Varicon(R) Series 8218 - 0.050" Staggered Dual Row FEATURES * * * * * * High contact density For parallel or perpendicular p.c. card mounting High mounting density (.050" centers, minimum) Nylon end sections for mounting and card guidance Mounting hardware supplied with connector Mates with 8219 Series TECHNICAL SPECIFICATIONS Current Rating: 5 amperes, maximum Contact Resistance: 0.005 ohm, maximum Contact Material and Plating: Phosphor Bronze nickel plate, 30 to 50 microinches followed by gold plate, 10 to 20 microinches Insulator Material: Diallyl phthalate, glass-filled, flame resistant, end guides: nylon Dielectric Withstanding Voltage: Sea Level: 1000 Volts rms 3.4" Hg: 500 Volts rms Insulation Resistance: 5,000 megohms, minimum Insertion/Withdrawal Force: 2 to 16 ounces per contact ORDERING CODE 00 8218 076 Number of Contacts 002 to 076 for connectors without center guide 000 Contact Code Variant 002 right angled contacts 000 = 60 8200 16 33 P.C. Tail 000 = 60 8200 16 63 P.C. Tail Variants 001 and 005 722 = 60 8200 16 13 Wire Hole Tail 736 = 60 8200 16 33 P.C. Tail (X = 9/32", Y = 1/4") 753 = 60 8200 16 53 P.C. Tail (X = 1/8", Y = 3/32") 771 = 60 8200 16 63 P.C. Tail (X = 31/64", Y = 29/64") 32 001 Variation Code 001 = Receptacle 002 = Plug-Card 005 = Plug-Board with keying pins with keying holes 011 = Receptacle 021 = Receptacle 012 = Plug-Card/pin 022 = Plug-Card/pin inserted in inserted in odd position odd position 013 = Plug-Card/pin 023 = Plug-Card/pin inserted in even inserted in even position position 017 = Plug-Board 027 = Plug-Board Varicon(R) Series 8218 - 0.050" Staggered Dual Row Receptacle Variation 001 Plug Variation 002 Plug Variation 005 RECEPTACLE 001 - MATES WITH PLUGS 002 AND 005 MOUNTING LAYOUT Variation 001 and 005 Variation 002 Minimum Center to Center Spacing for Adjustment Plugs DIMENSIONS (inches) A B C D E (No. of contacts x 0.050") - 0.050" "A" dimension + 0.300" "A" dimension + 0.440" "A" dimension + 0.550" "A" dimension + 0.690" POLARIZATION Keying Ordering No. 60-8218-4715-00-152 Determine polarization pin location from views. P = Specify location by contact # where polarizing pin must be inserted. H = Specify location by contact # where contact must be omitted for mating. Typical Example: 00-8218-024-721-001-P17 (polarizing pin mtd. in position 17) 00-8218-024-721-005-H17 (polarizing hole is in position 17) 33