PCB Mounted Receptacle Assemblies 2.54 mm (0.100in.) Ordering Data Base number specifies connector style I _ Number of positions (see table) OoOoOoOoO-xvyvyvz < Plating Options J Lo Tail Length Replace X in Replace Z in dash number dash number with: with: 1- 1.27 um (50 vin) Ni under all; with .76 um E - 3.18 mm (0.125in) (30 pin) Au on contact area, and SnPb F - 3.68 mm (0.145in) on PCB interface. Au flash all other H - 4.57 mm (0.180in) areas. 5 - 1.27 pm (50 pin) Ni under all; with .76 um (30 pin) GXT on contact area, and SnPb on PCB interface. Au flash all other areas. _ Base Number Option Menu. =. Base Number Style Platings Available Tail Length 50295 Standard Housing, Solder Tail 1,5 E,F,H 50576 Generic Housing, Solder Tail 1,5 E,F,H 50642 Standard Housing, Solderless Tail (Press Fit) Installation Tooling 1 E, F Required, see Page 17-53 Dash Number... | Dimensions Number of | Dash Number A Positions (XYYYZ) - mm in. 40 X040Z 44.45 1.750 44 X044Z 46.99 1.850 48 X048Z 49.53 1.950 52 XO52Z 52.07 2.050 @: 56. X056Z 54.61 | > 2.450 7; 60 X060Z 57.15 2.250 64 X064Z 59.69 2.350 68 X068Z 62.23 2.450 q 72 X072Z2 64.77 2.550 76 X076Z 67.31 | 2650 *| 80 X080Z 69.85 2.750 One contact powered........... 3.0 amp continuous per contact Customer Support Materials Description Order No. Description Order No. Customer Product Drawings............... By Part No. Product Specifications ................... BUS-12-111 Product Specifications..................-. BUS-12-090 Product Samples................00000s Upon Request M@ 9005411 0002702 255 a 17-18 HPC Berg Electronics 1-800-237-2374