R A D I A L - L E A D E D D E V I C E S F O R E L E C T R O N I C S A P P L I C AT I O N S 16V Figure 10 Figure 9 The RUSB series devices were developed for the USB serial bus specification for computer and multimedia applications. A Marking B Lead size RUSB090-250 O 0.51 (0.020) 24 AWG C Part number RUSB090 RUSB110 RUSB135 RUSB160 RUSB185 RUSB250 IH (A) 0.90 1.10 1.35 1.60 1.85 2.50 V max. (V) 16 16 16 16 16 16 I max.** (A) 40 40 40 40 40 40 R1max. () 0.18 0.14 0.12 0.11 0.09 0.06 A Marking B Lead size RGE300-RGE1100 O 0.81 (0.032) 20 AWG Lead size RGE1200-RGE1400 O 1.0 (0.04) 18 AWG C Agency recognition UL, TUV, CSA UL, TUV, CSA UL, TUV, CSA UL, TUV, CSA UL, TUV, CSA UL, TUV, CSA Dimensions (millimeters/inches) A B (max.) (max.) 12.2 (0.48) 7.4 (0.29) 7.4 (0.29) 14.2 (0.56) 8.9 (0.35) 13.5 (0.53) 8.9 (0.35) 15.2 (0.60) 10.2 (0.40) 15.7 (0.62) 11.4 (0.45) 18.3 (0.72) C (nom.) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) Agency recognition Dimensions (millimeters/inches) A B (max.) (max.) C (nom.) 9 9 9 9 9 9 The RGE series devices are rated for 16V and have hold current ranges of 2.5A to 14A. These parts are smaller and trip faster than the RUE devices with the same hold currents. In addition, they have tight trip-to-hold ratios. If the application requires 16V rather than 30V and there are limitations on space, the RGE devices can be the preferred choice. Like the RXE and RUE series devices, the RGE devices are used in many markets including computer/multimedia, industrial equipment and controls, consumer and general electronics, as well as motor protection. Part number IH* (A) V max. (Vdc) I max.** (A) R1max. () RGE250 2.5 16 100 0.0530 8.9 (0.35) 12.8 UL, TUV, CSA 3.0 7.1 (0.28) RGE300 16 100 0.0980 UL, TUV, CSA 11.0 4.0 8.9 (0.35) RGE400 16 100 0.0600 UL, TUV, CSA 12.8 5.0 10.4 (0.41) RGE500 16 100 0.0340 UL, TUV, CSA 14.3 6.0 10.7 (0.42) RGE600 16 100 0.0280 UL, TUV, CSA 17.1 7.0 11.2 (0.44) RGE700 16 100 0.0220 UL, TUV, CSA 19.7 8.0 12.7 (0.50) RGE800 16 100 0.0175 UL, TUV, CSA 20.9 9.0 14.0 (0.55) RGE900 16 100 0.0135 UL, TUV, CSA 21.7 16.5 (0.65) RGE1000 16 100 0.0102 UL, TUV, CSA 25.2 10.0 17.5 (0.69) RGE1100 16 100 0.0089 UL, TUV, CSA 26.0 11.0 17.5 (0.69) RGE1200 16 100 0.0086 UL, TUV, CSA 28.0 12.0 23.5 (0.92) RGE1400 14.0 16 100 0.0064 UL, TUV, CSA 27.9 *Hold current @ 25C. **Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. 6V (0.50) (0.50) (0.56) (0.67) (0.78) (0.82) (0.85) (0.99) (1.02) (1.10) (1.10) (1.10) 5.8 5.08 5.08 5.08 5.08 5.08 5.08 5.08 5.08 5.08 10.20 10.20 (0.23) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.20) (0.40) (0.40) 9 10 10 10 10 10 10 10 10 10 10 10 Figure 11 A The RUSB series devices were developed for the USB serial bus specification for computer and multimedia applications. These 6V products are particularly well suited for USB computer monitor protection applications where through-hole devices are still the preferred solution. Marking B Lead size RUSB-6V products O 0.51 (0.020) 24 AWG C Part number RUSB075 RUSB120 RUSB155 IH (A) 0.75 1.20 1.55 V max. (Vdc) 6 6 6 I max.** (A) 40 40 40 R1max. () 0.23 0.14 0.10 Agency recognition UL, TUV, CSA UL, TUV, CSA UL, TUV, CSA Dimensions (millimeters/inches) A B (max.) (max.) 6.9 (0.27) 11.4 (0.45) 6.9 (0.27) 11.7 (0.46) 6.9 (0.27) 11.7 (0.46) **Device may withstand higher interrupt current at lower voltages. Each application will need to be individually evaluated. 4 C (nom.) 5.08 (0.20) 5.08 (0.20) 5.08 (0.20) Fig. 11 11 11