50 MHz to 4.0 GHz RF/IF Gain Block ADL5602 Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM GND Fixed gain of 20 dB Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block Input/output internally matched to 50 Integrated bias control circuit OIP3 of 42.0 dBm at 2.0 GHz P1dB of 19.3 dBm at 2.0 GHz Noise figure of 3.3 dB at 2.0 GHz Single 5 V power supply Low quiescent current of 89 mA Thermally efficient SOT-89 package ESD rating of 1.5 kV (Class 1C) (2) ADL5602 1 2 3 RFIN GND RFOUT 08190-001 BIAS Figure 1. GENERAL DESCRIPTION The ADL5602 is a broadband 20 dB linear amplifier that operates at frequencies up to 4 GHz. The device can be used in a wide variety of cellular, CATV, military, and instrumentation equipment. The ADL5602 is fabricated on an InGaP HBT process and has an ESD rating of 1.5 kV (Class 1C). The device is available in a thermally efficient SOT-89 package. The ADL5602 provides the highest dynamic range available from an internally matched gain block. This is accomplished by providing extremely low noise figures and very high OIP3 specifications simultaneously, across the entire 4 GHz frequency range. The ADL5602 consumes 89 mA on a single 5 V supply and is fully specified for operation from -40C to +85C. A fully populated RoHS-compliant evaluation board is available. The ADL5602 provides a gain of 20 dB, which is stable over frequency, temperature, power supply, and from device to device. The device is internally matched to 50 at the input and output, making the ADL5602 very easy to implement in a wide variety of applications. Only input/output ac coupling capacitors, power supply decoupling capacitors, and an external inductor are required for operation. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)2009-2013 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADL5602 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Basic Connections .......................................................................... 12 Functional Block Diagram .............................................................. 1 General Description ......................................................................... 1 Soldering Information and Recommended PCB Land Pattern ....................................................................... 12 Revision History ............................................................................... 2 W-CDMA ACPR Performance .................................................... 13 Specifications..................................................................................... 3 Evaluation Board ............................................................................ 14 Typical Scattering Parameters (S Parameters) .......................... 5 Outline Dimensions ....................................................................... 15 Absolute Maximum Ratings............................................................ 7 Ordering Guide .......................................................................... 15 ESD Caution .................................................................................. 7 Pin Configuration and Function Descriptions ............................. 8 Typical Performance Characteristics ............................................. 9 REVISION HISTORY 11/13--Rev. 0 to Rev. A Changes to Figure 2 ........................................................................... 8 Added Figure 15, Renumbered Sequentially ...............................11 Changes to Figure 17 .......................................................................12 Updated Outline Dimensions ........................................................15 6/09--Revision 0: Initial Version Rev. A | Page 2 of 16 Data Sheet ADL5602 SPECIFICATIONS VCC = 5 V and TA = 25C, unless otherwise noted. Table 1. Parameter OVERALL FUNCTION Frequency Range FREQUENCY = 50 MHz Gain Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 140 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 350 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 700 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure Conditions Min Typ 50 f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 19.0 50 MHz -40C TA +85C 4.75 V to 5.25 V 19.0 f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm Rev. A | Page 3 of 16 Max Unit 4000 MHz 18.3 18.0 27.5 -40.5 -46.1 2.9 dB dBm dBm dBc dBc dB 17.0 1.2 0.03 0.04 18.3 25.0 -45.1 -55.1 2.9 dB dB dB dB dBm dBm dBc dBc dB 19.7 0.20 0.31 0.01 20.0 36.5 -49.9 -83.7 3.0 dB dB dB dB dBm dBm dBc dBc dB 20.2 0.01 0.28 0.01 20.1 38.5 -50.3 -78.4 3.0 21.0 dB dB dB dB dBm dBm dBc dBc dB ADL5602 Parameter FREQUENCY = 900 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 2000 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 2600 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 3500 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure FREQUENCY = 4000 MHz Gain vs. Frequency vs. Temperature vs. Supply Voltage Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Second Harmonic Third Harmonic Noise Figure Data Sheet Conditions Min Typ Max Unit 19.0 20.2 0.01 0.28 0.01 20.1 40.0 -59.4 -77.3 2.9 21.0 dB dB dB dB dBm dBm dBc dBc dB 50 MHz -40C TA +85C 4.75 V to 5.25 V 19.0 f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm 50 MHz -40C TA +85C 4.75 V to 5.25 V f = 1 MHz, output power (POUT) = 0 dBm per tone POUT = 0 dBm POUT = 0 dBm Rev. A | Page 4 of 16 19.5 0.04 0.35 0.04 19.3 42.0 -53.1 -60.7 3.3 dB dB dB dB dBm dBm dBc dBc dB 19.2 0.01 0.28 0.05 18.7 36.5 -52.8 -67.4 3.4 dB dB dB dB dBm dBm dBc dBc dB 19.3 0.03 0.37 0.07 17.4 31.5 -42.9 -66.4 3.8 dB dB dB dB dBm dBm dBc dBc dB 18.5 0.19 0.73 0.08 15.2 28.0 -44.1 -64.0 4.2 dB dB dB dB dBm dBm dBc dBc dB Data Sheet ADL5602 Parameter POWER INTERFACE Supply Voltage (VCC) Supply Current vs. Temperature Power Dissipation Conditions VCC Min Typ Max Unit 4.5 5 89 3 0.45 5.5 106 V mA mA W -40C TA +85C VCC = 5 V TYPICAL SCATTERING PARAMETERS (S PARAMETERS) VCC = 5 V and TA = 25C, the effects of the test fixture have been de-embedded up to the pins of the device. Table 2. Frequency (MHz) 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 S11 Magnitude (dB) -12.75 -8.98 -10.11 -11.97 -13.85 -15.69 -17.40 -19.17 -20.86 -22.52 -24.32 -26.07 -27.89 -30.79 -34.53 -42.59 -46.49 -34.26 -29.55 -25.87 -23.03 -21.25 -19.31 -17.72 -16.13 -14.81 -13.65 -12.68 -11.72 -10.92 -10.21 -9.58 -9.05 -8.52 -8.13 -7.76 -7.46 -7.19 -6.98 Angle () +32.81 -7.00 -34.04 -50.46 -62.42 -72.90 -81.30 -88.48 -97.45 -107.32 -112.89 -120.03 -128.79 -133.19 -136.03 -130.76 -2.93 +15.99 +9.83 +5.52 +1.85 +0.10 -1.89 -4.09 -6.53 -8.71 -10.01 -11.33 -12.65 -13.56 -14.37 -15.37 -15.74 -16.73 -17.13 -17.59 -17.76 -17.92 -17.84 S21 Magnitude (dB) 18.14 15.77 17.27 18.50 19.21 19.64 19.90 20.07 20.18 20.25 20.32 20.35 20.39 20.42 20.42 20.46 20.47 20.47 20.48 20.48 20.47 20.45 20.45 20.40 20.35 20.31 20.24 20.18 20.11 20.04 19.97 19.88 19.80 19.72 19.64 19.57 19.50 19.43 19.39 Angle () +163.00 -179.92 -169.01 -168.73 -171.01 -173.77 -176.45 -178.86 +178.79 +176.86 +174.84 +173.09 +171.35 +169.67 +167.93 +166.48 +164.85 +163.17 +161.77 +160.25 +158.65 +157.18 +155.50 +153.93 +152.44 +150.88 +149.35 +147.91 +146.40 +145.13 +143.86 +142.58 +141.40 +140.23 +139.13 +138.12 +137.16 +136.25 +135.31 Rev. A | Page 5 of 16 S12 Magnitude (dB) -25.27 -27.59 -26.11 -24.84 -24.14 -23.70 -23.43 -23.26 -23.14 -23.08 -23.00 -22.97 -22.93 -22.91 -22.91 -22.88 -22.88 -22.86 -22.86 -22.86 -22.89 -22.90 -22.92 -22.96 -23.04 -23.07 -23.16 -23.22 -23.32 -23.39 -23.49 -23.57 -23.69 -23.76 -23.87 -23.94 -24.05 -24.13 -24.18 Angle () -9.54 +4.56 +16.05 +16.55 +14.79 +12.89 +11.02 +9.65 +8.07 +7.11 +6.15 +5.24 +4.35 +3.72 +2.93 +2.30 +1.67 +0.98 +0.39 -0.21 -0.84 -1.43 -2.06 -2.72 -3.38 -4.04 -4.60 -5.06 -5.76 -6.16 -6.54 -6.93 -7.16 -7.45 -7.60 -7.80 -7.88 -7.91 -7.94 S22 Magnitude (dB) -8.96 -7.07 -7.89 -9.33 -10.87 -12.23 -13.56 -14.79 -15.99 -17.02 -18.21 -19.45 -20.73 -22.22 -23.91 -26.35 -29.40 -34.27 -40.86 -31.44 -26.19 -23.27 -20.70 -18.67 -16.92 -15.44 -14.14 -13.12 -12.04 -11.20 -10.49 -9.77 -9.21 -8.66 -8.26 -7.91 -7.56 -7.35 -7.13 Angle () -145.86 -178.96 +159.89 +147.22 +140.02 +136.16 +134.03 +132.79 +132.72 +133.33 +133.04 +135.06 +136.29 +136.96 +135.39 +136.07 +132.08 +116.48 +41.72 -10.36 -18.99 -22.34 -22.26 -24.44 -24.75 -25.79 -25.36 -25.73 -25.59 -25.40 -25.60 -25.59 -25.31 -25.42 -25.32 -24.96 -24.77 -24.46 -23.92 ADL5602 Frequency (MHz) 2000 2050 2100 2150 2200 2250 2300 2350 2400 2450 2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000 3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 3850 3900 3950 4000 Data Sheet S11 Magnitude (dB) -6.85 -6.74 -6.63 -6.66 -6.65 -6.69 -6.77 -6.87 -7.05 -7.22 -7.45 -7.64 -7.95 -8.29 -8.62 -8.95 -9.31 -9.67 -9.99 -10.28 -10.53 -10.69 -10.86 -10.91 -10.70 -10.57 -10.38 -9.92 -9.48 -8.98 -8.44 -7.92 -7.34 -6.79 -6.29 -5.82 -5.37 -4.93 -4.56 -4.23 -3.97 Angle () -18.00 -17.93 -17.57 -17.34 -17.26 -17.10 -16.90 -16.65 -16.25 -16.11 -16.00 -15.84 -15.66 -15.64 -15.95 -15.92 -16.23 -16.74 -17.33 -18.00 -19.16 -20.29 -21.94 -23.61 -25.42 -27.33 -29.60 -31.76 -34.25 -36.47 -38.18 -40.32 -42.20 -43.72 -45.15 -46.51 -47.51 -48.36 -48.94 -49.33 -49.71 S21 Magnitude (dB) 19.35 19.31 19.29 19.25 19.29 19.30 19.33 19.36 19.42 19.49 19.53 19.58 19.66 19.74 19.81 19.89 19.94 20.03 20.07 20.14 20.18 20.21 20.25 20.27 20.28 20.28 20.26 20.21 20.15 20.08 20.00 19.90 19.74 19.57 19.41 19.23 19.00 18.78 18.55 18.32 18.08 Angle () +134.44 +133.61 +132.74 +132.06 +131.19 +130.47 +129.54 +128.72 +127.81 +126.89 +125.82 +124.74 +123.61 +122.46 +121.20 +119.91 +118.47 +117.02 +115.47 +113.95 +112.28 +110.53 +108.77 +107.15 +105.16 +103.09 +101.20 +99.05 +96.98 +94.93 +92.80 +90.88 +88.69 +86.66 +84.80 +82.83 +81.05 +79.53 +78.02 +76.71 +75.39 Rev. A | Page 6 of 16 S12 Magnitude (dB) -24.26 -24.29 -24.37 -24.42 -24.40 -24.41 -24.42 -24.40 -24.38 -24.35 -24.31 -24.31 -24.25 -24.19 -24.17 -24.13 -24.08 -24.05 -24.07 -24.02 -24.03 -24.10 -24.04 -24.09 -24.18 -24.17 -24.22 -24.39 -24.49 -24.61 -24.72 -24.88 -25.15 -25.35 -25.56 -25.90 -26.16 -26.46 -26.81 -27.08 -27.50 Angle () -7.99 -7.91 -7.81 -7.58 -7.63 -7.59 -7.40 -7.46 -7.50 -7.46 -7.75 -7.86 -8.20 -8.54 -8.90 -9.35 -9.95 -10.55 -11.17 -11.71 -12.51 -13.72 -14.66 -15.23 -16.23 -17.39 -18.24 -20.06 -20.74 -21.69 -23.44 -24.35 -25.31 -26.95 -27.76 -28.90 -29.05 -30.35 -29.93 -31.04 -30.65 S22 Magnitude (dB) -6.96 -6.86 -6.75 -6.76 -6.78 -6.82 -6.87 -7.04 -7.20 -7.42 -7.66 -7.91 -8.29 -8.66 -8.97 -9.41 -9.87 -10.34 -10.83 -11.28 -11.69 -12.17 -12.54 -12.83 -12.92 -13.04 -12.99 -12.57 -12.19 -11.64 -11.00 -10.34 -9.59 -8.90 -8.29 -7.69 -7.12 -6.65 -6.20 -5.83 -5.50 Angle () -23.55 -22.70 -22.45 -22.01 -21.42 -20.82 -20.25 -19.57 -18.85 -18.17 -17.76 -17.18 -16.64 -16.15 -15.97 -15.67 -15.96 -16.17 -16.68 -17.66 -19.15 -21.42 -24.24 -27.07 -32.00 -36.71 -42.66 -48.16 -54.36 -59.44 -64.07 -68.43 -72.77 -76.09 -79.17 -81.76 -84.30 -86.42 -88.14 -89.69 -91.14 Data Sheet ADL5602 ABSOLUTE MAXIMUM RATINGS ESD CAUTION Table 3. Parameter Supply Voltage, VCC Input Power (re: 50 ) Internal Power Dissipation (Paddle Soldered) JA (Junction to Air) JC (Junction to Paddle) Maximum Junction Temperature Lead Temperature (Soldering, 60 sec) Operating Temperature Range Storage Temperature Range Rating 6.5 V 16 dBm 600 mW 30.7C/W 5.0C/W 150C 240C -40C to +85C -65C to +150C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Rev. A | Page 7 of 16 ADL5602 Data Sheet PIN CONFIGURATION AND FUNCTION DESCRIPTIONS RFIN 1 GND 2 RFOUT 3 ADL5602 (2) GND NOTES 1. EXPOSED PADDLE. INTERNALLY CONNECTED TO GND. SOLDER TO A LOW IMPEDANCE GROUND PLANE. 08190-002 TOP VIEW (Not to Scale) Figure 2. Pin Configuration Table 4. Pin Function Descriptions Pin No. 1 2 3 Mnemonic RFIN GND RFOUT (2) Exposed Paddle Description RF Input. This pin requires a dc blocking capacitor. Ground. Connect this pin to a low impedance ground plane. RF Output and Supply Voltage. DC bias is provided to this pin through an inductor that is connected to the external power supply. The RF path requires a dc blocking capacitor. Exposed Paddle. Internally connected to GND. Solder to a low impedance ground plane. Rev. A | Page 8 of 16 Data Sheet ADL5602 30 40 28 OIP3 35 45 26 35 -40C 30 24 P1dB (dBm) 30 25 GAIN 20 P1dB 15 +85C 25 22 20 20 -40C 15 18 +25C 10 16 10 +85C 0 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 5 14 3.6 4.0 FREQUENCY (GHz) 0 4.0 12 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 FREQUENCY (GHz) Figure 3. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency 08190-006 NF 5 Figure 6. P1dB and OIP3 vs. Frequency and Temperature 21.0 44 900MHz 42 20.5 700MHz 350MHz 40 20.0 38 -40C 19.5 36 +25C OIP3 (dBm) GAIN (dB) 40 +25C OIP3 (dBm) 45 08190-003 NF, GAIN, P1dB, OIP3 (dB, dBm) TYPICAL PERFORMANCE CHARACTERISTICS 19.0 +85C 18.5 18.0 2000MHz 34 2600MHz 32 30 28 26 17.5 3500MHz 24 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FREQUENCY (GHz) 20 -5 -3 -1 1 3 5 7 9 11 13 15 17 4.0 POUT PER TONE (dBm) Figure 4. Gain vs. Frequency and Temperature Figure 7. OIP3 vs. Output Power (POUT) and Frequency 0 5.6 -5 5.2 -10 4.8 NOISE FIGURE (dB) -15 S11 -20 S12 -25 -30 -35 +85C 4.4 4.0 +25C 3.6 3.2 -40C 2.8 -40 S22 2.4 -45 -50 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 FREQUENCY (GHz) 2.0 08190-005 S-PARAMETERS (dB) 50MHz 08190-007 0 08190-004 16.5 4000MHz 140MHz 22 08190-008 17.0 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 FREQUENCY (GHz) Figure 5. Input Return Loss (S11), Output Return Loss (S22), and Reverse Isolation (S12) vs. Frequency Figure 8. Noise Figure vs. Frequency and Temperature Rev. A | Page 9 of 16 ADL5602 Data Sheet -30 45 40 -40 35 -50 PERCENTAGE (%) HARMONICS (dBc) H2 -60 H3 -70 30 25 20 15 10 -80 0 0.5 2.0 1.5 1.0 2.5 3.5 3.0 0 08190-009 -90 4.0 FREQUENCY (GHz) 32 34 38 36 40 42 44 46 50 48 OIP3 (dBm) Figure 9. Single Tone Harmonics vs. Frequency , POUT = 0 dBm 08190-020 5 Figure 12. OIP3 Distribution at 2000 MHz, POUT = 0 dBm 80 30 70 25 PERCENTAGE (%) PERCENTAGE (%) 60 20 15 10 50 40 30 20 5 0 18.8 19.0 19.4 19.2 19.6 19.8 20.0 GAIN (dB) 2.6 08190-010 0 2.8 3.2 3.0 3.4 3.6 4.0 3.8 NOISE FIGURE (dB) 08190-021 10 Figure 13. Noise Figure Distribution at 2000 MHz Figure 10. Gain Distribution at 2000 MHz 98 30 96 5.25V SUPPLY CURRENT (mA) 94 20 15 10 92 5V 90 88 86 4.75V 84 5 0 18.5 18.7 18.9 19.1 19.3 19.5 19.7 P1dB (dBm) 19.9 80 -40 -30 -20 -10 0 10 20 30 40 50 60 70 TEMPERATURE (C) Figure 11. P1dB Distribution at 2000 MHz Figure 14. Supply Current vs. Temperature Rev. A | Page 10 of 16 80 90 08190-014 82 08190-011 PERCENTAGE (%) 25 Data Sheet ADL5602 100 98 94 92 90 +25C 88 +85C 86 -40C 84 82 80 -5 -3 -1 1 3 5 7 9 11 13 15 17 19 21 POUT (dBm) 08190-100 SUPPLY CURRENT (mA) 96 Figure 15. Supply Current vs. POUT and Temperature VCC = 5 V Rev. A | Page 11 of 16 ADL5602 Data Sheet BASIC CONNECTIONS The basic connections for operating the ADL5602 are shown in Figure 16. Recommended components are listed in Table 5. The input and output should be ac-coupled with appropriately sized capacitors (device characterization was performed with 0.1 F capacitors). A 5 V dc bias is supplied to the amplifier through the bias inductor connected to RFOUT (Pin 3). The bias voltage should be decoupled using a 1 F capacitor, a 1.2 nF capacitor, and a 68 pF capacitor. GND VCC C6 (2) GND 1F ADL5602 SOLDERING INFORMATION AND RECOMMENDED PCB LAND PATTERN Figure 17 shows the recommended land pattern for the ADL5602. To minimize thermal impedance, the exposed paddle on the package underside should be soldered down to a ground plane along with Pin 2. If multiple ground layers exist, they should be stitched together using vias. For more information on land pattern design and layout, refer to the AN-772 Application Note, A Design and Manufacturing Guide for the Lead Frame Chip Scale Package (LFCSP). 1.80mm C5 1.2nF C4 68pF 2 3 C2 RFOUT 0.1F 0.1F 08190-015 1 RFOUT C1 GND RFIN RFIN L1 470nH 0.762mm Figure 16. Basic Connections 0.635mm 3.48mm 5.37mm 0.20mm 0.62mm 0.86mm 1.27mm 0.86mm 08190-101 1.50mm 3.00mm Figure 17. Recommended Land Pattern Table 5. Recommended Components for Basic Connections Frequency (MHz) 50 to 4000 C1 0.1 F C2 0.1 F L1 470 nH (Coilcraft 0603LS-NX or equivalent) Rev. A | Page 12 of 16 C4 68 pF C5 1.2 nF C6 1 F Data Sheet ADL5602 W-CDMA ACPR PERFORMANCE -45 -50 -55 -60 -65 -70 -75 -80 -20 -15 -10 -5 POUT (dBm) 0 5 10 08190-017 The ADL5602 achieves an ACPR of -75 dBc at -5 dBm output, at which point device noise and not distortion is beginning to dominate the power in the adjacent channels. At an output power of +5 dBm, ACPR is still very low at -61 dBc, making the device particularly suitable for PA driver applications. -40 ACPR AT 5MHz CARRIER OFFSET (dBc) Figure 18 shows a plot of adjacent channel power ratio (ACPR) vs. POUT for the ADL5602. The signal type being used is a single W-CDMA carrier (Test Model 1-64) at 2140 MHz. This signal is generated by a very low ACPR source. ACPR is measured at the output by a high dynamic range spectrum analyzer, which incorporates an instrument noise correction function. Figure 18. ACPR vs. POUT, Single Carrier W-CDMA (Test Model 1-64) at 2140 MHz Evaluation Board Rev. A | Page 13 of 16 ADL5602 Data Sheet EVALUATION BOARD Figure 20 shows the schematic for the ADL5602 evaluation board. The board is powered by a single 5 V supply. GND VCC C6 (2) GND 1F The components used on the board are listed in Table 6. Power can be applied to the board through clip-on leads (VCC and GND). ADL5602 C5 1.2nF C4 68pF 3 C2 RFOUT 0.1F 08190-019 0.1F 1 RFOUT C1 GND RFIN RFIN L1 470nH 2 08190-018 Figure 20. Evaluation Board Schematic Figure 19. Evaluation Board Layout (Top) Table 6. Evaluation Board Configuration Options Component C1, C2 L1 VCC and GND C4, C5, C6 Description AC-coupling capacitors DC bias inductor Clip-on terminals for power supply Power supply decoupling capacitors Default Value 0.1 F, 0402 470 nH, 0603 (Coilcraft 0603LS-NX or equivalent) C4 = 68 pF, 0603; C5 = 1.2 nF, 0603; C6 = 1 F, 1206 Rev. A | Page 14 of 16 Data Sheet ADL5602 OUTLINE DIMENSIONS 1.75 1.55 (2) 4.25 3.94 1 2 2.413 2.380 2.337 2.60 2.30 3 1.20 0.75 1.50 TYP 1.270 1.252 1.219 BOTTOM VIEW 0.635 0.569 0.508 3.00 TYP TOP VIEW 2.29 2.14 4.60 4.40 1.60 1.40 0.44 0.35 END VIEW 0.52 0.32 COMPLIANT TO JEDEC STANDARDS TO-243 09-12-2013-C PKG-003480 0.56 0.36 Figure 21. 3-Lead Small Outline Transistor Package [SOT-89] (RK-3) Dimensions shown in millimeters ORDERING GUIDE Model 1 ADL5602ARKZ-R7 ADL5602-EVALZ 1 Temperature Range -40C to +85C Package Description 3-Lead SOT-89, 7" Tape and Reel Evaluation Board Z = RoHS Compliant Part. Rev. A | Page 15 of 16 Package Option RK-3 ADL5602 Data Sheet NOTES (c)2009-2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D08190-0-11/13(A) Rev. A | Page 16 of 16