3. Measured on 8.3mS single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
FEATURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 5000 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
TVS
5KP
SERIES
R-6
5000 WATT PEAK POWER 8.0 WATTS STEADY STATE
GPP TRANSIENT VOLTAGE SUPPRESSOR
Dimensions in inches and (millimeters)
MAXIMUM RATINGS
(At TA = 25oC unless otherwise noted)
DEVICES FOR BIPOLAR APPLICA TIONS
For Bidirectional use C or CA suffix for types 5KP5.0 thru 5KP110
Electrical characteristics apply in both direction
2002-12
Ratings at 25 oC ambient temperature unless otherwise specified.
NOTES :
2. Mounted on copper pad area of 0.8 X 0.8” ( 20 X 20mm ) per Fig. 5
1. Non-repetitive current pulse, per Fig.3 and derated above T
A
= 25
o
C per Fig.2.
T
J
, T
STG
-55 to + 150
0
C
Operating and Storage Temperature Range
RATINGS
Peak Pulse Current with a 10/1000uS waveform (Note 1, Fig. 3)
Peak Forward Surge Current, 8.3ms single half sine wave-
superimposed on rated load( JEDEC METHOD ) (Note 3)
Steady State Power Dissipation at T
L
= 75
o
C lead lengths
0.375” (9.5mm) (Note 2)
SYMBOL
P
M(AV)
I
FSM
Amps
UNITS
Instantaneous Forward Voltage at 100A, (Note 3)
Watts
Peak Pulse Power Dissipation with a 10/1000uS
waveform (Note 1, FIG.1) Minimum 5000
8.0
400
VALUE
P
PPM
Watts
I
PPM
AmpsSEE TABLE 1
V
F
3.5 Volts
.360 (9.1)
.340 (8.6)DIA.
.052 (1.3)
.048 (1.2)DIA.
1.0 (25.4)
MIN.
.340 (8.6)
.360 (9.1)
1.0 (25.4)
MIN.