MPTC-RA, MPSC-RA SERIES
(5.00 mm) .197"(PWR) (2.00 mm) .079"(SIG)
MPTC–01–80–01–01–01–L–RA–SD
MPSC–01–24–01–01–01–L–RA–SD
WWW.SAMTEC.COM
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
SPECIFICATIONS
For complete specifications see
www.samtec.com?MPTC or
www.samtec.com?MPSC
Insulator Material:
Black LCP
Terminal/Contact Material:
Signal: Phosphor Bronze
Power: Copper Alloy
Plating:
Sn or Au over
50 µ" (1.27 µm) Ni
Operating Temp Range:
-55 °C to +105 °C
Voltage Rating:
Power:
600 VAC/848 VDC
Signal:
450 VAC/636 VDC
Standard Creepage:
(2.86 mm) .113"
(without -LC, power)
MPTC: (2.59 mm) .101"
(with -LC, power)
MPSC: (2.60 mm) .102"
(with -LC, power)
Standard Clearance:
MPTC: (2.72 mm) .107"
(without -LC, power)
(1.84 mm) .072"
(with -LC, power)
MPSC: (2.71 mm) .106"
(without -LC, power)
(1.85 mm) .073"
(with -LC, power)
RoHS Compliant:
Ye s
Lead–Free Solderable:
Ye s
Note: Some sizes, styles
and options are non-standard,
non-returnable.
MPTC-RA Mates with:
MPSC, MPCC
MPSC-RA Mates with:
MPTC
SIG
PINS
SIG
PINS
PWR
PINS
PWR
PINS
PWR
PINS
PWR
PINS
–01, –02
= Power Pins
Per End
–01, –02
= Power Pins
Per End
01
01
MPTC
MPSC
PLATING
OPTION
PLATING
OPTION
TAIL
LENGTH
TAIL
LENGTH
OTHER
OPTION
OTHER
OPTION
–SD or
–LC is a
required
callout
–SD
= Screw
Down
–LC
= Locking
Clip
(Manual
placement
required)
–SD or
–LC is a
required
callout
–SD
= Screw
Down
–LC
= Locking
Clip
(Manual
placement
required)
RA
RA
–L
= 10 µ" (0.25 µm)
Gold on contact,
Matte Tin on tail
(Power & Signal)
–T
= Matte Tin on contacts
and tail (Power),
Gold on contact,
Matte Tin on tail (Signal)
–L
= 10 µ" (0.25 µm)
Gold on contact,
Matte Tin on tail
(Power & Signal)
–T
= Matte Tin on contacts
and tail (Power),
Gold on contact,
Matte Tin on tail (Signal)
–24
= Total
Signal Pins
–80
= Total
Signal Pins
–24
= Total
Signal Pins
–80
= Total
Signal Pins
–01, –02
= Power Pins
Per End
–01, –02
= Power Pins
Per End
–01
= Use with
(1.60 mm)
.062"
Thick PCB
–03
= Use with
(2.36 mm)
.093"
Thick PCB
–01
= Use with
(1.60 mm)
.062"
Thick PCB
–03
= Use with
(2.36 mm)
.093"
Thick PCB
30 A RIGHT-ANGLE SIGNAL/POWER COMBO
(0.50)
.020 SQ
(0.41)
.016
(2.00) .0787
(1.88)
.074
(2.00)
.0787
(2.54)
.100
(2.72)
.107
(10.16)
.400
A
(15.06)
.593 (2.50)
.098
(3.56)
.140
DIA
(11.43)
.450
(4.44) .175
03 02 01
Note: Available standard
power pin combinations:
MPTC-01-XX-01 or
MPTC-02-XX-02.
Note: Available standard
power pin combinations:
MPSC-01-XX-01 or
MPSC-02-XX-02.
For complete scope
of recognitions see
www.samtec.com/quality
RECOGNITIONS
POWER
PINS/END
A
24 SIGNAL PINS 80 SIGNAL PINS
–01 (36.52) 1.438 (64.52) 2.540
–02 (46.52) 1.831 (74.52) 2.934
POWER
PINS/END
A
24
SIGNAL
PINS
80
SIGNAL
PINS
–01 (35.25)
1.388
(63.25)
2.490
–02 (45.25)
1.781
(73.25)
2.884
FILE NO. E111594
01 02 03 (1.88)
.074
(0.50) .020
(0.40)
.016 (2.00)
.0787
(12.45)
.490
(3.56) .140 DIA
(2.00)
.0787
(12.27)
.483
(15.70)
.618
A
(2.72)
.107
(3.25)
.128
(8.18)
.322
MPTC-RA/MPSC-RA
POWER
PINS
CURRENT
RATING
(PER CONTACT)
1 28.8 A
2 24.7 A
3 24.1 A
4 22.3 A
–T PLATING
Selectively loading contacts achieves customer
specific creepage and clearance requirements.
Contact asp@samtec.com
CREEPAGE
AND CLEARANCE
F-219
