https://www.phoenixcontact.com/us/products/2708410
09/05/2014Page1/6
FO converters-PSI-MOS-RS232/FO 660 T-2708410
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
FO converter with integrated optical diagnosis, alarm contact, for RS-232 interfaces up to 115.2 kbps, T-coupler
with two FO interfaces (FSMA), 660 nm, for polymer/HCS fiber cable
Product Features
Connections can be plugged in using a COMBICON screw terminal block
Supply voltage and data signals routed through via DIN rail connectors
Redundant power supply possible by means of optional system power supply unit
High-quality electrical isolation between all interfaces (RS-232 // fiber optic ports // power supply // DIN rail connector)
Approved for use in zone 2
Integrated optical diagnostics for continuous monitoring of fiber optic paths
Intrinsically safe fiber optic interface (Ex op is) for direct connection to devices in zone 1
Floating switch contact for leading alarm generation in relation to critical fiber optic paths
Automatic data rate detection for all data rates up to 115.2 kbps
Key commercial data
Packing unit 1 pc
Weight per Piece (excluding packing) 234.0 GRM
Custom tariff number 85176200
Country of origin Germany
Technical data
Note
Utilization restriction EMC: class A product, see manufacturer's declaration in the download
area
Dimensions
Width 35 mm
https://www.phoenixcontact.com/us/products/2708410
09/05/2014Page2/6
FO converters-PSI-MOS-RS232/FO 660 T-2708410
Technical data
Dimensions
Height 99 mm
Depth 105 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Permissible humidity (operation) 30 % ... 95 % (non-condensing)
Altitude 5000 m (For restrictions see manufacturer's declaration)
Degree of protection IP20
Noise immunity EN 61000-6-2:2005
General
Transmission channels 2 (1/1), RxD, TxD, full duplex
Bit distortion, input ± 35 % (permitted)
Bit distortion, output < 6.25 %
Electrical isolation VCC // V.24 (RS-232)
Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Noise emission EN 55011
Net weight 200 g
Housing material PA 6.6-FR
Color green
MTBF 284 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5
days a week, 8 hours a day))
53 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle
(5 days a week, 12 hours a day))
Conformance CE-compliant
ATEX II 3 G Ex nAC IIC T4 X (Please follow the special installation instructions
in the documentation!)
II (2) GD [Ex op is] IIC (PTB 06 ATEX 2042 U) (Please follow the special
installation instructions in the documentation!)
UL, USA / Canada Class I, Zone 2, AEx nc IIC T5
Class I, zone 2, Ex nC nL IIC T5 X
Class I, Div. 2, Groups A, B, C, D
Power supply
Supply voltage range 18 V DC ... 30 V DC
Max. current consumption 120 mA
Typical current consumption 100 mA (24 V DC)
Connection method COMBICON plug-in screw terminal block
https://www.phoenixcontact.com/us/products/2708410
09/05/2014Page3/6
FO converters-PSI-MOS-RS232/FO 660 T-2708410
Technical data
Serial interface
Interface 1 V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1
Connection method D-SUB-9 plug
Transmission medium Copper
Transmission length ≤ 15 m
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 24
Conductor cross section AWG/kcmil max 14
Serial transmission speed 115.2 kbps (NRZ)
Optical interface FO
Transmit capacity, minimum -4.6 dBm (980/1000 µm)
-16.6 dBm (200/230 µm)
Minimum receiver sensitivity -31.2 dBm
Wavelength 660 nm
Transmission length incl. 3 dB system reserve 100 m (With F-P 980/1000 230 dB/km with quick mounting connector)
800 m (With F-K 200/230 10 dB/km with quick mounting connector)
Transmission medium Polymer fiber
HCS fiber
Transmission protocol Transparent to protocol for RS-232 interface
Connection method F-SMA
Digital outputs
Output name Relay output
Output description Alarm output
Number of outputs 1
Maximum switching voltage 60 V DC
42 V AC
Limiting continuous current 0.46 A
Classifications
eCl@ss
eCl@ss 4.0 27230207
eCl@ss 4.1 27230207
eCl@ss 5.0 27230207
https://www.phoenixcontact.com/us/products/2708410
09/05/2014Page4/6
FO converters-PSI-MOS-RS232/FO 660 T-2708410
Classifications
eCl@ss
eCl@ss 5.1 27230207
eCl@ss 6.0 27230207
eCl@ss 7.0 27230207
eCl@ss 8.0 27143136
ETIM
ETIM 2.0 EC001423
ETIM 3.0 EC001423
ETIM 4.0 EC001423
ETIM 5.0 EC001423
UNSPSC
UNSPSC 6.01 30211506
UNSPSC 7.0901 39121008
UNSPSC 11 39121008
UNSPSC 12.01 39121008
UNSPSC 13.2 43201553
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / cULus Recognized
Ex Approvals
ATEX / UL Listed / cUL Listed / cULus Listed
Approvals submitted
Approval details
UL Recognized
https://www.phoenixcontact.com/us/products/2708410
09/05/2014Page5/6
FO converters-PSI-MOS-RS232/FO 660 T-2708410
Approvals
cUL Recognized
cULus Recognized
Drawings
Application drawing
E T
ET
Redundantpointto
pointconnection
Point-to-pointconnection
FO
Application drawing
T T E
EEEE
...
E
Starstructure
FO
Slaves
Master
Application drawing
E T T
A AB B
.......
Master/Slavelinestructure
FO FOFO
Master Slave Slave
Application drawing
TT T ...
T T T
Redundantstructure
Master
FO
Slaves
Master/Slave line structure
