Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com The ACTR8007/868.75/QCC8C is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic QCC8C case. It provides reliable, fundamental-mode, quartz frequency stabilization i.e. in transmitters or local oscillators operating at 868.750 MHz. 1.Package Dimension (QCC8C) 2. Pin Configuration 2 Input / Output 6 Output / Input 4,8 Case Ground 1,3,5,7 NC Sign Data (unit: mm) Sign Data (unit: mm) A 2.08 E 1.2 B 0.6 F 1.35 C 1.27 G 5.0 D 2.54 H 5.0 3.Equivalent LC Model and Test Circuit 4.Typical Application Circuits 1) Low-Power Transmitter Application 2) Local Oscillator Application In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 5.Typical Frequency Response 6.Temperature Characteristics 7.Performance 7-1.Maximum Ratings Rating Value Unit 0 dBm CW RF Power Dissipation P DC Voltage Between Terminals VDC 30 V Storage Temperature Range Tstg -40 to +85 C Operating Temperature Range TA -10 to +60 C In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: info@actcrystals.com 7-2.Electronic Characteristics Characteristic Centre Frequency (+25C) Sym Minimum Absolute Frequency fC 868.600 Tolerance from 868.750 MHz fC 150 IL 1.8 Unloaded Q QU 8,550 50 Loaded Q QL 1,600 Turnover Temperature T0 Turnover Frequency f0 fC FTC 0.032 |fA| 10 Insertion Loss Quality Factor Temperature Stability Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year DC Insulation Resistance Between Any Two Terminals RF Equivalent RLC Model Typical 25 Maximum Unit 869.900 MHz kHz 2.4 dB C 55 kHz ppm/C 2 ppm/yr 1.0 M RM 23 Motional Inductance LM 36.0720 H Motional Capacitance CM 0.9314 fF Shunt Static Capacitance C0 2.00 2.25 32 Motional Resistance 2.50 pF iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. 7. 8. 9. The centre frequency, f C, is measured at the minimum IL point with the resonator in the 50 test system. Unless noted otherwise, case temperature T C = +25C2C. Frequency aging is the change in f C with time and is specified at +65C or less. Aging may exceed the specification for prolonged temperatures above +65C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f 0. The nominal frequency 2 at any case temperature, T C, may be calculated from: f = f 0 [1 - FTC (T 0 - TC) ]. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C 0 is the measured static (non-motional) capacitance between the two terminals. The measurement includes case parasitic capacitance. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB bandwidth, fC versus TC, and C 0. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 3 Issue : 1 C1 Date : SEPT 04