3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series
• End-to-endstackable
• Offsetdual-beamcontactminimizesinsertionforce
• Moldedguidengersprovideintegratedalignment
• Alignmentwaferfortrueposition
• MateswithMP2-Pinverseheadersandelevated
inverseheaders,MP2-PXXXE,forextendedcard
applications
• ProtectivePush-CaponPress-FitOnly
• MeetsIEC61076-4-104Futurebus+®globalstandard
• SeetheRegulatoryInformationAppendix(RIA)
inthe“RoHScompliance”sectionof
www.3Mconnector.comforcompliance
information(RIAE1&C1apply)
Date Modified: May 13, 2010 TS-1117-B
Sheet 1 of 4
Physical
Insulation:
Material: High Temp LCP
Flammability: UL 94V-0
Color: Beige
Contact:
Material: Copper Alloy
Plating:
Underplating: 50 µ" [1.27 µm) Nickel
Wiping Area: See Ordering Information
Solder Tails: See Ordering Information
Electrical
Current Rating: Signal: 1.5 A – All contacts simultaneously
Insulation Resistance: 103 MΩ
Withstanding Voltage: 1000 V
AC
Environmental
Temperature Rating: -55°C to +125°C
Process Temperature Rating: 260°C (Prole per J-STD-020C)
Moisture Sensitivity Level: 1 (per J-STD-020C)
UL File No.: E68080 MetPak is a trademark of 3M Company.
Futurebus+ is a registered trademark of the Institute of Electrical and Electronic Engineers, Inc. (IEEE)
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series
TS-1117-B
Sheet 2 of 4
Ordering Information
MP2 - SXXXG - 5XXX - C - XXXXX
Rows
5 = 5 Rows
S = Socket Plating Options
(See Table 3)
Tail Length
(See Table 2)
C = Capped Solder Tail
Blank = Press-Fit
Contact Count
(See Table 1)
Guide Finger
Termination Style
M = Solder Tail (Press Peg)
P = Press-Fit (with Tail Cover)
Notes:
1. Refer to IEC 61076-4-104 Futurebus+® global standard.
2. “Press Fit” describes a contact tail having a compliant section designed to make a reliable electrical connection with a
plated through-hole (PTH) in a printed circuit board, typically a “back plane.”
*Contact 3M Sales Representative for information on special fill patterns and mono blocked pairs
mm
[inch]
Tolerance Unless Noted
0 0.0 0.00
mm ±3 ±0.3 ±0.13
[ ] Dimensions for Reference
Only
Contact Arrangement
1 = All rows filled*
ROW
C
D
E
POSITION X
B
A
"A"
2
POSITION 1
"B"
2.00
.079
TYP.
5.00
.197 TYP.
1.50
.059
CENTER LINE OF ROW A
23.30
.917
0.05 ±.05
.002 ±.002
23.0
.91
33.0
1.30
22.42
.883
13.50
.532
3.75
.148
13.30
.524
14.50
.571 11.30
.445
"C" TAIL LENGTH
2.00
.079
4X
21.95
.864
23.30
.917
PRESS-FIT AND SOLDER TAIL PRODUCT
(CAPPED)
MATED WITH MP2-PXXXE-5XXX-XXXX
ASSEMBLED TO PCB AND MATED WITH MP2-
PXXX-5XXX-XXXX
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series
TS-1117-B
Sheet 3 of 4
Table 1 - Connector & Row Lengths
Pin Count Dim. “A”
mm [inch]
Dim “B”
mm [inch] Rows Block
Count
030 11.95 [0.471] 10.00 [0.394] 5 1
060 23.95 [0.943] 22.00 [0.866] 5 2
090 35.95 [1.415] 34.00 [1.339] 5 3
120 47.95 [1.888] 46.00 [1.811] 5 4
150 59.95 [2.361] 58.00 [2.283] 5 5
180 71.95 [2.833] 70.00 [2.756] 5 6
210 83.95 [3.305] 82.00 [3.228] 5 7
240 95.95 [3.778] 94.00 [3.701] 5 8
Table 2 - Tail Length
Contact-to-PC Board Tail
Termination Option No. Dim. “C”
Solder Press-Fit*
1 4.35 [0.171]
1 3.53 [0.139]
*Compliant-Pin Tail
Table 3 - Plating & Regulatory
Plating Suffix Press-Fit Tails* Solder Tails Plating Composition
TG30 RIA E2 & C2 apply RIA E3 & C2 apply
0.76 µm [30 µ"] Min. Au Contact Area
2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
TR30 RIA E2 & C2 apply RIA E3 & C2 apply
0.08 µm [3 µ"] Min. Au Contact Area
0.67 µm [27 µ"] Min. PdNi Contact Area
2.54 µm [100 µ"] Min. SnPb Tail Area
1.27 µm [50 µ"] Min. Ni all over
KR RIA E1 & C1 apply RIA E1 & C1 apply
0.76 µm [30 µ"] Min. Au Contact Area
2.54 µm [100 µ"] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ"] Min. Ni all over
LR RIA E1 & C1 apply RIA E1 & C1 apply
0.08 µm [3 µ"] Min. Au Contact Area
0.67 µm [27 µ"] Min. PdNi Contact Area
2.54 µm [100 µ"] Min. Matt Whisker Mitigating Sn Tail Area
1.27 µm [50 µ"] Min. Ni all over
*Compliant-Pin Tail
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ MetPak™ 2-FB Socket
2 mm 5-Row, Right Angle, Solder or Press-Fit Tail, Guide Fingers MP2 Series
TS-1117-B
Sheet 4 of 4
RECOMMENDED PCB HOLE
MOUNTING PATTERN
Table 4 – HOLE PLATING For TG30 and TR30 FINISHES ONLY
HOLE Finished Dia. MM [in] Cu Thickness [mm [in] SnPb Thickness microns [µ"]Drilled Hole Dia. mm [in]
“D” 0.65-0.80 [.0256-.0315] 0.025 [.001] min. 15 [600] max. 0.81-0.86 [.0319-.0339]
Table 5 – HOLE PLATING For KR and LR FINISHES ONLY
HOLE Finished Dia.
MM [in]
Cu Thickness [mm
[in]
Immersion Matte
Sn Thickness
microns [µ”]
Electrolytic Au
Thickness
microns [µ"]
OSP ENTEK
Thickness
microns [µ”]
Drilled Hole
Dia. mm [in]
“D” 0.700-0.800
[.0276-.0315]
0.025-0.045
[0.001-0.002]
0.5 - 2.5
[20 - 100]
0.1 - 0.5
[4 - 20]
0.2 - 0.5
[8 - 20]
0.830-0.860 [.0330-
.0340] or 0.85 mm
[#66] TWIST DRILL
0.10
0.10
0.10
A1
"B"
4.00
.157
3.00
.118
1.00
.039
4.00
.157
"D" PLATED THRU HOLE
2.05 +.05
-.00
.081 +.002
-.000
UNPLATED THRU HOLE
1.50 +.10
-.00
.059 +.004
-.000
UNPLATED THRU HOLE
THESE HOLES CONSTITUTE MODULAR
REPEATING PATTERN
8.00
.315
2.00
.079
TYP.
2.00
.079
4X
UNPLATED THROUGH-HOLE
UNPLATED THROUGH-HOLE
“D” PLATED THROUGH-HOLE
Ø
Ø
ØØ
Ø
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.