R"/2 - .1975[5.017]

IF NO OF POS IS ODD: "R"/2 - .2475[6.287]

POS 1

SEE NOTE 6

PPP-12

.050 1.27

REF

.195 4.95

REF

FIG 7

POLARIZATION

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

SSM-136-XXX-SV-02 SHOWN

PK-06-N

0272

PK-06-N

FIG 3

-SH: SINGLE HORIZONTAL

(SSM-136-XXX-SH-LC SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 1)

FIG 4

-DH: DOUBLE HORIZONTAL

(SSM-1XX-XXX-DH-LC SHOWN)

(DIFFERENT AS SHOWN, OTHERWISE SAME AS FIG 3)

-DH IN-PROCESS

-SH IN-PROCESS

SSM-136-XXX-SH-02 SHOWN

SSM-136-XXX-DH-02 SHOWN

3602

SHEET OF

.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP

BY:

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

09/11/1998

SHEET SCALE: 2:1

REVISION CI

F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

SSM-1XX-XXX-XX-XX-XX-X-XX-XX

SSM-110-XXX-SV-TR SHOWN

USER DIRECTION OF UNREELING

POS 1

SSM-110-XXX-SH-TR SHOWN

USER DIRECTION OF UNREELING

MATING SIDE

OF CONNECTOR

CONTACT ENTRY

SIDE FOR ASSEMBLY

SSM-110-XXX-DH-TR SHOWN

USER DIRECTION OF UNREELING

POS 1

CORE LEAD IN

SIDE OF BODY

STANDOFF

SIDE OF BODY

CORE LEAD IN

SIDE OF BODY

STANDOFF SIDE

OF BODY

1ST POSITION WITH TUBE LOGO

FIG 8

-TR: TAPE AND REEL

SCALE 1:1

SSM-1XX-XXX-DH-LC SHOWN

SSM-1XX-XXX-SH-LC SHOWN

SSM-1XX-XXX-SV-LC SHOWN

SSM-1XX-XXX-SV-LC-P SHOWN

(SSM-1XX-XXX-SV-LC-K SIMILAR)

FIG 9

TUBE VIEWS

SHEET OF

.100[2.54] C.L. SURFACE MOUNT SOCKET STRIP

BY:

DWG. NO.

DESCRIPTION:

PROPRIETARY NOTE

THIS DOCUMENT CONTAINS INFORMATION

CONFIDENTIAL AND PROPRIETARY TO

SAMTEC, INC. AND SHALL NOT BE REPRODUCED

OR TRANSFERRED TO OTHER DOCUMENTS OR

DISCLOSED TO OTHERS OR USED FOR ANY

PURPOSE OTHER THAN THAT WHICH IT WAS

OBTAINED WITHOUT THE EXPRESSED WRITTEN

CONSENT OF SAMTEC, INC.

DO NOT SCALE DRAWING

KOLB

09/11/1998

SHEET SCALE: 3:2

REVISION CI

F:\DWG\MISC\MKTG\SSM-1XX-XXX-XX-XX-XX-X-XX-XX-MKT.SLDDRW

520 PARK EAST BLVD, NEW ALBANY, IN 47150

PHONE: 812-944-6733 FAX: 812-948-5047

e-Mail info@SAMTEC.com code 55322

SSM-1XX-XXX-XX-XX-XX-X-XX-XX