P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. CERAFILr (Filters/Traps/Discriminators) for Audio/Visual Equipment CERAFILr 10.7MHz for FM-IF Tuners 9.0 max. SFELA10M7 series for FM-receivers are monolithic type ceramic filters which use the thickness expander mode of the piezoelectric ceramic. EIAJ CODE 2.50.2 2.50.2 (3) (2 ) (in mm) 10. 0 ma x. MARKING EIAJ CODE 5.0 1.0 1. 38 0.2 1. 70 .1 0.5 0. 1 (3) (2 ) ( 1) (in mm) 9.0 max. 11 .0 max. 7.02.0 MARKING EIAJ CODE EIAJ CODE 5.01.0 0.5 0. 1 (1) : Input (2) : Ground (3) : Output SFELA10M7GAXX-B0 2.50.2 2.50.2 (in mm) (3) (1) (2) (2) (in mm) 1.380.2 1.70.1 0.50.1 2.50.2 2.50.2 (1) : Input (2) : Ground (3) : Output (in mm) SFELA10M7GALP03-B0 0.30.1 2.50.2 2.50.2 4.0 max. (1 ) 5.01.0 0. 50.1 7.02.0 EIAJ CODE 5 .0 1.0 1. 380. 2 1. 70. 1 MARKING 3.01.0 EI AJ CODE 11.0 m ax. MARKING (2 ) (1 ) 7.02.0 9. 0 ma x. (3) (1) : Input (2) : Ground (3) : Output 4.0 max. 3.01.0 0.30.1 2.50.2 2.50.2 0. 30 .1 0.50.1 5. 01 .0 1. 38 0.2 1. 70 .1 1.380.2 1.70.1 (3) (1) : Input (2) : Ground (3) : Output 4.0 max. SFELA10M7HAXD-B0 2.50.2 2.50.2 MARKING 0.3 0.1 (1) 9.0 max. 7.02.0 SFELA10M7HA0G-B0 (1) : Input (2) : Ground (3) : Output 4.0 max. SFELA10M7JAXE-B0 0.3 0.1 0.5 0. 1 0.3 0.1 1. Little dispersion of amplitude characteristics and phase characteristics (G. D. T. characteristics) 2. The SFELA10M7G_X series has G. D. T. characteristics and is useful for obtaining low distortion. SFELA10M7F_L series, in these ceramic filters, being in harmony with flatness of G. D. T., roundness of the amplitude and selectivity characteristics, therefore, these ceramic filters are suitable to high-grade stereo tuners. Even in mismatching conditions, they can keep little distortion because of low Qm of ceramic material. The SFELA10M7FA0G series is based on SFELA10M7FA00/GA00/HA00, and it obtains high selectivity with low loss. There is little dispersion of amplitude and G. D. T. characteristics, and low distortion rate can be obtained. 3. All products are inspected the flatness of G. D. T. characteristics. 5.0 1.0 1. 38 0.2 1. 70 .1 Features SFELA10M7GAXA-B0 10. 0 ma x. MARKING (3) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) Continued on the following page. 31 10 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. 7.02.0 MARKING MARKING EIAJ CODE 7.02.0 7.02.0 EIAJ CODE 0.50.1 0.50.1 (3) 7.02.0 MARKING MARKING EIAJ CODE 0.50.1 SFELA10M7FA0G-B0 (in mm) (1) Center 3dB Bandwidth Frequency (fo) (kHz) (MHz) 3.01.0 3.01.0 (2) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 (3) 5.01.0 0.50.1 Part Number (in mm) 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 (1) : Input (2) : Ground (3) : Output (1) (2) 7.02.0 EIAJ CODE SFELA10M7FALL-B0 3.01.0 (in mm) (1) (2) 7.02.0 10 SFELA10M7GA0G-B0 7.02.0 3.01.0 (3) (1) : Input (2) : Ground (3) : Output 0.30.1 2.50.2 2.50.2 0.30.1 2.50.2 2.50.2 SFELA10M7GALM-B0 5.01.0 1.380.2 1.70.1 5.01.0 1.380.2 1.70.1 7.02.0 Continued from the preceding page. (3) Insertion Spurious Loss Attenuation (dB) (dB) Attenuation (kHz) (2) (1) : Input (2) : Ground (3) : Output (in mm) (1) GDT Bandwidth (kHz) Input/Output Impedance (ohm) SFELA10M7JAXE-B0 10.700 30kHz 150 30kHz 500 max. 14.0 max. 35 min. fo50 min.[within 0.15sec.] 330 SFELA10M7HAXD-B0 10.700 30kHz 180 30kHz 530 max. 14.0 max. 33 min. fo60 min.[within 0.15sec.] 330 SFELA10M7HA0G-B0 10.700 30kHz 180 40kHz 520 max. 7.0 max. 40 min. fo45 min.[within 0.5sec.] 330 SFELA10M7GAXX-B0 10.700 30kHz 250 40kHz 670 max. 12.0 max. 25 min. fo110 min.[within 0.2sec.] 330 SFELA10M7GAXA-B0 10.700 30kHz 220 40kHz 610 max. 12.5 max. 30 min. fo80 min.[within 0.15sec.] 330 SFELA10M7GALP03-B0 10.700 30kHz 250 50kHz 650 max. 10.0 max. 30 min. fo65 min.[within 0.25sec.] 330 SFELA10M7GALM-B0 10.700 30kHz 230 50kHz 600 max. 9.0 2.0dB 30 min. fo60 min.[within 0.25sec.] 330 SFELA10M7GA0G-B0 10.700 30kHz 230 50kHz 600 max. 7.0 max. 40 min. fo60 min.[within 0.5sec.] 330 SFELA10M7FALL-B0 10.700 30kHz 280 50kHz 700 max. 7.0 2.0dB 25 min. fo70 min.[within 0.25sec.] 330 SFELA10M7FA0G-B0 10.700 30kHz 280 50kHz 650 max. 4.0 2.0dB 30 min. fo85 min.[within 0.5sec.] 330 Attenuation Bandwidth : at 20dB loss point Area of Spurious Attenuation : [within 9MHz to 12MHz] Insertion Loss: at minimum loss point Center frequency (fo) defined by the center of 3dB bandwidth. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. Standard Center Frequency Rank Code CODE 30kHz Step 25kHz Step Color Code D 10.64MHz30kHz 10.650MHz25kHz Black B 10.67MHz30kHz 10.675MHz25kHz Blue A 10.70MHz30kHz 10.700MHz25kHz Red C 10.73MHz30kHz 10.725MHz25kHz Orange E 10.76MHz30kHz 10.750MHz25kHz White Z Combination A,B,C,D,E M Combination A,B,C Continued on the following page. 32 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Test Circuit (1) R1 (2) (1) : Input (2) : Output (3) :Ground (3) RF Rg R2 Voltmeter C S.S.G Rg + R1 = R2 = Input and Output Impedance C = 10pF (Including stray capacitance and input capacitance of RF voltmeter.) Frequency Characteristics 10 5.00 0 4.50 1 4.75 1 4.25 2 4.50 2 4.00 3 4.25 3 3.75 4 4.00 4 3.50 5 3.75 5 3.25 6 3.50 6 3.00 3.25 7 0 6.00 0 3.25 1 5.50 1 3.00 2 5.00 2 2.75 3 4.50 3 2.50 4 4.00 4 2.25 5 3.50 5 2.00 6 3.00 6 1.75 2.50 7 0 3.75 0 3.75 1 3.50 1 3.50 2 3.25 2 3.25 3 3.00 3 3.00 4 2.75 4 2.75 5 2.50 5 2.50 6 2.25 6 2.25 2.00 7 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.500 10.600 10.700 Frequency (MHz) 10.800 10.800 10.900 2.75 10.600 10.700 Frequency (MHz) 10.800 10.900 1.50 10.900 Attenuation (dB) Attenuation (dB) SFELA10M7GALP03-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7GAXA-B0 7 10.700 Frequency (MHz) SFELA10M7GAXX-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7HA0G-B0 10.600 G.D.T. (sec.) 10.500 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) 7 Attenuation (dB) 0 G.D.T. (sec.) SFELA10M7HAXD-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7JAXE-B0 2.00 Continued on the following page. 33 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics 6.00 1 3.75 1 5.50 2 3.50 2 5.00 3 3.25 3 4.50 4 3.00 4 4.00 5 2.75 5 3.50 6 2.50 6 3.00 2.25 7 0 3.25 0 5.00 1 3.00 1 4.50 2 2.75 2 4.00 3 2.50 3 3.50 4 2.25 4 3.00 5 2.00 5 2.50 6 1.75 6 2.00 1.50 7 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 Attenuation (dB) 0 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) SFELA10M7GA0G-B0 4.00 G.D.T. (sec.) Attenuation (dB) SFELA10M7GALM-B0 0 2.50 10 7 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 10.500 10.600 10.700 Frequency (MHz) 10.800 10.900 G.D.T. (sec.) Attenuation (dB) SFELA10M7FA0G-B0 G.D.T. (sec.) Attenuation (dB) SFELA10M7FALL-B0 1.50 Frequency Characteristics (Spurious) SFELA10M7HAXD-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7JAXE-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.100 12.700 40 50 10.300 11.700 30 50 70 9.900 10.700 Frequency (MHz) SFELA10M7GAXX-B0 0 Attenuation (dB) Attenuation (dB) SFELA10M7HA0G-B0 9.700 11.500 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 Continued on the following page. 34 P50E.pdf 03.4.16 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specificaions transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics (Spurious) SFELA10M7GALP03-B0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7GAXA-B0 0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 9.700 10.700 Frequency (MHz) 11.700 12.700 10 SFELA10M7GA0G-B0 0 0 10 10 20 20 Attenuation (dB) Attenuation (dB) SFELA10M7GALM-B0 30 40 30 40 50 50 60 60 70 8.700 9.700 10.700 Frequency (MHz) 11.700 70 8.700 12.700 0 10 10 20 20 30 40 60 60 10.700 Frequency (MHz) 11.700 12.700 40 50 9.700 11.700 30 50 70 8.700 10.700 Frequency (MHz) SFELA10M7FA0G-B0 0 Attenuation (dB) Attenuation (dB) SFELA10M7FALL-B0 9.700 12.700 70 8.700 9.700 10.700 Frequency (MHz) 11.700 12.700 35