HMC156AC8 v00.1210 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT Typical Applications Features The HMC156AC8 is suitable for: Conversion Loss: 15 dB * Wireless Local Loop Fo, 3Fo, 4Fo Isolation: 38 dB * LMDS, VSAT, and Point-to-Point Radios Input Drive Level: 10 to 20 dBm * UNII & HiperLAN Freq. Multipliers - PASSIVE - SMT 5 * Test Equipment Functional Diagram General Description The HMC156AC8 is a miniature frequency doubler in a non-hermetic ceramic surface mount package. Suppression of undesired fundamental and higher order harmonics is 38 dB typical with respect to input signal levels. The doubler uses the same diode/balun technology used in Hittite MMIC mixers, features small size and requires no DC bias. Electrical Specifications, TA = +25 C, As a Function of Drive Level Input = +10 dBm Parameter Min. Input = +15 dBm Max. Min. Typ. Input = +20 dBm Max. Min. Typ. Max. Units Frequency Range, Input 1.1 - 2.1 0.8 - 2.4 0.7 - 2.3 GHz Frequency Range, Output 2.2 - 4.2 1.6 - 4.8 1.4 - 4.6 GHz Conversion Loss 5-1 Typ. 17 22 15 20 15 20 dB FO Isolation (with respect to input level) 42 47 43 47 27 35 dB 3FO Isolation (with respect to input level) 45 55 44 55 29 40 dB 4FO Isolation (with respect to input level) 28 38 31 38 25 35 dB Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC156AC8 v00.1210 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT Conversion Gain vs. Drive Level Isolation @ +15 dBm Drive Level* 0 -20 -20 -30 Input = 10 dBm Input = 15 dBm Input = 20 dBm -40 5 -60 Fo 3Fo 4Fo -80 -100 -40 1 1.5 2 2.5 3 3.5 4 4.5 0 5 2 4 6 8 10 FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) *With respect to input level Output Return Loss @ +15 Drive Level 0 0 -5 -4 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss vs. Drive Level -10 -15 Input = 10 dBm Input = 15 dBm Input = 20 dBm -20 -8 -12 -16 -25 -20 0 0.5 1 1.5 2 2.5 3 3.5 4 INPUT FREQUENCY (GHz) 0 1 2 3 4 5 OUTPUT FREQUENCY (GHz) Absolute Maximum Ratings Input Drive +27 dBm Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Freq. Multipliers - PASSIVE - SMT -10 ISOLATION (dB) CONVERSION GAIN (dB) 0 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 5-2 HMC156AC8 v00.1210 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT Pin Descriptions Freq. Multipliers - PASSIVE - SMT 5 5-3 Pin Number Function Description 1, 3 - 6, 8 GND All ground leads must be soldered to PCB RF/DC ground. 2 RFIN Pin is DC coupled and matched to 50 Ohms. 7 RFOUT Pin is DC coupled and matched to 50 Ohms. Interface Schematic Outline Drawing NOTES: 1.PACKAGE BODY MATERIAL: WHITE ALUMINA 92% 2.LEAD, PACKAGE BOTTOM MATERIAL: COPPER 3.PLATING: ELECTROLYTIC GOLD 100 - 200 MICROINCHES OVER ELECTROLYTIC NICKEL 100 TO 200 MICROINCHES. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5.PACKAGE LENGTH AND WIDTH DIMENSIONS DO NOT INCLUDE LID SEAL PROTRUSION .005 PER SIDE. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB PF GROUND. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC156AC8 v00.1210 GaAs MMIC SMT PASSIVE FREQUENCY DOUBLER, 0.7 - 2.4 GHz INPUT Evaluation PCB List of Materials for Evaluation PCB 107196 [1] Item Description J1, J2 PCB Mount SMA Connector U1 HMC156AC8, Doubler PCB [2] 107165 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com * Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com Freq. Multipliers - PASSIVE - SMT 5 5-4