C4DE MKP Series LOW INDUCTANCE CAPACITORS DC-LINK APPLICATIONS GENERAL TECHNICAL DATA Reference Standards: IEC 61071 - EN 61071 Dielectric: Metallized polypropylene film Winding: Non-inductive type Case: Self extinguishing plastic case UL94 V0 Terminals: M6 or M8 threaded bolt; also available with threaded female connections Construction: dry construction, filled by solid resin IEC climatic category: 40/85/21 according to IEC 68-1 Temperature range (Case): -40 to +85 C Temperature storage: -40 to +105C O840.5 451 M8 1 5 H1 (H+25)2 20 O10 5 O16 5 5. O 10 5 0. 1 TEST METHODS AND PERFORMANCES 1.5*Un for 10 s at 25C Test voltage terminal to case (UTC) 3 KV 50Hz for 2 sec. Capacitance deviation in temperature range (-25..+85C) 1,5% max on capacitance value at 20C Installation Whatever position 71.4 Test voltage terminal to terminal (UTT) 71.4 ELECTRICAL CHARACTERISTICS Capacitance 47 to 380 F Tolerance 10 % Rated Voltage 400 to 1000 Vdc dv/dt 15 to 37 V/s Repetitive Peak Current 1739 to 5700 Ap ESR 0.5 to 1.3 m (at repetition frequency 10KHz) ESL 25 to 40 nH 1.2 x Vr @ 85C 1.000 hours 1 x Vr @ 85C 10.000 hours 0.9 x Vr @ 85C 100.000 hours For working temperature between +85C and +70C an increasing factor of 0.67 on the rated Lifetime has to be applied. Derated Voltage and Lifetime expectancy: Derated Temperature and Lifetime expectancy Diameter / Packing Unit 84mm / 12pcs Vdc C H ESL ESR @ 10 kHz DV/dt IPKR V F mm nH m V/us A C4DEFPQ6175A8TK 400 175 40 25 0.50 25 C4DEFPQ6260A8TK 400 260 51 32 0.62 20 C4DEFPQ6380A8TK 400 380 64 40 0.81 15 C4DEHPQ6100A8TK 600 100 40 25 0.60 C4DEHPQ6150A8TK 600 150 51 32 C4DEHPQ6220A8TK 600 220 64 C4DEIPQ5680A8TK 800 68 C4DEIPQ6100A8TK 800 100 C4DEIPQ6140A8TK 800 C4DENPQ5470A8TK 1000 C4DENPQ5680A8TK C4DENPQ6100A8TK Code Irms @ 10 kHz Ambient Temperature Weight gr 25C 45C 65C 85C 4375 100 100 80 46 283 5200 100 100 77 45 349 5700 100 94 73 42 419 30 3000 100 93 72 42 286 0.75 25 3750 100 90 70 40 353 40 1.00 20 4400 100 85 65 38 424 40 25 0.70 35 2380 100 87 68 40 284 51 32 0.90 30 3000 100 84 65 37 350 140 64 40 1.20 25 3500 91 77 60 35 425 47 40 25 0.80 37 1739 96 81 63 36 282 1000 68 51 32 1.10 32 2176 92 77 60 35 352 1000 100 64 40 1.30 27 2700 86 72 56 32 422 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. 26