All statements, technical information and recommendations herein are based on tests we believe to be reliable, and
THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED
WARRANTIES OF MARKETABILITY AND FITNESS FOR PURPOSE. Sellers’ and manufacturers’ only obligation shall be to
replace such quantity of the product proved to be defective. Before using, user shall determine the suitability of the product
for its intended use, and the user assumes all risks and liability whatsoever in connection therewith. NEITHER SELLER NOR
MANUFACTURER SHALL BE LIABLE EITHER IN TORT OR IN CONTRACT FOR ANY LOSS OR DAMAGE, DIRECT,
INCIDENTAL, OR CONSEQUENTIAL, INCLUDING LOSS OF PROFITS OR REVENUE ARISING OUT OF THE USE OR
THE INABILITY TO USE A PRODUCT. No statement, purchase order or recommendations by seller or purchaser not
contained herein shall have any force or effect unless in an agreement signed by the officers of the seller and manufacturer.
PDS_GP_VOUltraSoft_0711
Gap Pad
®
VO Ultra Soft
Ultra Conformable,Thermally Conductive Material for Filling Air Gaps
www.bergquistcompany.com
The Bergquist Company -
North American Headquarters
18930 West 78th Street
Chanhassen, MN 55317
Phone: 800-347-4572
Fax: 952-835-0430
The Bergquist Company -
European Headquarters
Netherlands
Phone: 31-35-5380684
Fax: 31-35-5380295
The Bergquist Company -
Asia Headquarters
Hong Kong
Phone: 852-2690-9296
Fax: 852-2690-2344
Features and Benefits
• Thermal conductivity: 1.0 W/m-K
• Highly conformable, low hardness
• “Gel-like” modulus
• Decreased strain
• Puncture, shear and tear resistant
• Electrically isolating
Gap Pad VO Ultra Soft is recommended for
applications that require a minimum amount
of pressure on components.The viscoelastic
nature of the material also gives excellent
low-stress vibration dampening and shock
absorbing characteristics. Gap Pad VO Ultra
Soft is an electrically isolating material, which
allows its use in applications requiring
isolation between heat sinks and high-voltage,
bare-leaded devices.
Note: Resultant thickness is defined as the final gap
thickness of the application.
Typical Applications Include:
• Telecommunications
• Computer and peripherals
• Power conversion
• Between heat-generating semiconductors or magnetic components and a heat sink
Area where heat needs to be transferred to a frame, chassis, or other type of heat spreader
Configurations Available:
• Sheet form and die-cut parts
Building a Part Number Standard Options
1 2 3 5 8 4 6 9 7 10
250
200
150
100
50
0
Thickness vs. Thermal Resistance
Gap Pad VO Ultra Soft
Thermal Resistance (C-in2/W)
Resultant Thickness (mils)
Section A
Section B
Section C
Section D
Section E
NA = Selected standard option. If not selecting a standard
option, insert company name, drawing number, and
revision level.
GPVOUS = Gap Pad VO Ultra Soft Material
GPVOUS 0.100 AC 0816 NA
Note: To build a part number, visit our website at www.bergquistcompany.com.
Standard thicknesses available: 0.020", 0.040", 0.060",
0.080", 0.100", 0.125", 0.160", 0.200", 0.250"
AC = Adhesive on Sil-Pad® side, natural tack on one side
01 = No pressure sensitive adhesive, natural tack on one side
0816 = Standard sheet size 8" x 16", or
00 = custom configuration
– –
TYPICAL PROPERTIES OF GAP PAD VO ULTRA SOFT
PROPERTY IMPERIAL VALUE METRIC VALUE TEST METHOD
Color Mauve/Pink Mauve/Pink Visual
Reinforcement Carrier Fiberglass Fiberglass
Thickness (inch) / (mm) 0.020 to 0.250 0.508 to 6.350 ASTM D374
Inherent Surface Tack (1 sided) 1 1
Density (Bulk Rubber) (g/cc) 1.6 1.6 ASTM D792
Heat Capacity (J/g-K) 1.0 1.0 ASTM E1269
Hardness (Bulk Rubber) (Shore 00) (1) 5 5 ASTM D2240
Young's Modulus (psi) / (kPa) (2) 8 55 ASTM D575
Continuous Use Temp (°F) / (°C) -76 to 392 -60 to 200
ELECTRICAL
Dielectric Breakdown Voltage (Vac) 6000 6000 ASTM D149
Dielectric Constant (1000 Hz) 5.5 5.5 ASTM D150
Volume Resistivity (Ohm-meter) 1011 1011 ASTM D257
Flame Rating V-0 V- 0 U.L. 94
THERMAL
Thermal Conductivity (W/m-K) 1.0 1.0 ASTM D5470
THERMAL PERFORMANCE vs. STRAIN
Deflection (% strain) 10 20 30
Thermal Impedance (°C-in2/W) 0.040" (3) 1.97 1.87 1.68
1) Thirty second delay value Shore 00 hardness scale. 2)Young’s Modulus, calculated using 0.01 in/min. step rate of strain
with a sample size of 0.79 inch2. 3) The ASTM D5470 test fixture was used. The recorded value includes interfacial ther-
mal resistance. These values are provided for reference only. Actual application performance is directly related to the sur-
face roughness, flatness and pressure applied.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Bergquist Company:
GPVOUS-0.060-00-0816 GPVOUS-0.080-AC-0816 GPVOUS-0.080-01-0816 GPVOUS-0.040-01-0816 GPVOUS-
0.060-01-0816 GPVOUS-0.020-01-0816 GPVOUS-0.250-01-0816 GPVOUS-0.100-01-0816 GPVOUS-0.200-01-0816
GPVOUS-0.125-01-0816 GPVOUS-0.160-01-0816 GPVOUS-0.125-AC-0816