HMC520LC4 v02.1208 8 GaAs MMIC I/Q MIXER 6 - 10 GHz Typical Applications Features The HMC520LC4 is ideal for: Wide IF Bandwidth: DC - 3.5 GHz * Point-to-Point and Point-to-Multi-Point Radio Image Rejection: 40 dB * Digital Radio LO to RF Isolation: 50 dB * VSAT High Input IP3: +23 dBm MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT RoHS Compliant 4 x 4 mm SMT Package Functional Diagram General Description The HMC520LC4 is a compact I/Q MMIC mixer in a leadless "Pb free" SMT package, which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The mixer utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated in a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This product is a much smaller alternative to hybrid style Image Reject Mixers and Single Sideband Upconverter assemblies. The HMC520LC4 eliminates the need for wire bonding allowing use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25 C, IF= 100 MHz, LO = +15 dBm* Parameter Min. Frequency Range, RF/LO Frequency Range, IF Max. Min. 7 20 1 dB Compression (Input) 30 Typ. Max. 7.1 - 8.5 DC - 3.5 Conversion Loss (As IRM) Image Rejection Typ. 6 - 10 GHz DC - 3.5 10 7 28 +12 GHz 9 dB 40 dB +12 dBm LO to RF Isolation 35 45 40 50 dB LO to IF Isolation 16 20 18 22 dB dBm IP3 (Input) +22 +23 Amplitude Balance 0.3 0.2 dB 4 4 Deg Phase Balance * Unless otherwise noted, all measurements performed as downconverter. 8 - 94 Units For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC520LC4 v02.1208 GaAs MMIC I/Q MIXER 6 - 10 GHz Data Taken As IRM With External IF Hybrid Conversion Gain vs. Temperature Image Rejection vs. Temperature 0 60 -10 +25C +85C -55C -15 8 40 30 +25C +85C -55C 20 10 -20 0 5 6 7 8 9 10 11 5 6 RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 9 10 11 10 11 10 11 0 RF LO -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 8 Return Loss 0 -10 +13 dBm +15 dBm +17 dBm +19 dBm -15 -10 -15 -20 -20 -25 5 6 7 8 9 10 11 5 6 RF FREQUENCY (GHz) 7 8 9 FREQUENCY (GHz) Input IP3 vs. LO Drive Input P1dB vs. Temperature 20 30 25 16 20 IP3 (dBm) P1dB (dBm) 7 RF FREQUENCY (GHz) 12 +25C +85C -55C 8 15 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm 10 4 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT IMAGE REJECTION (dB) CONVERSION GAIN (dB) 50 -5 5 0 0 5 6 7 8 9 RF FREQUENCY (GHz) 10 11 5 6 7 8 9 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 95 HMC520LC4 v02.1208 GaAs MMIC I/Q MIXER 6 - 10 GHz Quadrature Channel Data Taken Without IF Hybrid Isolations IF Bandwidth* -10 -5 LO/IF2 RESPONSE (dB) ISOLATION (dB) -20 LO/IF1 -30 RF/IF1 -40 RF/IF2 -50 -10 -15 -20 RETURN LOSS CONVERSION GAIN LO/RF -60 5 6 7 8 9 10 -25 0.5 11 1 RF FREQUENCY (GHz) 2 2.5 3 3.5 10 11 Phase Balance vs. LO Drive 2 10 PHASE BALANCE (degrees) AMPLITUDE BALANCE (dB) 1.5 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 1 0 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -1 -2 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm 5 0 -5 -10 5 6 7 8 9 10 11 5 6 RF FREQUENCY (GHz) 7 8 9 RF FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. LO Drive Upconverter Performance Sideband Rejection vs. LO Drive 0 SIDEBAND REJECTION (dBc) 0 CONVERSION GAIN (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 0 -5 -10 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -15 -20 -10 LO = +13 dBm LO = +15 dBm LO = +17 dBm LO = +19 dBm -20 -30 -40 -50 -60 5 6 7 8 9 10 RF FREQUENCY (GHz) 11 5 6 7 8 9 10 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid 8 - 96 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 11 HMC520LC4 v02.1208 GaAs MMIC I/Q MIXER 6 - 10 GHz Harmonics of LO MxN Spurious Outputs nLO Spur at RF Port nLO LO Freq. (GHz) 2 3 4 mRF 0 1 2 3 4 5.5 40 41 51 54 0 xx -6 37 21 61 6.5 44 48 45 69 1 31 0 47 60 68 7.5 52 62 55 68 2 90 69 72 69 90 8.5 52 66 58 55 3 90 90 90 79 90 9.5 46 59 69 47 4 90 90 90 99 90 10.5 47 60 62 xx LO = + 15 dBm Values in dBc below input LO level measured at RF Port. RF = 7.6 GHz @ -10 dBm LO = 7.5 GHz @ +15 dBm Data taken without IF hybrid All values in dBc below IF power level Absolute Maximum Ratings RF / IF Input +20 dBm LO Drive + 27 dBm Channel Temperature 150C Continuous Pdiss (T=85C) (derate 6.9 mW/C above 85C) 508 mW Thermal Resistance (RTH) (junction to package bottom) 128.2 C/W Storage Temperature -65 to +150 C Operating Temperature -55 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND Outline Drawing For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 1 8 - 97 HMC520LC4 v02.1208 GaAs MMIC I/Q MIXER 6 - 10 GHz Pin Descriptions MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 98 Pin Number Function Description 1, 2, 6-8, 10, 13, 17-24 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 3, 5, 12, 14, 16 GND These pins and package bottom must be connected to RF/DC ground. 4 RF This pin is AC coupled and matched to 50 Ohms from 6 to 10 GHz. 9 IF1 11 IF2 15 LO Interface Schematic This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 3mA of current or part non-function and possible part failure will result. This pin is AC coupled and matched to 50 Ohms from 6 to 10 GHz. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC520LC4 v02.1208 GaAs MMIC I/Q MIXER 6 - 10 GHz Evaluation PCB List of Materials for Evaluation PCB 109998 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 - J4 PCB Mount SMA Connector, Johnson U1 HMC520LC4 PCB [2] 109996 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT 8 8 - 99