DETAIL SPECIFIC ATION SHEET
CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING),
PLUG, (BAYONET COUPLING, CRIM P SOCKET CONTACT),
(SERIES III, CLASSES A, G, K, M, R, T, W AND Z)
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-DTL-83723.
FIGURE 1. Dimensions and configurations.
AMSC N/A FSC 5935
INCH-POUND
MIL-DTL-83723/75E
w/AMENDMENT 1
20 April 2011
SUPERSEDING
MIL-DTL-83723/75E
19 August 2009
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:05Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/75E
w/AMENDMENT 1
2
Shell
size A
dia
max
ins
G
dia
min
H
dia J
dia L
dia
min
U
dia
max
V
8
.312
.352 .415
.424
.540
.545
.632 .776 .025
10
.388 .428 .517
.526
.662
.667
.760 .906 .031
12
.558 .598 .687
.696
.832
.837
.930 1.078 .031
14
.627 .667 .756
.765
.901
.906
.999 1.141 .031
16
.772 .794 .883
.892
1.028
1.033
1.126 1.266 .031
18
.860 .900 .989
.998
1.134
1.139
1.232 1.375 .031
20
.985 1.025 1.114
1.123
1.261
1.266
1.357 1.510 .031
22
1.110 1.150 1.239
1.248
1.384
1.389
1.482 1.625 .031
24
1.235 1.275 1.364
1.373
1.511
1.516
1.607 1.760 .031
FIGURE 1. Dimensions and configurations - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:05Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/75E
w/AMENDMENT 1
3
Inches mm Inches mm Inches mm Inches mm Inches mm
.015
0.38
.185
4.70
.627
15.93
.906
23.01
1.239
31.47
.025
0.64
.200
5.08
.632
16.05
.930
23.62
1.248
31.70
.031
0.79
.206
5.23
.662
16.81
.985
25.02
1.261
32.03
.035
0.89
.210
5.33
.667
16.94
.989
25.12
1.266
32.16
.051
1.30
.312
7.92
.678
17.22
.998
25.35
1.275
32.39
.054
1.37
.320
8.13
.687
17.45
1.025
26.04
1.364
34.65
.076
1.93
.352
8.94
.696
17.68
1.028
26.11
1.373
34.87
.092
2.34
.366
9.30
.756
19.20
1.033
26.24
1.375
34.93
.093
2.36
.383
9.73
.760
19.30
1.078
27.38
1.384
35.15
.096
2.44
.388
9.86
.765
19.43
1.110
28.19
1.389
35.28
.105
2.67
.415
10.54
.772
19.61
1.114
28.30
1.482
37.64
.107
2.72
.424
10.77
.776
19.71
1.123
28.52
1.510
38.35
.114
2.90
.428
10.87
.794
20.17
1.126
28.60
1.511
38.38
.118
3.00
.517
13.13
.832
21.13
1.134
28.80
1.516
38.51
.125
3.18
.526
13.36
.837
21.26
1.139
28.93
1.607
40.82
.146
3.71
.540
13.76
.860
21.84
1.141
28.98
1.625
41.28
.150
3.81
.545
13.84
.883
22.43
1.150
29.21
1.760
44.70
.170
4.32
.552
14.02
.892
22.66
1.230
31.24
.177
4.50
.558
14.17
.900
22.86
1.232
31.29
.182
4.62
.598
15.19
.901
22.89
1.235
31.37
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for information only.
3. Unless otherwise specified, tolerances are ± .005 inches (0.13 mm) for three place decimals,
± .01 inches (0.25 mm) for two place decimals and ± 1o for all angles.
4. Rear accessory interchangeability dimensions shall be in accordance with MIL-DTL-83723.
5. See table I for contact cavities requiring this dimension.
FIGURE 1. Dimensions and configurations - Continued.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:05Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/75E
w/AMENDMENT 1
4
REQUIREMENTS:
Dimensions and configurations: See figure 1.
For insert arrangements, see MIL-STD-1554 and table I.
TABLE I. Inserts requiring reduced diameters for lead-in chamfers on contact cavities.
Shell
size
Insert
Arrangements
Contact
cavities
8
03
1, 2, 3
10
06
1, 2, 3, 4, 5, 6
For connector accessories: See SAE-AS85049.
This connector mates with MIL-DTL-83723/72, /74, /80, /81, /93 and /94.
Part or Identifying Number (PIN) example:
M83723/ 75 W 22 55 N
Military designator
Specification sheet number
Class
Shell size
Insert arrangement
Polarizing position
Amendment Notations. The margins of this specification are marked with vertical lines to indicate
modifications generated by this amendment. This was done as a convenience only and the Government
assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are
cautioned to evaluate the requirements of this document based on the entire content irrespective of the
marginal notations.
Referenced documents. In addition to MIL-DTL-83723, this document references the following:
MIL-DTL-83723/72
MIL-DTL-83723/74
MIL-DTL-83723/80
MIL-DTL-83723/81
MIL-DTL-83723/93
MIL-DTL-83723/94
MIL-STD-1554
SAE-AS85049
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:05Z
Check the source to verify that this is the current version before use.
MIL-DTL-83723/75E
w/AMENDMENT 1
5
CONCLUDING MATERIAL
Custodians: Preparing activity:
Army - CR DLA - CC
Navy - AS
Air Force - 85 (Project 5935-2011-017)
DLA - CC
Review activities:
Army - AR, MI
Navy - EC
Air Force – 19, 99
NOTE: The activities listed above were interested in this document as of the date of this document. Since
organizations and responsibilities can change, you should verify the currency of the information above
using the ASSIST Online database at https://assist.daps.dla.mil.
Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:05Z
Check the source to verify that this is the current version before use.
