SEK IEC 60 603-13 Number of contacts 6--64 SMC male header with straight solder pins, kinked Drawing SMC male header No. of contacts 6 10 14 16 20 24 26 30 34 40 50 60 64 Dimensions in mm A C D 26.9 32.0 37.1 39.6 44.7 49.8 52.3 57.7 62.5 70.1 82.8 95.5 100.6 22.86 27.94 33.02 35.56 40.64 45.72 48.26 53.34 58.42 66.04 78.74 91.44 96.52 12.45 17.53 22.61 25.15 30.23 35.91 37.85 43.83 48.01 55.63 68.33 81.03 86.11 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 2.54 E F x 2= x 4= x 6= x 7= x 9= x 11 = x 12 = x 14 = x 16 = x 19 = x 24 = x 29 = x 31 = 5.08 36.9 40.3 10.16 42.0 45.4 15.24 47.1 50.4 17.78 49.6 53.0 22.86 54.7 58.1 27.94 59.8 63.2 30.48 62.3 65.7 35.56 68.2 68.6 40.64 72.5 75.8 48.26 80.1 83.5 60.96 92.8 96.2 73.66 105.5 108.9 78.74 110.6 113.9 G SEK Identification Short levers for use with female connector without strain relief clamp Long levers No. 1 contact for use with female connector with strain relief clamp No. 2 contact Marking No. 1 contact No. 1 contact Board drillings No. 2 contact l Kinked contact: pcb thickness from 1.50 to 1.94 mm after Cu + Sn plating with non-remelted through holes o 0.80 to o 0.95 mm. Max. insertion force = 125 N. Min. retention force = 6 N. Non-kinked contact: Solder pins for pcb connections o 1 0.1 mm as per IEC 60 603-13. 1) o polarization slot N for 6, 10 or 14 way male header 2) 3) o polarization slot for 6 way male header N Pitch tolerance: 0.1 08 43